All CNC and Manual Machine Tool List - Haas, Okuma, Mori, Mazak, OKK, Daewoo, Doosan

All Machines Available By Type

Machine Tools 24/7 is your one stop location source for used machinery.

MachineID TypeMachine Year Manufacturer Model Control Condition UnderPower ShortSpecs List Code Quote Featured Photos Key1 Key2 Key3 Key4 Key5 Kdesc1 Kdesc2 Kdesc3 Kdesc4 Kdesc5

9078 AUTO CHUCKERS, SINGLE SPINDLE 1965 Warner and Swasey 2AB 3380 Good Yes 1965 Warner and Swasey 2AB 3380 A7113 12,500.00 0 Yes 6" Swing Turret Stoke Slide Stroke Max. Length HP

9121 AUTO CHUCKERS, SINGLE SPINDLE Warner and Swasey 2AC M-3200 Fair No Warner and Swasey 2AC M-3200 A7113 0 Yes 19 1/4" 18" 25 Swing Turret Stoke Slide Stroke Max. Length HP

7989 AUTO CHUCKERS, SINGLE SPINDLE Warner and Swasey 2AC M-3920 Very Good Yes Warner and Swasey 2AC M-3920 A7113 9,500.00 0 Yes 19 1/4" 18" 25 Swing Turret Stoke Slide Stroke Max. Length HP

8762 AUTO SCREW MACHINES, MULTI. SPINDLE 1966 Acme-Gridley RB-8 Good Yes 1966 Acme-Gridley RB-8 A8006 49,500.00 0 Yes 2 5/8" 8" 982 40 8 Max. Dia. Length RPM HP Spindles

8916 AUTO SCREW MACHINES, MULTI. SPINDLE Acme-Gridley RB-6 Good Yes Acme-Gridley RB-6 A8006 14,500.00 0 Yes 2 5/8" 11" 1,065 40 6 Max. Dia. Length RPM HP Spindles

8769 AUTO SCREW MACHINES, MULTI. SPINDLE 1967 Conomatic Model CS Good Yes 1967 Conomatic Model CS A8006 24,500.00 0 Yes 3 1/4" 8" 982 40 8 Max. Dia. Length RPM HP Spindles

8197 AUTO SCREW MACHINES, SINGLE SPINDLE 1972 Brown and Sharpe #2 Very Good Yes 1 1/4" Capacity, 3.5" Chucking Length, 3,503 RPM, 7.5 HP, 8 Position Turret, Change Gears, Coolant, Vertical Cross Slide 1972 Brown and Sharpe #2 A8125 4,500.00 -1 Yes 1 Max. Dia. Length RPM Tools HP

9352 AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL 1993 Citizen E-32 Type IV Mitsubishi Meldas 330 HLC Good Yes Max. Dia. 1.26", Max Length 12.6", 130 - 6,000 RPM, 9.8 HP, Sub Spindle, Live Tool Machine, Iemica Boss 542/37 Barfeed, Many Extras 1993 Citizen E-32 Type IV Mitsubishi Meldas 330 HLC A8175MS 38,500.00 0 Yes 1.26" 12.6" 6,000 7.5 20 Max. Dia. Length RPM HP Tools

9942 AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL 1999 Citizen L-20 Type VII Cincom System L Good Yes Max. Work Dia., 0.787", Max. Length 7.87", 8,000 RPM, 2 HP, Live Tooling, Sub-Spindle, FMB Barfeed, NOTE: Machine Ran for Two (2) Days Only. (lost contract for job) 1999 Citizen L-20 Type VII Cincom System L A8175MS 79,900.00 0 0.787" 8.1" 10,000 2 22 Max. Dia. Length RPM HP Tools

10100 AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL 2000 Hardinge Conquest ST-225 B Fanuc 18iT Very Good Yes 2000 Hardinge Conquest ST-225 B Fanuc 18iT A8175MS 52,500.00 0 Yes 1" 9.65" 8,000 7.3 16 Max. Dia. Length RPM HP Tools

9754 AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL 1984 Star VNC-20 Fanuc 3T Yes 1984 Star VNC-20 Fanuc 3T A8175MS -1 On Way 3/4" 6" 7,500 5 18 Max. Dia. Length RPM HP Tools

9789 AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL 2000 Star SV-32J Fanuc 18iT Very Good Yes 2000 Star SV-32J Fanuc 18iT A8175MS ######## 0 Yes 1.25" 12.203" 7,000 10 12 Max. Dia. Length RPM HP Tools

10268 AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL 2005 Tsugami BE-19B III Fanuc 32iA Excellent Yes Work Diameter 0.118" - 0.748", 200 - 12,000 RPM, 5 HP Main 2.95 HP Sub, Nice Tooling Package, 6,000 Run Time Hours 2005 Tsugami BE-19B III Fanuc 32iA A8175MS 86,500.00 0 Yes 0.118" 6.69" 12,000 5 23 Max. Dia. Length RPM HP Tools

9201 AUTO SCREW MACHINES, SWISS, CNC-SUB SPINDLE 1988 Tsugami NP-11 Fanuc 0T Good Yes 1988 Tsugami NP-11 Fanuc 0T A8175S 14,500.00 0 Yes 0.475" 4.724" 12,000 Max. Dia. Length RPM

8636 AUTOMATIC SCREW MACHS., MULT. SPDL., NC and CNC 1997 Mitsubishi M-T42E Fanuc 15TTF Very Good Yes 1997 Mitsubishi M-T42E Fanuc 15TTF A8050 ######## 0 Yes 3 1/4" 4.7" 2,800 3" 6 Max. Dia. Length RPM Spindle Bore Spindles

8635 AUTOMATIC SCREW MACHS., MULT. SPDL., NC and CNC 1996 Mitsubishi M-T35E Fanuc 15TTF Very Good Yes 1996 Mitsubishi M-T35E Fanuc 15TTF A8050 ######## 0 Yes 3" 4.7" 2,800 3" 6 Max. Dia. Length RPM Spindle Bore Spindles

9070 BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL 2003 Haas Servo Bar 300 Very Good No 2003 Haas Servo Bar 300 B1120 4,950.00 0 Yes 3 1/8" 60" 1 Max. Bar Length Tubes

6416 BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL 2004 Haas Servo Bar 300 Excellent Yes Bar Capacity 1/4" to 3-1/8", Maximum Bar Length 60", Barfeed in Very Good Condition 2004 Haas Servo Bar 300 B1120 6,500.00 -1 Yes 3 1/8" 60" 1 Max. Bar Length Tubes

9806 BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL 2003 Iemca Prodigy 547/21 Excellent No 2003 Iemca Prodigy 547/21 B1120 8,500.00 -1 Yes 1.85039" 6' 1 Max. Bar Length Tubes

8195 BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL 2002 Iemca AS 325 Type 52 Excellent Yes 0.118" to 0.98425" Capacity, 205" Bar Length 2002 Iemca AS 325 Type 52 B1120 14,000.00 -1 Yes 0.98425" 205" 1 Max. Bar Length Tubes

10167 BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL 200? LNS Quick Load Servo S3 Very Good No 200? LNS Quick Load Servo S3 B1120 -1 On Way 4" 63" 1 Max. Bar Length Tubes

9985 BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL 1996 LNS Sprint S2 Good Yes 1996 LNS Sprint S2 B1120 8,200.00 0 Yes 3 1/8" 73" 1 Max. Bar Length Tubes

9338 BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL 1992 LNS Sprint 2 HydroBar Good Yes 1/2" to 3 1/8" Capacity, 12' Bar Length, Bar Storage Rack, Auto Load, PLC Interface, Extra Push Rods, Bar Blocks, Complete Hydraulics 1992 LNS Sprint 2 HydroBar B1120 6,800.00 0 Yes 3 1/8" 12' 1 Max. Bar Length Tubes

8310 BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL 2001 LNS Quick Load Servo S2 Like New 2001 LNS Quick Load Servo S2 B1120 12,500.00 -1 Yes 2 1/2" 55" 1 Max. Bar Length Tubes

9491 BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL 1992 LNS Sprint 2 HydroBar Good No 1/2" to 3 1/8" Capacity, 12' Bar Length, Bar Storage Rack, Auto Load, PLC Interface, Extra Push Rods, Bar Blocks, Complete Hydraulics 1992 LNS Sprint 2 HydroBar B1120 7,500.00 -1 Yes 3 1/8" 12' 1 Max. Bar Length Tubes

6939 BENDERS, PIPE and TUBE 1999 Addison DB-120 Very Good Yes 1999 Addison DB-120 B1804 ######## 0 No 4 1/2" 40" 157.6" 40 Capacity Max. Radius Max. Length HP

8145 BORING MILLS, HORIZ, FLOOR TYPE CNC and NC 1980/2000 Lucas 6" Delta Dynapath 50 Good Yes 1980/2000 Lucas 6" Delta Dynapath 50 B5420 ######## 0 Yes 6" 50 1,152 40 Spindle Taper RPM HP Table

8082 BORING MILLS, HORIZ, FLOOR TYPE CNC and NC 1981/2004 Mitsubishi MAF-150RS Fanuc 16M Good No 1981/2004 Mitsubishi MAF-150RS Fanuc 16M B5420 ######## 0 Yes 5.9" 50 1,450 40 62.99" x 62.99" Spindle Taper RPM HP Table

10089 BORING MILLS, HORIZ, FLOOR TYPE CNC and NC 1964/2007 Scharmann WF-132 Heidenhain TNC-320 Excellent Yes 1964/2007 Scharmann WF-132 Heidenhain TNC-320 B5420 ######## -1 Yes 5 1/4" 50 1,000 60 300" x 96" Spindle Taper RPM HP Table

7677 BORING MILLS, HORIZ, FLOOR TYPE CNC W-ATC 1981 Giddings and Lewis G-50-TX Giddings & Lewis 800B Good Yes 5" Spindle, 50 Taper, 1,400 RPM, 30 HP, 96" x 72" 36" x 56" Travels, Two (2) 48" x 72" Pallet Shuttle Tables, Full Forth Rotary Table, 100 ATC, Steel Way Covers, Chip Conveyor 1981 Giddings and Lewis G-50-TX Giddings & Lewis 800B B5420A ######## -1 Yes 5" 50 1,400 30 48" x 72" Spindle Taper RPM HP Table

7393 BORING MILLS, HORIZ, FLOOR TYPE CNC W-ATC 1981 Mitsubishi MQF-150 Allen Bradley 7320 Neds Repair No 5.905" Spindle, 50 Taper, 2,000 RPM, 50 HP, 137.79" x 86.61" x 13.77" x 27.55" Travels, 42" x 140" Table, Hydrostatic Bearings All Axes, Full Three Axis NC Control, Chip Conveyor 1981 Mitsubishi MQF-150 Allen Bradley 7320 B5420A 95,000.00 -1 Yes 5.905" 50 2,000 50 42" x 140" Spindle Taper RPM HP Table

9286 BORING MILLS, HORIZ, TABLE TYPE 1964 Bullard Model 75 Very Good Yes 1964 Bullard Model 75 B5500 26,500.00 0 Yes 5" 50 1,800 50 84" x 48" Spindle Taper RPM HP Table

9883 BORING MILLS, HORIZ, TABLE TYPE 1986/2010 Cincinnati-Gilbert Model D Re-Built To New Yes 1986/2010 Cincinnati-Gilbert Model D B5500 ######## 0 Yes 6" 50 1,130 40 60" x 120" Spindle Taper RPM HP Table

8337 BORING MILLS, HORIZ, TABLE TYPE Giddings and Lewis 300-T Very Good Yes Giddings and Lewis 300-T B5500 36,500.00 0 Yes 3" 5 MT 1,600 10 72" x 36" Spindle Taper RPM HP Table

9886 BORING MILLS, HORIZ, TABLE TYPE 1978 Giddings and Lewis H-5-T Very Good Yes 1978 Giddings and Lewis H-5-T B5500 ######## 0 Yes 5" 50 1,020 40 48" x 122" Spindle Taper RPM HP Table

9136 BORING MILLS, HORIZ, TABLE TYPE 1975 Giddings and Lewis 70A-G5-T Very Good Yes 1975 Giddings and Lewis 70A-G5-T B5500 64,500.00 0 Yes 5" 50 975 40 96" x 48" Spindle Taper RPM HP Table

9660 BORING MILLS, HORIZ, TABLE TYPE 1967 Giddings and Lewis 70-D4-7 Good Yes 1967 Giddings and Lewis 70-D4-7 B5500 34,500.00 0 Yes 4" 50 1,300 20 78" x 48" Spindle Taper RPM HP Table

6636 BORING MILLS, HORIZ, TABLE TYPE 1967 Giddings and Lewis 330-T Good Yes 1967 Giddings and Lewis 330-T B5500 15,000.00 -1 Yes 3" 5 500 10 62" x 30" Spindle Taper RPM HP Table

9444 BORING MILLS, HORIZ, TABLE TYPE 1974 Giddings and Lewis 75-H6-T Good Yes 1974 Giddings and Lewis 75-H6-T B5500 99,500.00 0 Yes 6" 50 1,020 40 120" x 60" Spindle Taper RPM HP Table

7751 BORING MILLS, HORIZ, TABLE TYPE Giddings and Lewis 560T Good Yes Giddings and Lewis 560T B5500 50,000.00 0 Yes 5" 7 MT 1,500 40 164" x 72" Spindle Taper RPM HP Table

6635 BORING MILLS, HORIZ, TABLE TYPE 1952 Giddings and Lewis 350-T Good No 5" Spindle, # 6 Morse, 375 RPM, 15 HP, 60" x 120 Table, 108" x 60" x 36" x 96" Travels, Three (3) Axis DRO's, Outrigger Support 1952 Giddings and Lewis 350-T B5500 25,000.00 -1 Yes 5" 6 MT 375 15 60" x 120" Spindle Taper RPM HP Table

8234 BORING MILLS, HORIZ, TABLE TYPE 1965 Giddings and Lewis 65-H-6T Good Yes 1965 Giddings and Lewis 65-H-6T B5500 ######## 0 Yes 6" 50 1,020 30 60" x 144" Spindle Taper RPM HP Table

8231 BORING MILLS, HORIZ, TABLE TYPE 1969 Giddings and Lewis DA5-T5 Good Yes 1969 Giddings and Lewis DA5-T5 B5500 59,500.00 0 Yes 5" 6 MT 1,000 15 98" x 48" Spindle Taper RPM HP Table

8227 BORING MILLS, HORIZ, TABLE TYPE Giddings and Lewis 570-T Good Yes Giddings and Lewis 570-T B5500 26,000.00 0 Yes 7" 7 MT 300 140" x 60" Spindle Taper RPM HP Table

6637 BORING MILLS, HORIZ, TABLE TYPE 1948 Giddings and Lewis 330 Good Yes 1948 Giddings and Lewis 330 B5500 15,000.00 -1 Yes 3" 5 500 10 62" x 30" Spindle Taper RPM HP Table

7600 BORING MILLS, HORIZ, TABLE TYPE 1962 Giddings and Lewis 340-T Good Yes 1962 Giddings and Lewis 340-T B5500 59,500.00 0 No 4" 5 MT 600 25 48" x 98" Spindle Taper RPM HP Table

8235 BORING MILLS, HORIZ, TABLE TYPE 1994 Giddings and Lewis 70A-DP5-T Very Good 1994 Giddings and Lewis 70A-DP5-T B5500 ######## 0 5" 50 975 25 60" x 144" Spindle Taper RPM HP Table

9443 BORING MILLS, HORIZ, TABLE TYPE 1967 Lucas 542B-120 Very Good Yes 1967 Lucas 542B-120 B5500 ######## 0 Yes 5" 50 1,200 25 48" x 122" Spindle Taper RPM HP Table

9922 BORING MILLS, HORIZ, TABLE TYPE 19?? Lucas 441B72 Very Good Yes 19?? Lucas 441B72 B5500 -1 Yes 4" 50 1,550 15 74" x 42" Spindle Taper RPM HP Table

10496 BORING MILLS, HORIZ, TABLE TYPE Lucas Model 30DC Very Good Yes Lucas Model 30DC B5500 89,500.00 0 Yes 5" 50 1,200 30 60" x 122" Spindle Taper RPM HP Table

9656 BORING MILLS, HORIZ, TABLE TYPE 1969 Lucas 441B72 Good Yes 1969 Lucas 441B72 B5500 39,500.00 0 Yes 4" 50 1,550 15 74" x 42" Spindle Taper RPM HP Table

9658 BORING MILLS, HORIZ, TABLE TYPE 1978 Nomura B-100LP Good Yes 2804 1981 - Nomura - B-100LP - 1978 Nomura B-100LP B5500 29,500.00 0 Yes 3.94" 50 1,200 15 55" x 40" Spindle Taper RPM HP Table

8933 BORING MILLS, HORIZ, TABLE TYPE 1967 PBR AF-90 Very Good Yes 3 1/2" Spindle, BT 45 Taper, 1,500 RPM, 15 HP, 58" x 48" x 22" x 60" Travels, 47" x 37" Rotary Table, Tailstock, 11" Spindle Support, Accurite III 2-Axis DRO, Coolant System, Pendant Control, Quick Change Spindle, Outer Bearing Column, Power Draw Bar, Facing Head Available 1967 PBR AF-90 B5500 -1 Yes 3 1/2" 45 1,500 15 47" x 37" Spindle Taper RPM HP Table

10395 BORING MILLS, HORIZ, TABLE TYPE 19?? Scharmann FB-100 Very Good Yes 19?? Scharmann FB-100 B5500 -1 Yes 4 3/4" 50 900 20 79" x 60" Spindle Taper RPM HP Table

9477 BORING MILLS, HORIZ, TABLE TYPE Scharmann FB-132 Good Yes Scharmann FB-132 B5500 39,500.00 0 Yes 4 3/4" 50 900 20 79" x 60" Spindle Taper RPM HP Table

9440 BORING MILLS, HORIZ, TABLE TYPE 1972 Scharmann FB-100 Good Yes 1972 Scharmann FB-100 B5500 34,500.00 0 Yes 4 3/4" 50 1,000 20 51 1/2" x 37 1/2" Spindle Taper RPM HP Table

8236 BORING MILLS, HORIZ, TABLE TYPE 1963 Skoda W-160A Good Yes 1963 Skoda W-160A B5500 ######## 0 Yes 6.29" 100 Metric 800 47.5 108.26" x 78.74" Spindle Taper RPM HP Table

10535 BORING MILLS, HORIZ, TABLE TYPE 1996 Summit 4 1/8" Very Good Yes 1996 Summit 4 1/8" B5500 89,500.00 0 Yes 4 1/8" 50 1,400 18 60" x 48" Spindle Taper RPM HP Table

10518 BORING MILLS, HORIZ, TABLE TYPE 1994 Summit HTM-4 Yes 1994 Summit HTM-4 B5500 0 Yes 4 1/8" 50 1,600 18 63" x 55" Spindle Taper RPM HP Table

8576 BORING MILLS, HORIZ, TABLE TYPE 1977 Tos W-100A Good Yes 1977 Tos W-100A B5500 35,000.00 0 Yes 3.94" 50 1,120 20 55" x 55" Spindle Taper RPM HP Table

9889 BORING MILLS, HORIZ, TABLE TYPE 1981 Tos WHN-138A Good Yes 1981 Tos WHN-138A B5500 79,500.00 0 Yes 5.12" 50 710 40 78" x 71" Spindle Taper RPM HP Table

9882 BORING MILLS, HORIZ, TABLE TYPE 1981 Tos WHN-138A Very Good Yes 1981 Tos WHN-138A B5500 ######## 0 Yes 5.12" 50 800 50 70.86" x 62.99" Spindle Taper RPM HP Table

9688 BORING MILLS, HORIZ, TABLE TYPE 1980 Toshiba (Shibaura) BT-10BR3 Very Good Yes 1980 Toshiba (Shibaura) BT-10BR3 B5500 63,900.00 0 Yes 3.94" 50 1,000 15 63" x 55" Spindle Taper RPM HP Table

9657 BORING MILLS, HORIZ, TABLE TYPE 1981 Toshiba (Shibaura) BT-10B Good Yes 1981 Toshiba (Shibaura) BT-10B B5500 39,500.00 0 Yes 3.94" 50 1,000 15 49.2" x 44.1" Spindle Taper RPM HP Table

9661 BORING MILLS, HORIZ, TABLE TYPE 1978 Union BFT-110 Good Yes Spindle 4.33", 50 Taper, 63" X 52" Indexing Table, 5.6 - 1,120 RPM, 20 HP, Power Draw Bar, Pendant Control, 3-Axis DRO's, Hardend & Ground Ways, Power Draw Bar, Way Covers, Tailstock 1978 Union BFT-110 B5500 42,500.00 0 Yes 4.33" 50 1,120 20 60" x 52" Spindle Taper RPM HP Table

9693 BORING MILLS, HORIZ, TABLE TYPE 1978 Union BFT-110/II Good Yes 1978 Union BFT-110/II B5500 29,500.00 0 Yes 4.33" 50 1,120 20 60" x 52" Spindle Taper RPM HP Table

9399 BORING MILLS, HORIZ, TABLE TYPE 1974 Wotan B-130-R Good Yes 1974 Wotan B-130-R B5500 79,500.00 0 Yes 5.11" 50 1,000 25 82" x 72" Spindle Taper RPM HP Table

9400 BORING MILLS, HORIZ, TABLE TYPE 1973 Wotan B-105-M Good Yes 1973 Wotan B-105-M B5500 45,900.00 0 Yes 5.11" 50 1,600 25 55" x 44" Spindle Taper RPM HP Table

9690 BORING MILLS, HORIZ, TABLE TYPE 1972 Wotan B-100-M Very Good Yes 1972 Wotan B-100-M B5500 54,500.00 0 Yes 4" 50 1,000 20 44" x 55" Spindle Taper RPM HP Table

8547 BORING MILLS, HORIZ, TABLE TYPE 1975 Wotan B-130-S Good Yes 1975 Wotan B-130-S B5500 58,000.00 0 Yes 5.11" 50 1,000 15 66.9" x 59.8" Spindle Taper RPM HP Table

8427 BORING MILLS, HORIZ, TABLE TYPE 1965 Wotan B-130 Good Yes 1965 Wotan B-130 B5500 39,500.00 0 Yes 5.11 50 1,000 15 66.9" x 59.8" Spindle Taper RPM HP Table

10521 BORING MILLS, HORIZ, TABLE TYPE 1984 Wotan B-150-S Good Yes 1984 Wotan B-150-S B5500 94,000.00 0 Yes 5.9" 50 1,000 15 79" x 71" Spindle Taper RPM HP Table

10520 BORING MILLS, HORIZ, TABLE TYPE 1984 Wotan B-130-S Good Yes 1984 Wotan B-130-S B5500 72,000.00 0 Yes 5.11" 50 1,000 15 66.9" x 59.8" Spindle Taper RPM HP Table

10140 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 1961/1984 DeVlieg JMC-4360 Centroid M 400 Good Yes 4" Spindle, 30 HP, 3,000 RPM, 50 Taper, 60" x 48" x 16" x 14" Travels, 48" x 60" Table, Centroid M 400, Remote Jog Handle, Steel Way Covers, Coolant Chiller, Probe System, Tapered and Straight Thread Milling, Coordinate System Rotation 1961/1984 DeVlieg JMC-4360 Centroid M 400 B5751 24,500.00 -1 Yes 4" 50 3,000 30 48" x 60" Spindle Taper RPM HP Table

9928 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 2009 Fermat (TOS) WHN-13.8 Heidenhain i530 New No 2009 Fermat (TOS) WHN-13.8 Heidenhain i530 B5751 ######## 0 Yes 5.11" 50 1,800 49 87" x 71" Spindle Taper RPM HP Table

7473 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 1980 Giddings and Lewis PC50-TX G&L 800 Good Yes 1980 Giddings and Lewis PC50-TX G&L 800 B5751 ######## 0 Yes 5" 50 1,120 30 96" x 48" Spindle Taper RPM HP Table

8232 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 1970/96 Giddings and Lewis 70-H5-T Heidenhain TNC-406 Good Yes 1970/96 Giddings and Lewis 70-H5-T Heidenhain TNC-406 B5751 ######## 0 Yes 5" 50 1,000 40 72" x 144" Spindle Taper RPM HP Table

8338 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 1954/89 Giddings and Lewis 350-T Allen Bradley 8400 Good Yes 1954/89 Giddings and Lewis 350-T Allen Bradley 8400 B5751 46,000.00 0 Yes 5" 6 MT 975 15 60" x 120" Spindle Taper RPM HP Table

10396 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 1994 Kuraki KBM-11A Fanuc 16M Excellent Yes 1994 Kuraki KBM-11A Fanuc 16M B5751 ######## -1 Yes 4.33" 50 1,500 25 41"x 37" Spindle Taper RPM HP Table

8652 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 1983 Kuraki KBT-1105 Fanuc 6M Good Yes 1983 Kuraki KBT-1105 Fanuc 6M B5751 ######## 0 Yes 4.33" 50 1,200 20 55.18" x 62.99" Spindle Taper RPM HP Table

7622 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 1994 Kuraki KBT-11 Fanuc 16M Very Good Yes 1994 Kuraki KBT-11 Fanuc 16M B5751 ######## 0 Yes 4.33" 50 1,500 25 37" x 41" Spindle Taper RPM HP Table

7482 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 1987 Lucas 30D CS GE Mark Centruy 2000 Needs Retrofitting Yes 1987 Lucas 30D CS GE Mark Centruy 2000 B5751 60,000.00 0 Yes 5" 50 1,200 30 60" x 100" Spindle Taper RPM HP Table

10519 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 1999 Stanko 2B622 Fanuc 16MB Very Good Yes 1999 Stanko 2B622 Fanuc 16MB B5751 ######## 0 Yes 5" 50 2,500 50 62.9" x 49.21 Spindle Taper RPM HP Table

8248 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 1999 Toshiba BP-110-P20 Tosnuc 888 Very Good Yes 1999 Toshiba BP-110-P20 Tosnuc 888 B5751 ######## 0 Yes 4.33" 50 3,000 30 55" x 80" Spindle Taper RPM HP Table

8320 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 1982/05 Toshiba BP-13P5 Fanuc 16MB Very Good Yes 1982/05 Toshiba BP-13P5 Fanuc 16MB B5751 ######## 0 Yes 5.19" 7 MT 1,000 30 59" x 118" Spindle Taper RPM HP Table

9398 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 1989 Union BFT-105 Heidenhain TNC-355 Good Yes 1989 Union BFT-105 Heidenhain TNC-355 B5751 ######## 0 Yes 4" 50 2,500 34 54" x 48" Spindle Taper RPM HP Table

10561 BORING MILLS, HORIZ, TABLE TYPE CNC and NC 1995 Union BFT-13/6 Fanuc 16iM Very Good Yes 1995 Union BFT-13/6 Fanuc 16iM B5751 89,500.00 0 Yes 5" 50 930 50 55.11" x 62.99" Spindle Taper RPM HP Table

9919 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 19?? Burgmaster HTC-330 L GE 550 Good Yes 19?? Burgmaster HTC-330 L GE 550 B5751A -1 Yes 5" 50 1,200 20 36" x 60" Spindle Taper RPM HP Table

9921 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 19?? Cincinnati 10 HC-1500 Acramatic 2.1 Big Blue Good 19?? Cincinnati 10 HC-1500 Acramatic 2.1 Big Blue B5751A -1 Yes 5.11" 50 4,000 60 31.25" x 64" Spindle Taper RPM HP Table

9920 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 19?? Cincinnati 10 HC-1500 Acramatic 2.1 Big Blue Good Yes 19?? Cincinnati 10 HC-1500 Acramatic 2.1 Big Blue B5751A -1 Yes 5.11" 50 4,000 60 31.25" x 64" Spindle Taper RPM HP Table

10437 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 1999 Daewoo Ace B-130 Fanuc 16M Very Good Yes 1999 Daewoo Ace B-130 Fanuc 16M B5751A ######## 0 Yes 5" 50 2,000 30 71" x 63" Spindle Taper RPM HP Table

9642 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 1997 Defum DBM-100N Fanuc OMC Good Yes 1997 Defum DBM-100N Fanuc OMC B5751A 99,500.00 0 Yes 4" 50 2,000 40 55" x 43" Spindle Taper RPM HP Table

10359 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 2005 Doosan DB-130C Fanuc 18iMB Very Good Yes 2005 Doosan DB-130C Fanuc 18iMB B5751A ######## 0 Yes 5.13" 50 2,500 35 62.99" x 70.86" Spindle Taper RPM HP Table

10258 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 2008 Femco BMC-110 R2 Fanuc 21iMB Excellent Yes 2008 Femco BMC-110 R2 Fanuc 21iMB B5751A ######## 0 Yes 4.33" 50 2,500 35 62.99" x 56.69" Spindle Taper RPM HP Table

10067 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 2009 Femco BMC-110 R2 Fanuc 21i Like New Yes 2009 Femco BMC-110 R2 Fanuc 21i B5751A ######## 0 Yes 4.33" 50 2,500 35 62.99" x 56.69" Spindle Taper RPM HP Table

10361 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 1996 Kuraki KBT-13DXA Fanuc 15M Very Good Yes 1996 Kuraki KBT-13DXA Fanuc 15M B5751A ######## 0 Yes 5.125" 50 2,500 35 62.99" x 70.87" Spindle Taper RPM HP Table

10372 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 1994 Kuraki KBM-11A Fanuc 16M Very Good Yes 1994 Kuraki KBM-11A Fanuc 16M B5751A ######## 0 Yes 4.33" 50 1,500 25 41.25" x 37.25" Spindle Taper RPM HP Table

10081 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 1988 Kuraki KH-63 Fanuc 11M Good Yes 1988 Kuraki KH-63 Fanuc 11M B5751A 35,000.00 0 Yes 3.94" 50 1,200 15 24" x 24" Spindle Taper RPM HP Table

6957 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 1997 Mitsubishi MHT 11/1416 Mitsubishi 520M Very Good Yes 1997 Mitsubishi MHT 11/1416 Mitsubishi 520M B5751A ######## 0 Yes 4.33" 50 2,500 30 63" x 51" Spindle Taper RPM HP Table

10069 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 2009 Poreba HBM-4 Fanuc 18iMB New Yes 2009 Poreba HBM-4 Fanuc 18iMB B5751A ######## 0 Yes 4.33" 50 3,500 25 60" x 48" Spindle Taper RPM HP Table

10563 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 2000 Toshiba BTD-13.R22 Tosnuc 888 Very Good Yes 2000 Toshiba BTD-13.R22 Tosnuc 888 B5751A ######## 0 Yes 5.12 50 2,500 40 70.8" x 86.66" Spindle Taper RPM HP Table

8662 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 2000 Toshiba BP-130-P40 Tosnuc 888 Very Good Yes 2000 Toshiba BP-130-P40 Tosnuc 888 B5751A ######## 0 Yes 5.12" 50 2,500 40 70" x 155" Spindle Taper RPM HP Table

10586 BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC 2002 Union KC-130 Heidenhain TNC-426 Very Good Yes 2002 Union KC-130 Heidenhain TNC-426 B5751A ######## 0 Yes 5.11 50 6,000 60 100" x 80" Spindle Taper RPM HP Table

7569 BORING MILLS, VERTICAL and VTL 1956 Bertram 60" Good Yes 1956 Bertram 60" B6006 59,500.00 0 Yes 60" 64" 48" 75 30 Table Swing U/R RPM HP

10625 BORING MILLS, VERTICAL and VTL 1950's Betts 144" Good Yes 1950's Betts 144" B6006 ######## 0 Yes 144" 150.78" 108" 20 75 Table Swing U/R RPM HP

8063 BORING MILLS, VERTICAL and VTL Betts 112" Good Yes Betts 112" B6006 ######## 0 Yes 112" 116" 54" 100 50 Table Swing U/R RPM HP

8392 BORING MILLS, VERTICAL and VTL 1976 Bullard 86" Dynatrol Very Good Yes 1976 Bullard 86" Dynatrol B6006 ######## 0 Yes 86" 98" 132" 120 75 Table Swing U/R RPM HP

8413 BORING MILLS, VERTICAL and VTL Bullard 36" Spiral Drive Godd Yes Bullard 36" Spiral Drive B6006 -1 Yes 36" 39" 24" 140 25 Table Swing U/R RPM HP

8420 BORING MILLS, VERTICAL and VTL Bullard 36" Spiral Drive Good Yes Bullard 36" Spiral Drive B6006 12,500.00 0 Yes 36" 39" 24" 140 25 Table Swing U/R RPM HP

8479 BORING MILLS, VERTICAL and VTL 1942 Bullard 36" Spiral Drive Very Good Yes 1942 Bullard 36" Spiral Drive B6006 15,500.00 0 Yes 36" 39" 24" 200 25 Table Swing U/R RPM HP

8564 BORING MILLS, VERTICAL and VTL Bullard 42" Spiral Drive Good Yes Bullard 42" Spiral Drive B6006 26,500.00 0 Yes 42" 54" 57" 100 25 Table Swing U/R RPM HP

8687 BORING MILLS, VERTICAL and VTL 1952 Bullard 54" Cutmaster Good Yes 1952 Bullard 54" Cutmaster B6006 49,500.00 0 Yes 54" 62" 44" 120 30 Table Swing U/R RPM HP

9761 BORING MILLS, VERTICAL and VTL Bullard 42" Spiral Drive Good Yes Bullard 42" Spiral Drive B6006 18,500.00 0 Yes 42" 54" 57" 100 25 Table Swing U/R RPM HP

9156 BORING MILLS, VERTICAL and VTL 1952 Bullard 36" Man-Au-Trol Fair No 1952 Bullard 36" Man-Au-Trol B6006 15,000.00 0 Yes 36" 46" 50" 300 30 Table Swing U/R RPM HP

10191 BORING MILLS, VERTICAL and VTL 1954 Bullard 42" Cutmaster Very Good Yes 1954 Bullard 42" Cutmaster B6006 26,500.00 0 Yes 42" 48" 37" 200 20 Table Swing U/R RPM HP

9726 BORING MILLS, VERTICAL and VTL 1954 Bullard 36" Cutmaster Good Yes 1954 Bullard 36" Cutmaster B6006 42,500.00 0 Yes 36" 45" 30" 180 25 Table Swing U/R RPM HP

10235 BORING MILLS, VERTICAL and VTL 1962 Bullard 56" Dynatrol Good Yes 1962 Bullard 56" Dynatrol B6006 59,500.00 0 Yes 56" 62" 40" 200 50 Table Swing U/R RPM HP

8124 BORING MILLS, VERTICAL and VTL 1958 Bullard 36" Cutmaster Very Good Yes 1958 Bullard 36" Cutmaster B6006 42,000.00 0 Yes 36" 45" 30" 180 30 Table Swing U/R RPM HP

9773 BORING MILLS, VERTICAL and VTL 1952 Bullard 42" Cutmaster Good Yes 1952 Bullard 42" Cutmaster B6006 34,500.00 0 Yes 42" 54" 37" 150 30 Table Swing U/R RPM HP

10190 BORING MILLS, VERTICAL and VTL 1966 Bullard 46" Dynatrol Good Yes 1966 Bullard 46" Dynatrol B6006 49,500.00 0 Yes 46" 58" 54" 250 50 Table Swing U/R RPM HP

10195 BORING MILLS, VERTICAL and VTL 1953 Bullard 42" Cutmaster Good Yes 1953 Bullard 42" Cutmaster B6006 79,500.00 0 Yes 42" 54" 37" 200 30 Table Swing U/R RPM HP

10222 BORING MILLS, VERTICAL and VTL 1953 Bullard 42" Cutmaster Good Yes 1953 Bullard 42" Cutmaster B6006 32,500.00 0 Yes 42" 54" 37" 200 50 Table Swing U/R RPM HP

9723 BORING MILLS, VERTICAL and VTL 1943 Bullard 36" Cutmaster Good Yes 1943 Bullard 36" Cutmaster B6006 29,900.00 0 Yes 36" 45" 30" 180 30 Table Swing U/R RPM HP

8067 BORING MILLS, VERTICAL and VTL 1946 Bullard 42" Spiral Drive Good Yes 42" 4-Jaw Chuck, 45" Swing - Side Up, 54" Swing Side Down, 37" Under Rail, 120 RPM, 30 HP, One (1) Five Sided Turret Head, One (1) Side Head 1946 Bullard 42" Spiral Drive B6006 17,500.00 0 Yes 42" 54" 33" 120 30 Table Swing U/R RPM HP

6223 BORING MILLS, VERTICAL and VTL 1954 Bullard 42" Cutmaster Good No 1954 Bullard 42" Cutmaster B6006 59,500.00 -1 Yes 42" 54" 37" 150 30 Table Swing U/R RPM HP

5869 BORING MILLS, VERTICAL and VTL 1973 Bullard 46" Dynatrol Very Good Yes 1973 Bullard 46" Dynatrol B6006 ######## 0 Yes 46" 58" 64" 333 50 Table Swing U/R RPM HP

6549 BORING MILLS, VERTICAL and VTL 1967 Bullard 36" Dynatrol Very Good Yes 1967 Bullard 36" Dynatrol B6006 59,500.00 0 Yes 36" 48" 54" 585 50 Table Swing U/R RPM HP

5860 BORING MILLS, VERTICAL and VTL 1967 Bullard 52" Dynatrol Good Yes 1967 Bullard 52" Dynatrol B6006 59,500.00 0 Yes 52" 58" 50 3/8" 250 50 Table Swing U/R RPM HP

7889 BORING MILLS, VERTICAL and VTL 1964 Bullard 36" Dynatrol Good Yes 36" 3-Jaw Chuck, 48" Swing, 30" Under Rail, 3008 RPM, 50 HP, 4-Pos. Turret Head, Power Rapid Traverse All Directions, Full Pendant Control, Hardened and Ground Ways 1964 Bullard 36" Dynatrol B6006 19,000.00 -1 Yes 36" 48" 30" 300 50 Table Swing U/R RPM HP

8064 BORING MILLS, VERTICAL and VTL 1942 Bullard 36" Spiral Drive Good Yes 1942 Bullard 36" Spiral Drive B6006 14,500.00 0 Yes 34" 39" 24" 200 30 Table Swing U/R RPM HP

8066 BORING MILLS, VERTICAL and VTL Bullard 36" Spiral Drive Good Yes Bullard 36" Spiral Drive B6006 10,500.00 0 Yes 34" 39" 24" 200 30 Table Swing U/R RPM HP

8103 BORING MILLS, VERTICAL and VTL 1962 Bullard 64" Cutmaster Good Yes 1962 Bullard 64" Cutmaster B6006 95,000.00 0 Yes 64" 72" 54" 100 50 Table Swing U/R RPM HP

9574 BORING MILLS, VERTICAL and VTL Cincinnati 84" Hypro Good 84" 4-Jaw Chuck, 89" Swing, 70" Under Rail, 70 RPM, 30 HP, Two (2) Swivel Type Ram Heads, Pendant Controls, Table Guarding, Power Rail Elevation, Anti-Friction Table Track, Coolant System, Floor Standing - No Pit Required Cincinnati 84" Hypro B6006 79,500.00 0 Yes 84" 89" 70" 70 30 Table Swing U/R RPM HP

8388 BORING MILLS, VERTICAL and VTL Cincinnati 92" Hypro Good No 92" 4-Jaw Chuck, 102" Swing, 64" Under Rail, 43 RPM, 40 HP, Two (2) Ram Head(s), One (1) Side Head, Pendant Controls, No Pit Required Cincinnati 92" Hypro B6006 79,500.00 0 Yes 92" 102" 64" 43 40 Table Swing U/R RPM HP

8443 BORING MILLS, VERTICAL and VTL 1977 Dorries 40" Very Good Yes 1977 Dorries 40" B6006 34,500.00 0 Yes 39.4" 51" 60" 355 30 Table Swing U/R RPM HP

8200 BORING MILLS, VERTICAL and VTL 1970 Froriep 6KE 260/610-120 Very Good No 1970 Froriep 6KE 260/610-120 B6006 ######## 0 Yes 102" 240" 53 38 75 Table Swing U/R RPM HP

9826 BORING MILLS, VERTICAL and VTL 1947 Giddings and Lewis 52" Hypro Good Yes 1947 Giddings and Lewis 52" Hypro B6006 52,500.00 0 Yes 52" 57" 46" 72 40 Table Swing U/R RPM HP

8114 BORING MILLS, VERTICAL and VTL 1954 Giddings and Lewis Model 61 Very Good Yes 1954 Giddings and Lewis Model 61 B6006 ######## 0 Yes 52" 54" 52" 300 30 Table Swing U/R RPM HP

9514 BORING MILLS, VERTICAL and VTL 1955 Giddings and Lewis 72" Hypro Good No 1955 Giddings and Lewis 72" Hypro B6006 ######## 0 Yes 72" 75 120 100 40 Table Swing U/R RPM HP

8198 BORING MILLS, VERTICAL and VTL 1955 King 42" Good Yes 1955 King 42" B6006 40,000.00 0 Yes 42" 54" 37" 200 30 Table Swing U/R RPM HP

8575 BORING MILLS, VERTICAL and VTL King 64" Good Yes King 64" B6006 45,000.00 0 Yes 64" 72" 57" 45. 50 Table Swing U/R RPM HP

8418 BORING MILLS, VERTICAL and VTL King 84" Good Yes King 84" B6006 65,000.00 0 Yes 84" 90" 70" 30 4 Table Swing U/R RPM HP

8106 BORING MILLS, VERTICAL and VTL 1950 King V-7 - 100" Fair Yes 1950 King V-7 - 100" B6006 99,900.00 0 Yes 100" 103" 82" 45.1 40 Table Swing U/R RPM HP

8285 BORING MILLS, VERTICAL and VTL 1948 King 62" Good Yes 62" Table, 72" Swing, 62" Under Rail, 103 RPM, 50 HP, Two Ram Head(s), One Side Head, 66" 4-Jaw Manual Chuck, Pendant Control 1948 King 62" B6006 45,000.00 -1 Yes 62" 72" 62" 103" 50 Table Swing U/R RPM HP

10090 BORING MILLS, VERTICAL and VTL King 62" Good Yes King 62" B6006 38,000.00 0 Yes 62" 72" 53 1/2" 44 40 Table Swing U/R RPM HP

8391 BORING MILLS, VERTICAL and VTL King 96" Very Good King 96" B6006 ######## 0 No 96" 103.5" 70" 60 50 Table Swing U/R RPM HP

8390 BORING MILLS, VERTICAL and VTL King 84" Very Good No King 84" B6006 99,500.00 0 Yes 84" 90" 70" 55 40 Table Swing U/R RPM HP

8201 BORING MILLS, VERTICAL and VTL Niles 144" Good Yes Niles 144" B6006 ######## 0 Yes 144" 157" 120 19 75 Table Swing U/R RPM HP

8975 BORING MILLS, VERTICAL and VTL 1971/1980 O-M Ltd. TMO-20 Good Yes 1971/1980 O-M Ltd. TMO-20 B6006 89,500.00 0 Yes 78" 90" 63" 80 40 Table Swing U/R RPM HP

9103 BORING MILLS, VERTICAL and VTL 1968 Pensotti KN-950 Very Good Yes 34" 4-Jaw Chuck, 36" Swing, 35.43" Under Rail, 200 RPM, 25 HP, Turret Head, Side Head, Threading, Power Rapids, Floor Mount 1968 Pensotti KN-950 B6006 22,500.00 -1 Yes 33.9" 36" 35.433" 200 25 Table Swing U/R RPM HP

9032 BORING MILLS, VERTICAL and VTL 1975 Rafamet KCF-400 Very Good Yes 1975 Rafamet KCF-400 B6006 ######## 0 Yes 145" 162" 120" 40 75 Table Swing U/R RPM HP

8277 BORING MILLS, VERTICAL and VTL 1976/95 Schiess KE-100 Very Good Yes 1976/95 Schiess KE-100 B6006 29,500.00 0 Yes 39" 45" 52" 310 25 Table Swing U/R RPM HP

7336 BORING MILLS, VERTICAL and VTL 1952 Schiess KE-125 Good Yes 1952 Schiess KE-125 B6006 49,500.00 0 Yes 49.2" 55.1" 52.6" 237 30 Table Swing U/R RPM HP

8100 BORING MILLS, VERTICAL and VTL 2008 Vulcan C5116A Excellent Yes 2008 Vulcan C5116A B6006 69,500.00 0 Yes 55.12" 63" 39.37" 160 40 Table Swing U/R RPM HP

10393 BORING MILLS, VERTICAL and VTL 19?? Webster and Bennett 36" Very Good Yes 19?? Webster and Bennett 36" B6006 -1 Yes 36" 42" 30" 200 15 Table Swing U/R RPM HP

8490 BORING MILLS, VERTICAL and VTL 1960 Webster and Bennett 48" Good Yes 1960 Webster and Bennett 48" B6006 18,500.00 0 Yes 48" 57" 32" 100 30 Table Swing U/R RPM HP

10392 BORING MILLS, VERTICAL and VTL 19?? Webster and Bennett 36" Very Good Yes 19?? Webster and Bennett 36" B6006 -1 Yes 36" 42" 30" 200 15 Table Swing U/R RPM HP

10391 BORING MILLS, VERTICAL and VTL 19?? Webster and Bennett 48" Very Good Yes 19?? Webster and Bennett 48" B6006 -1 Yes 48" 52" 44" 100 25 Table Swing U/R RPM HP

9024 BORING MILLS, VERTICAL and VTL Webster and Bennett 60" Good Yes Webster and Bennett 60" B6006 76,000.00 0 Yes 60" 64" 35" 83 30" Table Swing U/R RPM HP

9861 BORING MILLS, VERTICAL and VTL, CNC and NC 2008 Amera-Seiki VT-1000T Fanuc OiTC Like New Yes 2008 Amera-Seiki VT-1000T Fanuc OiTC B6200 ######## -1 Yes 39.4" 47.42" 27.5 1,200 50 Table Swing U/R RPM HP

10117 BORING MILLS, VERTICAL and VTL, CNC and NC 2010 Amera-Seiki VT-800 Fanuc OiTD New Yes 2010 Amera-Seiki VT-800 Fanuc OiTD B6200 ######## -1 Yes 24" 31.5" 31.5 2,000 60 Table Swing U/R RPM HP

9684 BORING MILLS, VERTICAL and VTL, CNC and NC 2008 Amera-Seiki VT-600 Fanuc OiTC Very Good Yes 2008 Amera-Seiki VT-600 Fanuc OiTC B6200 ######## -1 Yes 24" 29.43" 23.62" 2,000 40 Table Swing U/R RPM HP

10053 BORING MILLS, VERTICAL and VTL, CNC and NC Bullard 66" Dynatrol Fanuc OT Good Yes Bullard 66" Dynatrol Fanuc OT B6200 ######## 0 Yes 66" 79" 58" 160 100 Table Swing U/R RPM HP

8262 BORING MILLS, VERTICAL and VTL, CNC and NC 1986 Bullard 76" Dynatrol Allen Bradley 8200 Very Good Yes 1986 Bullard 76" Dynatrol Allen Bradley 8200 B6200 ######## 0 Yes 76" 88" 76" 210 100 Table Swing U/R RPM HP

10220 BORING MILLS, VERTICAL and VTL, CNC and NC Bullard 76" Dyn-Au-Tape Allen Bradley 8200 Good Yes Bullard 76" Dyn-Au-Tape Allen Bradley 8200 B6200 ######## 0 Yes 76" 88" 78" 186 75 Table Swing U/R RPM HP

9939 BORING MILLS, VERTICAL and VTL, CNC and NC 1968 Bullard 36" Dynatrol Fanuc OT Good Yes 36" 4-Jaw Manual Chuck, 39" Maximum Swing Side Head Up, 46" Maximum Swing Side Head Down, 30" Under Rail, 468 RPM, Turret Head, Side Head, Pendant Control, Power Indexing Turret Head, Power Indexing Turret Side Head, Variable Rapid Traverse 1968 Bullard 36" Dynatrol Fanuc OT B6200 58,000.00 -1 Yes 36" 46" 30" 500 50 Table Swing U/R RPM HP

8140 BORING MILLS, VERTICAL and VTL, CNC and NC 1968 Froriep 10KZ300 Allen Bradley 550 Good Yes 1968 Froriep 10KZ300 Allen Bradley 550 B6200 ######## 0 Yes 120" 132" 72" 56 70 Table Swing U/R RPM HP

10056 BORING MILLS, VERTICAL and VTL, CNC and NC Giddings and Lewis Series 70 Machine Mate Very Good Yes Giddings and Lewis Series 70 Machine Mate B6200 84,500.00 0 Yes 48" 60" 48" 2,000 50 Table Swing U/R RPM HP

10189 BORING MILLS, VERTICAL and VTL, CNC and NC 1978 Giddings and Lewis 48" Giddings & Lewis 800 Good Yes 1978 Giddings and Lewis 48" Giddings & Lewis 800 B6200 ######## 0 Yes 48" 60" 48" 333 40 Table Swing U/R RPM HP

8448 BORING MILLS, VERTICAL and VTL, CNC and NC 1971/2008 Giddings and Lewis 48" Fagor 8055 Excellent Yes 48" Table, 60" Swing, 60" Under Rail, 320 RPM, 50 HP, Turret Head, 180 IPM Rapids, Heidenhain Glass Scales on All Axis, Chip Enclosure Gaurds, New Bellows Covers, Re-Conditioned Ballscrews, All Ways Re-Ground and Fitted, Coolant System, Programmable Rail Head Elevation, Toolholders, CNC Controlled Turret Head With Heidenhain Rotary Encoder Feedback, Hydraulic Clamping on Rail Head 1971/2008 Giddings and Lewis 48" Fagor 8055 B6200 ######## -1 Yes 48" 64" 60" 320 50 Table Swing U/R RPM HP

9864 BORING MILLS, VERTICAL and VTL, CNC and NC 1968/1990 Giddings and Lewis 48" Fanuc OT Good Yes 1968/1990 Giddings and Lewis 48" Fanuc OT B6200 56,900.00 0 Yes 48" 60" 48" 400 75 Table Swing U/R RPM HP

8210 BORING MILLS, VERTICAL and VTL, CNC and NC 1982 Giddings and Lewis Model 512 Giddings & Lewis 800 Good Yes 1982 Giddings and Lewis Model 512 Giddings & Lewis 800 B6200 ######## 0 Yes 48" 60" 48" 400 75 Table Swing U/R RPM HP

8571 BORING MILLS, VERTICAL and VTL, CNC and NC Giddings and Lewis VTL-60 GE Mark Centruy 2000 Good Yes Giddings and Lewis VTL-60 GE Mark Centruy 2000 B6200 ######## 0 Yes 60" 72" 68" 272 125 Table Swing U/R RPM HP

5997 BORING MILLS, VERTICAL and VTL, CNC and NC 1986 Gray 48" Ringmaster Fanuc 15T Very Good No 1986 Gray 48" Ringmaster Fanuc 15T B6200 ######## 0 Yes 48" 61.75" 48" 290 50 Table Swing U/R RPM HP

8222 BORING MILLS, VERTICAL and VTL, CNC and NC 1980/08 Gray RM 66 Fanuc OiT Rebuilt Yes 66" Table, 72" Swing, 66" Under Rail, 272 RPM, 50 HP, Single Turret Head, 66" 4-Jaw Manual Chuck, Chip Conveyor, Full Enclosure, Heidenhain Scales, New Control, AC Servos, 50 HP AC Spindle Motor 1980/08 Gray RM 66 Fanuc OiT B6200 ######## -1 Yes 66" 72" 66" 272 50 Table Swing U/R RPM HP

9902 BORING MILLS, VERTICAL and VTL, CNC and NC 1953/1990 King 56" Centroid T 400 Very Good Yes 56" Table, 64" Swing, 42" UR, 100 RPM, 50 HP, 56" 4-Jaw Chuck, One Overhead Loading Winch, Set of Four (4) Table Jaws, Roll Around Control, Coolant System, Power Indexing Turret, Centroid T-400 Conversational Control Same As GE Fanuc 1953/1990 King 56" Centroid T 400 B6200 70,000.00 0 Yes 56" 62" 42" 100 50 Table Swing U/R RPM HP

8954 BORING MILLS, VERTICAL and VTL, CNC and NC 2009 New Century VTC 64 Fanuc OiTC Like New Yes 2009 New Century VTC 64 Fanuc OiTC B6200 ######## 0 Yes 64" 72" 52" 200 60 Table Swing U/R RPM HP

10528 BORING MILLS, VERTICAL and VTL, CNC and NC 1989 O-M Ltd. VT-5 20N Fanuc 15TF Good Yes 1989 O-M Ltd. VT-5 20N Fanuc 15TF B6200 ######## 0 Yes 78.74" 98.42" 80.75" 200 75 Table Swing U/R RPM HP

10269 BORING MILLS, VERTICAL and VTL, CNC and NC 1981 Rafamet KCH-250 GE 1050 Good Yes 1981 Rafamet KCH-250 GE 1050 B6200 ######## 0 Yes 98.43" 116" 110" 140 25 Table Swing U/R RPM HP

9862 BORING MILLS, VERTICAL and VTL, CNC W-ATC 2009 Amera-Seiki VT-1000 ATC Fanuc OiTC Like New Yes 2009 Amera-Seiki VT-1000 ATC Fanuc OiTC B6200A ######## -1 Yes 39.4" 47.42" 27.5 600 60 Table Swing U/R RPM HP

9863 BORING MILLS, VERTICAL and VTL, CNC W-ATC 2010 Amera-Seiki VT-1600 ATC Fanuc 18iTB New No 2010 Amera-Seiki VT-1600 ATC Fanuc 18iTB B6200A ######## -1 Yes 63" 78.74" 78.74" 256" 100 Table Swing U/R RPM HP

9810 BORING MILLS, VERTICAL and VTL, CNC W-ATC 2010 Amera-Seiki VT-1200 ATC Fanuc OiTD New Yes 2010 Amera-Seiki VT-1200 ATC Fanuc OiTD B6200A ######## -1 Yes 49.2" 63" 47.5" 312 60 Table Swing U/R RPM HP

10080 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1975 Berthiez TFM-200N Fanuc 21iT Very Good Yes 1975 Berthiez TFM-200N Fanuc 21iT B6200A ######## 0 Yes 81" 90" 69" 200 74 Table Swing U/R RPM HP

9824 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1996 Bullard 66" Fanuc 15T Good Yes 1996 Bullard 66" Fanuc 15T B6200A ######## 0 Yes 66" 79" 76" 278 100 Table Swing U/R RPM HP

10420 BORING MILLS, VERTICAL and VTL, CNC W-ATC 2002 Century 110" Fanuc 18iTA Very Good Yes 2002 Century 110" Fanuc 18iTA B6200A ######## 0 Yes 110" 126" 65" 65 60 Table Swing U/R RPM HP

10362 BORING MILLS, VERTICAL and VTL, CNC W-ATC 2003 Femco VL-12 Fanuc 18T Very Good Yes 2003 Femco VL-12 Fanuc 18T B6200A ######## 0 Yes 49.21" 62.99" 49.61" 280 60 Table Swing U/R RPM HP

10583 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1991 Giddings and Lewis Series 512 Giddings & Lewis 8000 Good Yes 1991 Giddings and Lewis Series 512 Giddings & Lewis 8000 B6200A ######## 0 Yes 48" 58" 42" 483 75 Table Swing U/R RPM HP

10266 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1991 Giddings and Lewis 42" Giddings & Lewis 8000 Good No 1991 Giddings and Lewis 42" Giddings & Lewis 8000 B6200A ######## 0 Yes 42" 48" 42" 480 60 Table Swing U/R RPM HP

10055 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1978/2005 Giddings and Lewis Series 512 Fanuc 21iT Good Yes 1978/2005 Giddings and Lewis Series 512 Fanuc 21iT B6200A ######## 0 Yes 48" 60" 48" 327 50 Table Swing U/R RPM HP

9821 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1985 Mazak A-12 Megaturn Mazatrol T-3 Good Yes 1985 Mazak A-12 Megaturn Mazatrol T-3 B6200A ######## 0 Yes 49.2" 57" 51" 350 45 Table Swing U/R RPM HP

8781 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1990 Mazak A-12 Megaturn Fanuc 15T Good Yes 1990 Mazak A-12 Megaturn Fanuc 15T B6200A ######## 0 Yes 49.2" 57" 51" 350 80 Table Swing U/R RPM HP

9054 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1997 Monarch VLN14 Fanuc 15TTA Very Good Yes 1997 Monarch VLN14 Fanuc 15TTA B6200A ######## 0 Yes 60" 67" 44" 235 50 Table Swing U/R RPM HP

10234 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1995 O-M Ltd. VT-5 16N Fanuc 15T Very Good Yes 1995 O-M Ltd. VT-5 16N Fanuc 15T B6200A ######## 0 Yes 66" 78" 78.75" 250 60 Table Swing U/R RPM HP

9421 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1985/1995 O-M Ltd. TDC-12N Fanuc 15T Very Good Yes 1985/1995 O-M Ltd. TDC-12N Fanuc 15T B6200A ######## 0 Yes 49.25" 63" 49 1/4" 350 50 Table Swing U/R RPM HP

8883 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1986 O-M Ltd. TDC-12N Fanuc 11T Very Good Yes 1986 O-M Ltd. TDC-12N Fanuc 11T B6200A ######## 0 Yes 49.25" 63" 39.37" 350 50 Table Swing U/R RPM HP

9298 BORING MILLS, VERTICAL and VTL, CNC W-ATC 2002 O-M Ltd. Omega 80 Fanuc 18iT Very Good Yes 2002 O-M Ltd. Omega 80 Fanuc 18iT B6200A ######## 0 Yes 63" 78.75" 63" 320 75 Table Swing U/R RPM HP

10546 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1981 Schiess 16DS-125 Fanuc 8T Good Yes 1981 Schiess 16DS-125 Fanuc 8T B6200A 99,500.00 0 Yes 49.21" 62.99" 49.21" 315 40 Table Swing U/R RPM HP

8339 BORING MILLS, VERTICAL and VTL, CNC W-ATC 2008 Takang VL-100CM Fanuc 18iT New No 2008 Takang VL-100CM Fanuc 18iT B6200A ######## 0 Yes 39.3" 47.2" 36.4" 40 30 Table Swing U/R RPM HP

10239 BORING MILLS, VERTICAL and VTL, CNC W-ATC 2008 Titan 57/65 Fanuc OiTC Excellent Yes 2008 Titan 57/65 Fanuc OiTC B6200A ######## 0 Yes 57.08" 65" 39.37" 250 60 Table Swing U/R RPM HP

10046 BORING MILLS, VERTICAL and VTL, CNC W-ATC 2007 Topper TVL-10DC Very Good Yes 2007 Topper TVL-10DC B6200A ######## 0 Yes 40" 47.2 25.5" 350 30 Table Swing U/R RPM HP

10423 BORING MILLS, VERTICAL and VTL, CNC W-ATC 2005 Toshiba TUE-20 Fanuc 18iT Good Yes 2005 Toshiba TUE-20 Fanuc 18iT B6200A 0 Yes 78.7" 90.5" 67.7" 200 60 Table Swing U/R RPM HP

10580 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1996 Toshiba TUD-20 Fanuc 15TA Very Good Yes 1996 Toshiba TUD-20 Fanuc 15TA B6200A ######## 0 Yes 78.74" 98.42" 81" 200 60 Table Swing U/R RPM HP

9417 BORING MILLS, VERTICAL and VTL, CNC W-ATC 2001 Toshiba TUE-15 Fanuc 18T Very Good Yes 2001 Toshiba TUE-15 Fanuc 18T B6200A ######## 0 Yes 59" 70.86" 67.75" 250 50 Table Swing U/R RPM HP

8342 BORING MILLS, VERTICAL and VTL, CNC W-ATC 2008 Toshiba TUE-20 Fanuc OiTC Like New Yes 2008 Toshiba TUE-20 Fanuc OiTC B6200A ######## 0 Yes 78.7" 90.5" 67.7" 200 60 Table Swing U/R RPM HP

8385 BORING MILLS, VERTICAL and VTL, CNC W-ATC 1982/2009 Toshiba TMC-16A Fanuc 18T Rebuilt Yes 1982/2009 Toshiba TMC-16A Fanuc 18T B6200A ######## 0 Yes 71" 78.7" 63" 250 73" Table Swing U/R RPM HP

10422 BORING MILLS, VERTICAL and VTL, CNC W-MILLING and ATC 1996 Toshiba TMD-16 2-APC Fanuc 15TC Good Yes 1996 Toshiba TMD-16 2-APC Fanuc 15TC B6175A ######## 0 Yes 63" 78.7" 61" 280 60 Table Swing U/R RPM HP

7100 BRAKES, PRESS, HYDRAULIC 1985 Pacific 100-10 Good Yes 1985 Pacific 100-10 B7015 24,000.00 -1 Yes 100 10' 7.5" 10" 15 Ton Bed Stoke Throat HP

7099 BRAKES, PRESS, HYDRAULIC 1966 Pacific 200-10 Good Yes 200 Tons, 10' Bed, 8' 4" Between Housings, 7.5" Stroke, 25 HP, Hurco AutoBend 5 Back Gauge 1966 Pacific 200-10 B7015 29,900.00 -1 Yes 200 10' 7.5" 10" 25 Ton Bed Stoke Throat HP

8384 BRAKES, PRESS, HYDRAULIC 1974 Promecam RG-75-35 Good Yes 80 Tons, 122' Bed, 105" Between housings, 4" Stroke, 12" Open Height, 136 IPM Approach, 65 IPM Working, 127 IPM Return, 7.5 HP, Variable Stroke Adjustment, Adjustable Punch Holders, Full Length Treadle 1974 Promecam RG-75-35 B7015 11,500.00 0 Yes 80 122' 4" 16" 7.5 Ton Bed Stoke Throat HP

8454 BRAKES, PRESS, HYDRAULIC 1981 Promecam RG-65-25 Good Yes 120 Tons, 1/4" Mild Steel Capacity, 8' Bed, 90" Between housings, 8" Stroke, 15" Open Height, 136 IPM Approach, 65 IPM Working, 127 IPM Return, 25 HP, Manual Back Operated Back Gauge, Upper & Lower Die Holders, Overload Protection, Flush Mount Frame, Bed Tilt For Off-Set Bending, Off / Set/ Jog / Run / Single Modes, Large Selection of Tooling 1981 Promecam RG-65-25 B7015 10,500.00 0 Yes 65 8' 8" 16" 10 Ton Bed Stoke Throat HP

9134 BRAKES, PRESS, HYDRAULIC 1996 Wysong PH-6096 Wysong GC 6000 Very Good Yes 60 Tons, 1/4" Mild Steel Capacity, 8' Bed, 104" Between housings, 6" Stroke, 15" Open Height, 300 IPM Approach, 22 IPM Working, 225 IPM Return, 15 HP, 24" Two (2) Axis CNC Back Gauge, Operator Control Pedestal, Flush Mount Frame 1996 Wysong PH-6096 Wysong GC 6000 B7015 16,500.00 -1 Yes 60 96" 6" 10" 15 Ton Bed Stoke Throat HP

8449 BRAKES, PRESS, MECHANICAL 1978 Chicago Model 68-B Good Yes 1978 Chicago Model 68-B B7020 14,000.00 -1 Yes 55 8' 3" 8" 3 Ton Bed Stoke Throat HP

8433 BRAKES, PRESS, MECHANICAL 1956 Dreis and Krump 5510D Good Yes 1956 Dreis and Krump 5510D B7020 16,500.00 0 Yes 200 12' 6" 4" 8" 20 Ton Bed Stoke Throat HP

8626 BRAKES, PRESS, MECHANICAL Milwaukee 3045-5 Good Yes Milwaukee 3045-5 B7020 7,500.00 -1 Yes 40 6' 3" 8" Ton Bed Stoke Throat HP

8365 BROACHES, HORIZONTAL SURFACE 1985 US Broach 4T-36VHP 1985 US Broach 4T-36VHP B7870 0 4 36" 30 Ton Bed Stoke Throat HP

8900 COMPARATORS Jones and Lamson FC-14 Very Good Yes Jones and Lamson FC-14 C3806 7,500.00 -1 Yes Free Standing 14" 8" x 6" 30" x 6" .0005 Style Screen Range Stage Reolution

9028 COMPARATORS Optical Gaging Products Model Q30S Very Good Yes Optical Gaging Products Model Q30S C3806 14,900.00 0 Yes Free Standing 30" 12" x 10" x 3" 32" x 8" .0005 Style Screen Range Stage Reolution

9115 COMPARATORS 1990 Optical Gaging Products QL-30 Refurbished Yes 1990 Optical Gaging Products QL-30 C3806 19,900.00 0 Yes Free Standing 30" 12" x 6" 27" x 6 1/2" .0005 Style Screen Range Stage Reolution

8305 COOLANT FILTERING SYSTEMS 2005 Knoll SF 2000/F60-4 Excellent Yes 2005 Knoll SF 2000/F60-4 C5761 -1 Yes 360 Liters Per Min Flow Rate Max PSI Filtration HP

8304 COOLANT FILTERING SYSTEMS 2006 Knoll VRF 450/550 Excellent Yes 2006 Knoll VRF 450/550 C5761 -1 Yes 450 Liters per Min Flow Rate Max PSI Filtration HP

8907 COOLANT FILTERING SYSTEMS 2004 Transor FWC-110-TRP Very Good Yes 2004 Transor FWC-110-TRP C5761 48,000.00 -1 Yes 1 1 Milcron Flow Rate Max PSI Filtration HP

9958 COOLANT PUMP SYSTEM 2002 ChipBlaster 1513V Good No 2002 ChipBlaster 1513V C5760 2,800.00 -1 Yes 1,500 PSI 13 GPM 55 Gallons 10 Max. Presuure Max. CFM Tank Capacity HP

8327 COORDINATE MEASURING MACHINES 1997 Brown and Sharpe Micro-Xcel PFX 4-5-4 DCC Very Good Yes 22" x 30" x 17" Table, 18" x 20" x 16" Travels, Computer With MM4 Software, Digitizing and Scanning Capabilities, B & S Controller, Computer, Joystick Control 1997 Brown and Sharpe Micro-Xcel PFX 4-5-4 DCC C5901 18,000.00 -1 Yes Gantry 18" x 20" x 16" 22" x 30" x 17" 500 lbs Style Travels Work Area Work Load

8765 COORDINATE MEASURING MACHINES 1986 Brown and Sharpe Validator Good Yes 1986 Brown and Sharpe Validator C5901 -1 Yes Gantry 24" x 24" x 10" 26" x 24" x 29" 1,500 lbs Style Travels Work Area Work Load

8372 COORDINATE MEASURING MACHINES 1989 Brown and Sharpe Xcel 7-10-7 Very Good Yes 1989 Brown and Sharpe Xcel 7-10-7 C5901 26,000.00 -1 Yes Gantry 26" x 40" x 26" 26" x 42" x 111" 1,500 lbs Style Travels Work Area Work Load

10387 COORDINATE MEASURING MACHINES 1985 Numerex 2428-18 Very Good Yes 1985 Numerex 2428-18 C5901 10,500.00 -1 Yes Gantry 27.559" x 23.622" x 16" 36" x 25" x 10" 450 lbs Style Travels Work Area Work Load

8184 COORDINATE MEASURING MACHINES 2000 Optical Gaging Products Smartscope Avant ZIP 300 Very Good Yes 2000 Optical Gaging Products Smartscope Avant ZIP 300 C5901 45,000.00 0 Yes Bench 12" x 12" x 8" 14" x 12" 85 lbs Style Travels Work Area Work Load

8183 COORDINATE MEASURING MACHINES 1996 Optical Gaging Products Smartscope 200 MVP Very Good Yes 1996 Optical Gaging Products Smartscope 200 MVP C5901 14,000.00 0 Yes Bench 8" x 6" x 6" 10" x 8" 55 lbs Style Travels Work Area Work Load

8185 COORDINATE MEASURING MACHINES Optical Gaging Products Smartscope 200 MVP Very Good Yes Optical Gaging Products Smartscope 200 MVP C5901 23,000.00 0 Yes Bench 8" x 6" x 6" 10" x 8" 55 lbs Style Travels Work Area Work Load

8174 COORDINATE MEASURING MACHINES 1999 Renishaw Cyclone Digitizer Very Good Yes 26" x 25" x 18" Table, 23.6" x 19.7" x 15.7" Travels, Computer With Software, Extra Fixtures, Full Digitizing Capabilities 1999 Renishaw Cyclone Digitizer C5901 21,000.00 -1 Yes Gantry 23.6" x 19.7" x 15.7" 26" x 25" x 18" 440 lbs Style Travels Work Area Work Load

9772 COORDINATE MEASURING MACHINES 2007 Sheffield Discovery II D-8 Good No 2007 Sheffield Discovery II D-8 C5901 32,500.00 0 No Gantry 20" x 24" x 16" 250 lbs Style Travels Work Area Work Load

10118 DRILLING and TAPPING MACHINES CNC 1996 Amera-Seiki DTM-40 Mitsubishi 520M Good Yes 1996 Amera-Seiki DTM-40 Mitsubishi 520M D3797 9,800.00 -1 Yes 23.5" x 13.75" 20" x 13.75" x 18" 6,000 10 10 Table Travels RPM HP ATC

8684 DRILLING and TAPPING MACHINES CNC 2007 Ares Seiki R-560-14 Mitsubishi 64SM Very Good Yes 2007 Ares Seiki R-560-14 Mitsubishi 64SM D3797 61,000.00 0 Yes 25.6" x 16.1" 22" x 15.7" x 11.8" 12,000 10 14 Table Travels RPM HP ATC

9058 DRILLING and TAPPING MACHINES CNC 2006 Bridgeport DT-480-DT-APC Fanuc OiMC Very Good Yes 2006 Bridgeport DT-480-DT-APC Fanuc OiMC D3797 35,500.00 0 Yes 33.1" x 19.7" 18.89" x 12.6" x 16.9" 15,000 6 10 Table Travels RPM HP ATC

10303 DRILLING and TAPPING MACHINES CNC 1995 Brother TC-323 Brother CNC 730 Good Yes 33.1" x 19.7" Table, 16.5" x 12.6" x 10.2" Travels, 10,000 RPM, 30 Taper, 6 HP, 10 ATC, Quick Table Two Surface Pallet Changer 1995 Brother TC-323 Brother CNC 730 D3797 17,000.00 -1 Yes 33.1" x 19.7" 16.54" x 11.81" x 9.84" 10,000 4.6 10 Table Travels RPM HP ATC

9981 DRILLING and TAPPING MACHINES CNC 1994 Brother TC-221 Brother CNC 400 Good Yes 1994 Brother TC-221 Brother CNC 400 D3797 15,000.00 -1 Yes 23.6" x 11.8" 16.5" x 11.8" x 9.8" 6,000 2 10 Table Travels RPM HP ATC

10293 DRILLING and TAPPING MACHINES CNC 2001 Brother TC-22A Brother CNC AOO Very Good Yes 2001 Brother TC-22A Brother CNC AOO D3797 39,500.00 0 Yes 25.59" x 15.7" 19.68" x 15.7" x 16" 12,000 9.6 26 Table Travels RPM HP ATC

10304 DRILLING and TAPPING MACHINES CNC 1995 Brother TC-323 Brother CNC 730 Good Yes 1995 Brother TC-323 Brother CNC 730 D3797 18,500.00 -1 Yes 33.1" x 19.7" 16.54" x 11.81" x 9.84" 10,000 4.6 10 Table Travels RPM HP ATC

9840 DRILLING and TAPPING MACHINES CNC 2003 Brother TC-S2A-0 Brother CNC AOO Very Good Yes 2003 Brother TC-S2A-0 Brother CNC AOO D3797 44,500.00 0 Yes 31.5" x 12.6" 27.6" x 14.2" x 10.6" 10,000 8.4 14 Table Travels RPM HP ATC

9850 DRILLING and TAPPING MACHINES CNC 2003 Brother TC-22A-0 Brother CNC AOO Very Good Yes 2003 Brother TC-22A-0 Brother CNC AOO D3797 60,000.00 0 Yes 31.5" x 15.7" 27.5" x 15.7" x 16" 12,000 9.6 26 Table Travels RPM HP ATC

8642 DRILLING and TAPPING MACHINES CNC 1998 Brother TC-324 Brother CNC 630 Good Yes 1998 Brother TC-324 Brother CNC 630 D3797 29,500.00 0 Yes 33.1" x 19.7" 16.5" x 11.8" x 9.8" 10,000 6 10 Table Travels RPM HP ATC

9841 DRILLING and TAPPING MACHINES CNC 2003 Brother TC-S2B-0 Brother CNC AOO Very Good Yes 2003 Brother TC-S2B-0 Brother CNC AOO D3797 42,500.00 0 Yes 31.5" x 12.6" 27.5" x 14.17" x 12.6" 10,000 13 21 Table Travels RPM HP ATC

9901 DRILLING and TAPPING MACHINES CNC 2006 Brother TC-S2C Brother CNC AOO Very Good Yes 2006 Brother TC-S2C Brother CNC AOO D3797 59,900.00 0 Yes 31.5" x 12.6" 27.6" x 15.7" x 11.8" 10,000 13 14 Table Travels RPM HP ATC

10285 DRILLING and TAPPING MACHINES CNC 1995 Enshu DTCL APC Fanuc OM Good Yes 1995 Enshu DTCL APC Fanuc OM D3797 19,500.00 -1 Yes 23" x 11 3/4" 19.7" x 15.7" x 11.8" 10,000 7.4 16 Table Travels RPM HP ATC

9483 DRILLING and TAPPING MACHINES CNC 2008 Fanuc Robodrill A-T14iD Fanuc 31iA5 Excellent Yes 2008 Fanuc Robodrill A-T14iD Fanuc 31iA5 D3797 ######## 0 Yes 25.6" x 16" 19.68" x 15.75" x 12.99" 24,000 7.5 14 Table Travels RPM HP ATC

10267 DRILLING and TAPPING MACHINES CNC 2009 Fanuc Robodrill A-T21iFL Fanuc 31iA5 Very Good Yes 2009 Fanuc Robodrill A-T21iFL Fanuc 31iA5 D3797 96,500.00 0 Yes 33.46" x 16.14" 27" x 15.75" x 12.99" 10,000 14 21 Table Travels RPM HP ATC

10480 DRILLING and TAPPING MACHINES CNC 2000 Fanuc Robodrill A-T14iBL APC Fanuc 16iMA Very Good Yes 2000 Fanuc Robodrill A-T14iBL APC Fanuc 16iMA D3797 54,500.00 0 Yes 27.56" x 15.35" 27.56" x 15.75" x 13" 15,000 7.5 14 Table Travels RPM HP ATC

10481 DRILLING and TAPPING MACHINES CNC 2007 Fanuc Robodrill A-T14iE Fanuc 31iA5 Very Good Yes 33.46" x 16.14" Table, 27.56" x 15.75" x 12.99" Travels, 10,000 RPM, 30 Taper, 7.5 HP, 21 ATC, DDR Rotary Table, Rigid Tapping 2007 Fanuc Robodrill A-T14iE Fanuc 31iA5 D3797 ######## 0 Yes 25.6" x 15.74" 19.68" x 15.74" x 12.99" 10,000 7.5 14 Table Travels RPM HP ATC

9552 DRILLING and TAPPING MACHINES CNC 2000 Fanuc Robodrill A-T14iA APC Fanuc 16iM Very Good Yes 2000 Fanuc Robodrill A-T14iA APC Fanuc 16iM D3797 46,500.00 0 Yes 19.5" x 14.9" 19.7" x 14.98" x 11.8" 15,000 10.3 14 Table Travels RPM HP ATC

10564 DRILLING and TAPPING MACHINES CNC 2001 Fanuc Robodrill A-T14iB Fanuc16iM Very Good Yes 2001 Fanuc Robodrill A-T14iB Fanuc16iM D3797 49,500.00 0 Yes 25.6" x 15.74" 19.68" x 15.75" x 12.99" 15,000 7.5 14 Table Travels RPM HP ATC

10479 DRILLING and TAPPING MACHINES CNC 2005 Haas MDC-500 Haas 32 BIT Very Good Yes 2005 Haas MDC-500 Haas 32 BIT D3797 57,500.00 0 Yes 20" x 12.75" 20" x 14" x 20" 7,500 20 24 Table Travels RPM HP ATC

8435 DRILLING and TAPPING MACHINES CNC 1999 Hyundai SPT-V30TD Yasnac J-50M Very Good Yes Tables - 23.62" x 17.7, Travels - 19.68" x 11.81" x 11.81", 8,000 RPM, 7.5 HP, 14 ATC, Spindle Taper Air Blow, EIA / ISO, RS-232 Port Programming, Splash Guard 1999 Hyundai SPT-V30TD Yasnac J-50M D3797 26,500.00 -1 Yes 23.62" x 17.7" 19.68" x 11.81" x 11.81" 8,000 7.5 14 Table Travels RPM HP ATC

8739 DRILLS, GUN 1989 Techni-Drill BTA Good Yes 1989 Techni-Drill BTA D4554 27,500.00 0 Yes 1" 18" 10 2 Max. Cap. Stoke RPM HP Spindles

9887 DRILLS, H.D. and SENSITIVE, MULTI SPINDLE Natco F3B Good No Natco F3B D4803 -1 Yes 1 2,030 10 16 Max. Cap. Stoke RPM HP Spindles

9869 DRILLS, H.D. and SENSITIVE, MULTI SPINDLE 1981 Natco Good No 1981 Natco D4803 -1 Yes 1 25 16 Max. Cap. Stoke RPM HP Spindles

10182 DRILLS, HEAVY DUTY and SENSITIVE, SGL. VERT. SPDL. 1967 Giddings and Lewis Model 28 Good Yes 1967 Giddings and Lewis Model 28 D4810 6,800.00 -1 Yes 14" 1,200 10 1 Max. Cap. Stoke RPM HP Spindles

10394 DRILLS, RADIAL 19?? Carlton 5' x 17" Very Good Yes 19?? Carlton 5' x 17" D5700 -1 Yes 5' 17" 65" x 50" 1,000 15 Arm Column Table RPM HP

9269 DRILLS, RADIAL 1954 Carlton 4A Very Good Yes 6' Arm, 19" Column, 72" Under Spindle, 15 HP, 1,500 RPM, Power Clamping, Power Elevation, Box Table 1954 Carlton 4A D5700 8,000.00 -1 Yes 6' 19" 83" x 50" 1,500 15 Arm Column Table RPM HP

7552 DRILLS, RADIAL 1980 Cegielski (Polamco) GRV-554 Very Good Yes 8' Arm, 18" Column, 68.9" Under Spindle, 20 HP, 1,600 RPM, Drilling Capacity Mild Steel 2.5", Drilling Capacity Mild Cast 3.1", Box Table, Power Clamping, Power Elevation 1980 Cegielski (Polamco) GRV-554 D5700 23,000.00 -1 Yes 8' 18" 94" x 50" 1,600 20 Arm Column Table RPM HP

9027 DRILLS, RADIAL 1969 Giddings and Lewis Chipmaster Good Yes 1969 Giddings and Lewis Chipmaster D5700 14,500.00 0 Yes 63 3/4" 16" 71" x 42" 1,750 15 Arm Column Table RPM HP

9938 DRILLS, RADIAL 1962 Giddings and Lewis 6' x 15" Very Good Yes 15" Column, 6' Arm, 25 HP, # 6 Taper, Power Clamping to Arm and Head, Power Elevation of Arm, Power Rapid Head Traverse, Box Table 1962 Giddings and Lewis 6' x 15" D5700 10,000.00 -1 Yes 6' 17" 83" x 50" 1,500 25 Arm Column Table RPM HP

9026 DRILLS, RADIAL 1978 Ooya RE3-1600 Good Yes 1978 Ooya RE3-1600 D5700 17,500.00 0 Yes 63 3/4" 16" 83" x 45" 2,180 10 Arm Column Table RPM HP

10337 EDM - RAM, CNC 1999 Agie Mondo 2 Agie Futura IV Very Good Yes 1999 Agie Mondo 2 Agie Futura IV E2425 15,000.00 0 Yes 11.81" x 15.75" 11.8" x 15" x 12" 28" x 21" x 14" 40 Amp Table Travel Tank Power ATC

9382 EDM - RAM, CNC 1991 Charmilles Roboform 20 Charmilles Good Yes 15.62" x 11.8" Table, 11.81" x 9.8" x 9.8" Travels, 16 ATC, 32 Amps, 3-R Tooling, RS-232 Port, Transformer, Rustlick EDM Fluid, New Filters, 10,583 Cutting Hours 1991 Charmilles Roboform 20 Charmilles E2425 11,500.00 -1 Yes 15.62" x 11.8" 11.81" x 9.8" x 9.8" 29.1" x 20.5" x 13.6" 32 Amp 16 Table Travel Tank Power ATC

9767 EDM - RAM, CNC 1998 Hansvedt MS- 4 3050 Foreman Very Good Yes 1998 Hansvedt MS- 4 3050 Foreman E2425 16,000.00 -1 Yes 15" x 9" 12" x 7" x 8" 24" x 11" x 16" 30 / 50 Amp 6 Table Travel Tank Power ATC

8625 EDM - RAM, CNC 1993 Mitsubishi M-25-J Mitsubishi Control Very Good Yes 19.6" x 13.7" Table, 9.8" x 7.8" x 9.8" Travels, 29.53" x 13" x 20" Maximum Workpiece, 55 Amp, System 3-R Tooling, 1 Meg of Memory, 14" Color CRT, Programmable C-Axis, Fire Extinguisher, Filtration Unit, 3.5" Floppy Drive 1993 Mitsubishi M-25-J Mitsubishi Control E2425 25,000.00 -1 Yes 19.6" x 13.7" 9.8" x 7.8" x 9.8' 32" x 14" x 23" 55 Amp Table Travel Tank Power ATC

9429 EDM - RAM, CNC 1993 Mitsubishi M-25-J Mitsubishi Control Very Yes 19.6" x 13.7" Table, 9.8" x 7.8" x 9.8" Travels, 29.53" x 13" x 20" Maximum Workpiece, 35 Amp, System 3-R Tooling, 14" Color CRT, Programmable C-Axis, Fire Extinguisher, Transformer, Flexible Automatic Programming (FAP) 1993 Mitsubishi M-25-J Mitsubishi Control E2425 28,000.00 -1 Yes 19.6" x 13.7" 9.8" x 7.8" x 9.8" 32" x 14" x 23" 35 Amp Table Travel Tank Power ATC

8512 EDM - RAM, CNC 1997 Pacific PC-50 EX Good Yes 1997 Pacific PC-50 EX E2425 16,500.00 0 Yes 19" x 10" 10" x 6" x 6" 26" x 16" x 11" 55 Amp 16 Table Travel Tank Power ATC

10457 EDM - RAM, CNC 2006 Sodick AQ-55L Sodick Like New Yes 2006 Sodick AQ-55L Sodick E2425 82,000.00 0 Yes 30" x 22" 22" x 16" x 13.7" 37” x 16” x 29” 40 Amp 6 Table Travel Tank Power ATC

9188 LATHES, CNC, 2-AXIS, UNIVERSAL 1980 Mori-Seiki SL-6 Fanuc 6T Good Yes 1980 Mori-Seiki SL-6 Fanuc 6T L2150 29,000.00 0 Yes 35" 13.77" x 33.86" 1,800 3.5" 12 Swing Travels RPM Bar Cap. Stations

9017 LATHES, CNC, 2-AXIS, UNIVERSAL 2004 Mori-Seiki CL-2000 BT Mori-Seiki MSG-805 Very Good Yes 2004 Mori-Seiki CL-2000 BT Mori-Seiki MSG-805 L2150 62,000.00 0 Yes 20.1" 9.6" x 24" 3,500 2.5" 10 Swing Travels RPM Bar Cap. Stations

9691 LATHES, CNC, 2-AXIS, UNIVERSAL 1996 Mori-Seiki SL-75B Fanuc 18T Very Good Yes 1996 Mori-Seiki SL-75B Fanuc 18T L2150 ######## 0 Yes 35.8" 15.75" x 61" 1,010 5.6" 12 Swing Travels RPM Bar Cap. Stations

9682 LATHES, CNC, 2-AXIS, UNIVERSAL 1981 Mori-Seiki LL-7B 2500 Fanuc OT Good Yes 1981 Mori-Seiki LL-7B 2500 Fanuc OT L2150 84,500.00 0 Yes 42.9" 26.5" x 98" 1,150 4.1" 8 Swing Travels RPM Bar Cap. Stations

9681 LATHES, CNC, 2-AXIS, UNIVERSAL 1986 Mori-Seiki LL-8B 1500 Fanuc 11T Very Good Yes 1986 Mori-Seiki LL-8B 1500 Fanuc 11T L2150 ######## 0 Yes 54" 28.1" x 64" 550 14.5" 8 Swing Travels RPM Bar Cap. Stations

9613 LATHES, CNC, 2-AXIS, UNIVERSAL 2002 Mori-Seiki CL-2000 B Mori-Seiki MSG-805 Very Good Yes 2002 Mori-Seiki CL-2000 B Mori-Seiki MSG-805 L2150 49,500.00 0 Yes 20.1" 9.6" x 14.6" 3,500 2.5" 10 Swing Travels RPM Bar Cap. Stations

10566 LATHES, CNC, 2-AXIS, UNIVERSAL 2007 Okuma ES-L8 II OSP-U10L Very Good Yes Swing 21.65", Swing Over C.S. 20.47", Maximum Turning Diameter 12.20", Length 19.68", 3,500 RPM, 20 HP, 12 Sta. Turret, 10" 3-Jaw Hydraulic Chuck, Chip Conveyor, Some Turret Tooling, S30 Collet Chuck, Part Catcher, Hydraulic Tailstock, One Touch IGF 2007 Okuma ES-L8 II OSP-U10L L2150 62,000.00 0 Yes 21.65" 8.10" x 20.47" 3,000 2.75" 12 Swing Travels RPM Bar Cap. Stations

10019 LATHES, CNC, 2-AXIS, UNIVERSAL 1993 Okuma Cadet LNC-8 OSP-5020L Good Yes 1993 Okuma Cadet LNC-8 OSP-5020L L2150 18,500.00 0 Yes 15.75" 6.87" x 20.47" 4,200 1.77" 12 Swing Travels RPM Bar Cap. Stations

10559 LATHES, CNC, 2-AXIS, UNIVERSAL 1982 Okuma LC-30 1SC / 1000 OSP-3000L Good Yes 19.69" Swing, 16.14 SOC, 17.72 Max. Dia., 38.58 Length, 2.5" Bar Cap., 30 HP, 12 Sta. Turret, Tailstock, 12" 3-Jaw Chuck, Miscellaneous Tool Holders, Chip Conveyor, Coolant System, RS-232 Port 1982 Okuma LC-30 1SC / 1000 OSP-3000L L2150 8,000.00 -1 Yes 19.69" 11.42" x 40.16" 3,000 2.5 12 Swing Travels RPM Bar Cap. Stations

8261 LATHES, CNC, 2-AXIS, UNIVERSAL 1989 Okuma LC-30 1SC / 1000 OSP-5000LG Fair Yes 1989 Okuma LC-30 1SC / 1000 OSP-5000LG L2150 22,500.00 -1 Yes 19.69" 11.42" x 40.16" 3,000 2.5" 12 Swing Travels RPM Bar Cap. Stations

10560 LATHES, CNC, 2-AXIS, UNIVERSAL 1988 Okuma LC-40 1SC / 750 OSP-5000L Good Yes 1988 Okuma LC-40 1SC / 750 OSP-5000L L2150 18,000.00 -1 Yes 23.62" 11.22" x 28.74" 2,500 3" 12 Swing Travels RPM Bar Cap. Stations

10622 LATHES, CNC, 2-AXIS, UNIVERSAL 2000 Okuma Crown L-1060 SB OSP-700L Very Good Yes 2000 Okuma Crown L-1060 SB OSP-700L L2150 39,900.00 0 Yes 21.65" 7.28" x 20.47" 4,200 2.2 12 Swing Travels RPM Bar Cap. Stations

7362 LATHES, CNC, 2-AXIS, UNIVERSAL 2000 Okuma Crown L-1420 / 650 BB OSP-U10L Good Yes 24.41 Swing, 18.90" S.O.C. , 14.17" Turning Dia., 27" Centers, 2,800 RPM, 30 HP, 4.72 Spindle Bore, 12 Sta. Turret, 15" 3-Jaw Kitagawa Hydraulic Chuck, Tow Along Tailstock, IGF, Lap 4, Auto Chamfering, MAC Man, Nose Radius 2B 2000 Okuma Crown L-1420 / 650 BB OSP-U10L L2150 59,900.00 -1 Yes 24.41" 9.05" x 26.38" 2,800 3.62" 12 Swing Travels RPM Bar Cap. Stations

10365 LATHES, CNC, 2-AXIS, UNIVERSAL 1995 Okuma Crown L-1420 / 650 BB OSP-5020L Very Good Yes 1995 Okuma Crown L-1420 / 650 BB OSP-5020L L2150 34,500.00 0 Yes 24.41" 9.05" x 26.38" 2,800 3.62" 12 Swing Travels RPM Bar Cap. Stations

10400 LATHES, CNC, 2-AXIS, UNIVERSAL 2002 Okuma ES-L10 III OSP-U10L Good Yes Swing 21.65", Swing Over Cross Slide 20.47", Maximum Turning Diameter 12.20", Length 19.68", 3,000 RPM, 15 HP, 12 Sta. Turret, Tailstock, 10" 3-Jaw Chuck, Chip Conveyor 2002 Okuma ES-L10 III OSP-U10L L2150 42,500.00 0 Yes 21.65" 8.10" x 20.47" 3,800 2.75" 12 Swing Travels RPM Bar Cap. Stations

10160 LATHES, CNC, 2-AXIS, UNIVERSAL 1997 Okuma Crown 762 BB OSP-700L Very Good Yes 1997 Okuma Crown 762 BB OSP-700L L2150 39,500.00 0 Yes 21.65" 7.28" x 20.47" 3,500 2.75" 12 Swing Travels RPM Bar Cap. Stations

10593 LATHES, CNC, 2-AXIS, UNIVERSAL 2001 Okuma LB-45 II-3000 OSP-7000L Very Good Yes 2001 Okuma LB-45 II-3000 OSP-7000L L2150 ######## 0 Yes 33.7" 17.32" x 81.1" 2,800 3.75" 12 Swing Travels RPM Bar Cap. Stations

10161 LATHES, CNC, 2-AXIS, UNIVERSAL 1999 Okuma Crown 762 BB OSP-U10L Good Yes 1999 Okuma Crown 762 BB OSP-U10L L2150 24,500.00 0 Yes 21.65" 7.28" x 20.47" 3,500 2.75" 12 Swing Travels RPM Bar Cap. Stations

10595 LATHES, CNC, 2-AXIS, UNIVERSAL 1993 Okuma LB-15 OSP-5020L Good Yes 1993 Okuma LB-15 OSP-5020L L2150 16,500.00 0 Yes 15.75" 6.89" x 20.47" 4,200 1.75" 12 Swing Travels RPM Bar Cap. Stations

9935 LATHES, CNC, 2-AXIS, UNIVERSAL 1984 Okuma LH-50NBD 2000 OSP-3000L Very Good Yes 1984 Okuma LH-50NBD 2000 OSP-3000L L2150 26,500.00 0 Yes 36.02" 16" x 59" 1,000 6.89" 8 / 8 Swing Travels RPM Bar Cap. Stations

9355 EDM - RAM, CNC 1986 Sodick A3C Sodick Mark VII Good Yes 1986 Sodick A3C Sodick Mark VII E2425 4,500.00 -1 Yes 30" x 20" 12" x 8" x 10" 36" x 16" x 22" 40 Amp Table Travel Tank Power ATC

9749 EDM - WIRE, CNC 1991 Agie Agitron 50 Agiematic D Yes 1991 Agie Agitron 50 Agiematic D E2475 -1 On Way 21 1/2" x 17 1/2" 23" x 19" x 10" 317 Gallons 30 Amp Table Travel Tank Power

10241 EDM - WIRE, CNC 2001 Agie Classic 2 Agievision 2 Excellent Yes Maximum Workpiece Size - 29.5" x 21.6" x 9.8", Travels - 13.8" x 9.8" x 10.1" x 2.8" x 2.8", AWT, Dial Arm and Indicator, Affinity Chiller, Manual Pulse Generator, Full Five Axis Control, High Speed Super Surface (HSSC) Generator, Wire Extraction and Chopping System, Alignment Device 2001 Agie Classic 2 Agievision 2 E2475 62,500.00 -1 Yes 31" x 22" 13.7795" x 9.8425" x 10.07872" 34" x 24" x 12" Table Travel Tank Power

9508 EDM - WIRE, CNC 2002 Charmilles Robofil 690 Charmilles Very Good Yes 2002 Charmilles Robofil 690 Charmilles E2475 85,900.00 0 Yes 48.3" x 36.4" 31.5" x 23.6" x 15.75" 317 Gallons 50 Amp Table Travel Tank Power

7035 EDM - WIRE, CNC 2001 Charmilles Robofil 240 Charmilles Very Good Yes 2001 Charmilles Robofil 240 Charmilles E2475 62,000.00 -1 Yes 26.77" x 17.72" 13.77" x 8.66" x 8.66" 201 Gallons 40 Amp Table Travel Tank Power

10504 EDM - WIRE, CNC 1990 Leblond-Makino Model EE3 Good Yes 1990 Leblond-Makino Model EE3 E2475 10,500.00 -1 Yes 19.5" x 14.5" 14.2" x 9.8" x 9" 64 Table Travel Tank Power

10175 EDM - WIRE, CNC 2007 Makino SP-43 Makino WireWIZARD Excellent Yes 2007 Makino SP-43 Makino WireWIZARD E2475 80,000.00 -1 Yes 28.7" x 22.8" 17.8" x 11.8" x 12.6" 105 Gallons 50 Amp Table Travel Tank Power

10008 EDM - WIRE, CNC 1999 Mitsubishi FX-10 K Mitsubishi Very Good Yes 1999 Mitsubishi FX-10 K Mitsubishi E2475 40,000.00 0 Yes 24.80" x 20.86" 13.77" x 9.84" x 8.66" 105 Gallons 50 Amp Table Travel Tank Power

10018 EDM - WIRE, CNC 1998 Mitsubishi FX-10 K Mitsubishi Needs Repair Yes 1998 Mitsubishi FX-10 K Mitsubishi E2475 39,000.00 0 Yes 24.80" x 20.86" 13.79" x 9.84" x 8.66" 105 Gallons 50 Amp Table Travel Tank Power

10017 EDM - WIRE, CNC 1999 Mitsubishi FX-10 K Mitsubishi Very Good Yes 1999 Mitsubishi FX-10 K Mitsubishi E2475 40,000.00 0 Yes 24.80" x 20.86" 13.79" x 9.84" x 8.66" 105 Gallons 50 Amp Table Travel Tank Power

9800 EDM - WIRE, CNC 2000 Mitsubishi FX-20K Very Good Yes 2000 Mitsubishi FX-20K E2475 42,500.00 0 Yes 30.7" x 24.8" 19.69" x 13.77" x 11.81" 210 Gallons 50 Amp Table Travel Tank Power

9053 EDM - WIRE, CNC 1996/2007 Mitsubishi FX-10 Mitsubishi Very Good Yes 1996/2007 Mitsubishi FX-10 Mitsubishi E2475 39,900.00 0 Yes 24.80" x 20.86" 13.77" x 9.84" x 8.66" 105 Gallons 50 Amp Table Travel Tank Power

10020 EDM - WIRE, CNC 1996/2007 Mitsubishi FX-10 K Mitsubishi Very Good Yes 1996/2007 Mitsubishi FX-10 K Mitsubishi E2475 44,000.00 0 Yes 24.80" x 20.86" 13.79" x 9.84" x 8.66" 105 Gallons 50 Amp Table Travel Tank Power

9357 EDM - WIRE, CNC 1996/2005 Sodick A-500 WP Sodick Mark-21 Excellent Yes Tank - 30" x 18" x 12", Travels - 19.685" x 13.8" x 10.63", 50 Amp, Floppy Drive, Simultaneous U-V Taper Control, Chiller, APT Programmer, Automatic Wire Threading, Machine Refurbished in 2005, Very Little Use Since 1996/2005 Sodick A-500 WP Sodick Mark-21 E2475 30,000.00 -1 Yes 30" x 20" 19.85" x 13.8" x 10.63" 105 Gallons 50 Amp Table Travel Tank Power

8980 END FINISHING MACHINES (Including NC and CNC) Vaill 6A Good Yes Vaill 6A E5650 4,955.00 0 Yes 1 1/2" 3" 1 1/2" 7,800 Lbs Diameter Work Stroke Work Speed Clamp Stroke Work Pressure

8981 END FINISHING MACHINES (Including NC and CNC) Vaill 7A Good Yes Vaill 7A E5650 7,950.00 0 Yes 3 1/2" 6" 2 1/2" per sec 2" 42,000 Lbs Diameter Work Stroke Work Speed Clamp Stroke Work Pressure

9190 FLAME CUTTER, CNC 2008 Torchmate Torchmate 3 Torchmate Like New Yes 48" x 96" Cutting Capacity, 1/4" - 1 1/2" Plasma Cutting Capacity, Hypertherm 1650 Head, Automatic Height Control Sensing On Plasma Head To Prevent Warping 2008 Torchmate Torchmate 3 Torchmate F1925 9,900.00 -1 Yes 1 Cut Cap. Rail Style # Head

10501 GRINDERS, BELT 1994 Timesaver 137-1HDMW Very Good Yes 37" Wide Belt, 36" x 8" Part Cap., 20 HP, Wet Base, Fully Equipped, Many Extra Grinding Belts 1994 Timesaver 137-1HDMW G3975 15,000.00 -1 Yes 37" 36" 8" 20 Wet Conveyor Width Max. Part Width Max. Part Height HP Collector System

8999 GRINDERS, CRANKSHAFT Landis 22" x 76" Good Yes Landis 22" x 76" G4526 37,500.00 0 Yes 1 Swing Centers Wheel HP Stoke

9001 GRINDERS, CRANKSHAFT Landis 22" x 76" Good Yes Landis 22" x 76" G4526 26,500.00 0 Yes 1 Swing Centers Wheel HP Stoke

8995 GRINDERS, CRANKSHAFT Schou 1500/270 Good Yes Schou 1500/270 G4526 19,500.00 0 Yes 1 Swing Centers Wheel HP Stoke

8996 GRINDERS, CRANKSHAFT Schou 1600/260P Good Yes Schou 1600/260P G4526 19,500.00 0 Yes 1 Swing Centers Wheel HP Stoke

8994 GRINDERS, CRANKSHAFT 1983 Schou 2000/340 Good Yes 1983 Schou 2000/340 G4526 19,500.00 0 Yes 1 Swing Centers Wheel HP Stoke

8484 GRINDERS, CYLINDRICAL UNIVERSAL 19?? Cincinnati DE Fair Yes 19?? Cincinnati DE G4800 -1 Yes 1 Swing Centers Table Grind Wheel Work Wheel

8711 GRINDERS, CYLINDRICAL UNIVERSAL 1975 Heald 273A Very Good Yes 1975 Heald 273A G4800 27,500.00 0 Yes 1 Swing Centers Table Grind Wheel Work Wheel

8353 GRINDERS, CYLINDRICAL UNIVERSAL 1975 Karsten KC-AS 1600 Good Yes 14.17" Work Dia., 63" Length, 14.74" x 4" x 5" Wheel, Internal Spindle, Pendant Control, Wheel Dresser, Barnes Coolant Filtration System, Holding Tight Tolerances of +/- .00025 1975 Karsten KC-AS 1600 G4800 22,500.00 -1 Yes 1 Swing Centers Table Grind Wheel Work Wheel

8992 GRINDERS, CYLINDRICAL UNIVERSAL 1995/2002 Landis 1R Fanuc 18GCA Very Good Yes 1995/2002 Landis 1R Fanuc 18GCA G4800 19,500.00 0 Yes 1 Swing Centers Table Grind Wheel Work Wheel

8193 GRINDERS, CYLINDRICAL UNIVERSAL Landis Type F Good Yes Landis Type F G4800 ######## 0 Yes 1 Swing Centers Table Grind Wheel Work Wheel

8192 GRINDERS, CYLINDRICAL UNIVERSAL 2000 SMTW H147 Very Good Yes 2000 SMTW H147 G4800 ######## 0 Yes 1 Swing Centers Table Grind Wheel Work Wheel

8247 GRINDERS, CYLINDRICAL UNIVERSAL 1983 Tos BU 28-1000 Very Good Yes 1983 Tos BU 28-1000 G4800 26,500.00 0 Yes 1 Swing Centers Table Grind Wheel Work Wheel

9732 GRINDERS, CYLINDRICAL UNIVERSAL Tos BUH 5A / 2000 Good Yes Tos BUH 5A / 2000 G4800 0 Yes 19.6" 78.6" 19.6" x 2.35" x 12" Swing Centers Table Grind Wheel Work Wheel

8190 GRINDERS, CYLINDRICAL UNIVERSAL 1988 Tos BUT 63 / 3000 Good Yes 1988 Tos BUT 63 / 3000 G4800 83,000.00 0 Yes 1 Swing Centers Table Grind Wheel Work Wheel

10548 GRINDERS, CYLINDRICAL UNIVERSAL 1997 Toyoda GUP32 Very Good Yes 12.6" Swg., 39.37" BC, 14" x 2" x 5" Wheel, 5 HP, 8" 6-Jaw Chuck, Transformer, Wheel Dresser 1997 Toyoda GUP32 G4800 22,500.00 0 Yes 12.59" 100" 9" x 100" 14" x 2" x 5" Swing Centers Table Grind Wheel Work Wheel

8191 GRINDERS, CYLINDRICAL UNIVERSAL 1988 WMW SA6 x 3000 Good Yes 1988 WMW SA6 x 3000 G4800 89,500.00 0 Yes 1 Swing Centers Table Grind Wheel Work Wheel

9050 GRINDERS, CYLINDRICAL, NC and CNC 1992 Okuma GA-44 OSP-5020G Good No 1992 Okuma GA-44 OSP-5020G G4601 52,000.00 -1 Yes 1 Max. Dia. Length Travels RPM HP

10031 GRINDERS, CYLINDRICAL, PLAIN (Angle head) CNC 1999 Mitsubishi RD-32B 50P Fanuc 18T Good Yes 1999 Mitsubishi RD-32B 50P Fanuc 18T G4765 39,500.00 0 Yes 1 Swing Max. Length Wheel Wheelhead Speed Workhead Speed

9884 GRINDERS, CYLINDRICAL, PLAIN (Angle head) CNC 2003 Mitsubishi PD-32B 50A Fanuc 21iT Very Good Yes 2003 Mitsubishi PD-32B 50A Fanuc 21iT G4765 82,500.00 0 Yes 1 Swing Max. Length Wheel Wheelhead Speed Workhead Speed

9885 GRINDERS, CYLINDRICAL, PLAIN (Angle head) CNC 2002 Mitsubishi RB-32B 50A Fanuc 16G Good Yes 2002 Mitsubishi RB-32B 50A Fanuc 16G G4765 43,000.00 0 Yes 1 Swing Max. Length Wheel Wheelhead Speed Workhead Speed

10609 GRINDERS, CYLINDRICAL_UNIVERSAL, NC and CNC 2006 Okamoto OGM-12 60 PB Fanuc Powermate-G Excellent Yes 2006 Okamoto OGM-12 60 PB Fanuc Powermate-G G4820 79,500.00 0 Yes 12.59" 60" 18" x 84" 16" x 2" x 5" 500 Swing Centers Table Wheel Work Head Speed

9004 GRINDERS, CYLINDRICAL_UNIVERSAL, NC and CNC 1999 Toyoda GU4-100 Toyoda Good Yes 1999 Toyoda GU4-100 Toyoda G4820 79,500.00 0 Yes 1 Swing Centers Table Wheel Work Head Speed

10349 GRINDERS, JIG, NC and CNC 2000 Hauser S55-400 Fanuc 16M Very Good Yes 2000 Hauser S55-400 Fanuc 16M G6720 ######## 0 Yes 1 Table Travels Max. Dia. RPM HP

9812 GRINDERS, JIG, NC and CNC 19?? Moore #1 Good Yes 19?? Moore #1 G6720 3,000.00 -1 Yes 1 Table Travels Max. Dia. RPM HP

9008 GRINDERS, JIG, NC and CNC 1997 Moore #3 Fagor 8030 Very Good Yes 1997 Moore #3 Fagor 8030 G6720 56,500.00 0 Yes 1 Table Travels Max. Dia. RPM HP

8803 GRINDERS, ROLL Cincinnati 36" x 240" Good Yes Cincinnati 36" x 240" G7426 ######## 0 Yes 1 Dia. Grind Wheel Bed HP

8224 GRINDERS, SURFACE, RECIP. TABLE, (Horizontal Spdl), NC and CNC 2000 K.O. Lee S1024523 Leematic Very Good No 24" x 10" Table, 28" x 11 3/4" Travels, 5 HP, 1,900 RPM, Leematic Programmable Control, Table Speed Flow Control Valves, Spindle RPM and Load Indicator, Separate Coolant Tank and Pump, Magnetic Chuck 2000 K.O. Lee S1024523 Leematic G8030 14,000.00 -1 Yes 1 Length x Width Under Wheel Travels Wheel Dia. HP

7837 GRINDERS, SURFACE, RECIP. TABLE, (Horizontal Spdl), NC and CNC 2003 Tru Tech TT-8000 Tru Tech Like New Yes 18" x 6" Chuck, 12" x 6" Travels, 3 HP, Pentium IV Computer, Pick-N-Place Talking Software With Built-In Program Self-Training, Fully Programmable Variable Speed Workhead, Diamond Grinding Wheel, Mounted and Balanced on Flange, Wheel Dressing Attachment, Balancing Arbor, Coolant Tank With Filter System and Hoses, 3" Ultra-Precision Grinding Unit, Through Feed Attachment For Centerless Grinding Work, Multiple Plunge, OD, ID, And Contour Grinding Capabilities, Mist Buster 500 2003 Tru Tech TT-8000 Tru Tech G8030 58,000.00 -1 Yes 1 Length x Width Under Wheel Travels Wheel Dia. HP

9718 GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. 2004 Chevalier 24" x 60" Very Good 2004 Chevalier 24" x 60" G8025 59,500.00 0 Yes 24" x 60" 24" 60" x 24" 16" 15 Table U/W Travels Grind Wheel HP

9961 GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. 1995 Chevalier Super 818 Very Good Yes 1995 Chevalier Super 818 G8025 7,000.00 -1 Yes 8" x 18" 12" 18" x 8" 8" 2 Table U/W Travels Grind Wheel HP

9719 GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. 1945 Gallmeyer and Livingston Model F Good Yes 1945 Gallmeyer and Livingston Model F G8025 26,500.00 0 Yes 24" x 96" 25" 96" x 30" 20" 30 Table U/W Travels Grind Wheel HP

9766 GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. 1977 Harig 612 Super Very Good Ye 12" x 6" Chuck, 13 1/2" X Travel, 7" Y Travel, 1 1/2 HP, 3,450 RPM, Power Longitudinal & Cross Feed, Coolant System, Walker Elector Magnetic Chuck, Fine Feed Adjust For Cross and Down Feed, New Crossfeed Screw 1977 Harig 612 Super G8025 2,400.00 -1 Yes 1 10" 13 1/2" x 7" 7" 1 1/2 Table U/W Travels Grind Wheel HP

9717 GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. 1974 Mattison 24" x 72" Very Good Yes 1974 Mattison 24" x 72" G8025 39,500.00 0 Yes 24"x 72" 20" 84" x 36" 20" 30 Table U/W Travels Grind Wheel HP

9720 GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. 1980 Mattison Model 24 Good 1980 Mattison Model 24 G8025 0 Yes 24" x 48" 18" 48" x 24" 28" 15 Table U/W Travels Grind Wheel HP

8963 GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. 2000 Okamoto ACC-1632 ST Good Yes 32" x 16" Chuck, 37.5" x 17.5" Travels, 3 HP, Hydraulic Over The Wheel Dresser, Incremental Downfeed, Walker Fine Line Chuck, Many Extras 2000 Okamoto ACC-1632 ST G8025 22,500.00 0 Yes 1 21.5" 37.4" x 17.3" 12" 5 Table U/W Travels Grind Wheel HP

8602 GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. 1992 Okamoto ACC-124N Good Yes 1992 Okamoto ACC-124N G8025 12,000.00 0 Yes 1 13" 29.5" x 13.6" 12" 5 Table U/W Travels Grind Wheel HP

9270 GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. 1999 Okamoto 820A Very Good Yes 18" x 8" Walker Magnetic Chuck, 18" Under Wheel, 20" x 8" Travels, 1 1/3 HP, Two (2) Axis DRO, Fine Cross and Vertical Feeds, Power Elevation, External Coolant Pump and Tank 1999 Okamoto 820A G8025 12,000.00 -1 Yes 1 18" 23" x 13" 8" 1 1/3 Table U/W Travels Grind Wheel HP

9007 GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. 1995 Okamoto 2040 EX Good Yes 1995 Okamoto 2040 EX G8025 54,000.00 0 Yes 1 21.5" 45.3" x 18.2" 12" 5 Table U/W Travels Grind Wheel HP

9831 LATHES, CNC, 4-AXIS, UNIVERSAL 1982 Okuma LC-40 2ST / 250 OSP-3000L Good Yes 1982 Okuma LC-40 2ST / 250 OSP-3000L L21504 14,500.00 0 Yes 23.62" 11.80" x 21.65" 2,500 3" 20 Swing Travels RPM Bar Cap. Stations

9798 LATHES, CNC, 4-AXIS, UNIVERSAL 1991 Okuma LR-15 OSP-5020L Very Good Yes 1991 Okuma LR-15 OSP-5020L L21504 15,500.00 0 Yes 17.72" 8.5" x 23.62" 3,800 2.75" 18 Swing Travels RPM Bar Cap. Stations

9743 LATHES, CNC, 4-AXIS, UNIVERSAL 1990 Okuma LR-15 OSP-5020L Good No 1990 Okuma LR-15 OSP-5020L L21504 -1 On Way 17.72" 8.5" x 23.62" 3,800 2.75" 18 Swing Travels RPM Bar Cap. Stations

8633 LATHES, CNC, 4-AXIS, W-MILLING 2006 Amera-Seiki TS-52 MC Mitsubishi 64S Demo Yes 2006 Amera-Seiki TS-52 MC Mitsubishi 64S L21254M 75,500.00 -1 Yes 12.59" 5.65" x 14.3" 4,000 2.05" 13 Swing Travels RPM Bar Cap. Stations

9737 LATHES, CNC, 4-AXIS, W-MILLING 1997 Mori-Seiki ZL-25 MC / 1000 Fanuc MSG-501 Good Yes 1997 Mori-Seiki ZL-25 MC / 1000 Fanuc MSG-501 L21254M 73,000.00 0 Yes 20.47" 11.3" x 42.9" 3,500 2.8" 20 Swing Travels RPM Bar Cap. Stations

9677 LATHES, CNC, 4-AXIS, W-MILLING 1991 Okuma LC-40M Simulturn OSP-5020L Very Good Yes 1991 Okuma LC-40M Simulturn OSP-5020L L21254M 24,000.00 0 Yes 23.62" 11.22" x 21.65" 2,500 2.75" 20 Swing Travels RPM Bar Cap. Stations

8561 LATHES, CNC, 4-AXIS, W-MILLING 1988 Okuma LC-40M Simulturn OSP-5000LG Very Good Yes 1988 Okuma LC-40M Simulturn OSP-5000LG L21254M 22,500.00 0 Yes 23.62" 11.22" x 41.34" 2,500 2.87" 20 Swing Travels RPM Bar Cap. Stations

10130 LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE 2005 Daewoo Puma-TT-2000 SY Fanuc 18iTB Very Good Yes 2005 Daewoo Puma-TT-2000 SY Fanuc 18iTB L21254MS ######## 0 Yes 31.5" 10" x 31.5" 5,000 2.6" 24 Swing Travels RPM Bar Cap. Stations

10573 LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE 2004 Daewoo Puma-TT-2000 SY Fanuc 18iT Good Yes 2004 Daewoo Puma-TT-2000 SY Fanuc 18iT L21254MS ######## 0 Yes 31.5" 10" x 31.5" 5,000 2.6" 24 Swing Travels RPM Bar Cap. Stations

10537 LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE 2010 Doosan Puma-TT-1800 SY Fanuc 31iT Very Good Yes 2010 Doosan Puma-TT-1800 SY Fanuc 31iT L21254MS ######## 0 Yes 20.6" 6.5" x 27.5" x 3.9" 4,000 2.6" 24 Swing Travels RPM Bar Cap. Stations

8266 LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE 2002 Doosan Z340SM Fanuc 18iTB Like New Yes 2002 Doosan Z340SM Fanuc 18iTB L21254MS ######## -1 Yes 26.77" 7.28" x 25.59" 5,000 2.44" 24 Swing Travels RPM Bar Cap. Stations

9450 LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE 2000 Emco Maier Emco-Turn 332 Siemens 840D Very Good No 16.92" Swing, 11.42" SOC, 8.66" Max. Cut Dia., 18.99" Max. Cut Length, 8,000 RPM, 2 - 12 Sta. Turrets, 17 HP Main, 13 HP Sub., 16C Collet Chuck on Main and Sub Spindle, Coolant Through Sub-Spindle, Parts Catcher, Bar Feed Interface, Live Tooling, LNS Quick Load Servo 2 Bar Feed, Parts Ejector on Sub-Spindle, Mist / Oil Collector, High Pressure Coolant, Live and Standard Tool Holders 2000 Emco Maier Emco-Turn 332 Siemens 840D L21254MS 60,000.00 -1 Yes 16.92" 6.299" x 20.07" 8,000 1.25" 24 Swing Travels RPM Bar Cap. Stations

8521 LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE 2001 Graziano Twin 70Y Fanuc 18iT Very Good Yes 2001 Graziano Twin 70Y Fanuc 18iT L21254MS ######## 0 Yes 18.9" 20.66" x 7.086" x 2.5" 5,000 2.5" 24 Swing Travels RPM Bar Cap. Stations

10425 LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE 2000 Mori-Seiki ZL-200 SMC Mitsubishi MSC-501 (18iTA) Good Yes 26.8" Swing, 20.1" SOC, 16.7" Turning Length, 4,000 RPM, 20 HP, Sub-Spindle, Two Turrets, Live Tooling, Full C-Axis for Main and Sub-Spindle, Overhead in Machine Auto Parts Catcher, Chip Conveyor 2000 Mori-Seiki ZL-200 SMC Mitsubishi MSC-501 (18iTA) L21254MS ######## 0 Yes 26.77" 9.3" x 20.5" 4,000 2.56 20 Swing Travels RPM Bar Cap. Stations

9746 LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE 2006 Mori-Seiki NT-3150 / 1000 SZ DCG Mori-Seiki MSX-711 T3 Very Good Yes 2006 Mori-Seiki NT-3150 / 1000 SZ DCG Mori-Seiki MSX-711 T3 L21254MS ######## 0 On Way 23.60" 27" x 42.3" 6,000 2" 40 Swing Travels RPM Bar Cap. Stations

10552 LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE 2001 Nakamura-Tome WT-150 MMY Fanuc 18iT Very Good Yes Swing 10", Swing Over C.S. 7.48", Maximum Turning Diameter 7.48", Length 15.7", Y-Axis, 5,000 RPM, 14 HP, 2 - 12 Sta. Turrets, Sub Spindle, Full C-Axis, Collet Chuck Main Spindle, 6" 3-Jaw Sub Spindle, Chip Conveyor, Parts Catcher, LNS 550 Sprigazine Bar Feed, High Pressure Coolant 2001 Nakamura-Tome WT-150 MMY Fanuc 18iT L21254MS ######## 0 Yes 10" 6.2" x 18.3" 5,000 2.5" 12 / 12 Swing Travels RPM Bar Cap. Stations

10544 LATHES, CNC, 4-AXIS, W-SUB-SPINDLE 1996 Okuma LR-15 W OSP-5020L Good Yes 1996 Okuma LR-15 W OSP-5020L L21254S 28,000.00 0 Yes 17.72" 8.5" x 23.62" 3,800 2.56" 10 / 8 Swing Travels RPM Bar Cap. Stations

10042 LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE 2005 Daewoo Puma-2000 SLYGL Fanuc 18iT Very Good Yes 2005 Daewoo Puma-2000 SLYGL Fanuc 18iT L21256MS ######## 0 Yes 23.622" 10" x 32.6" x 3.94" 4,500 2.625" 12 Swing Travels RPM Bar Cap. Stations

10612 LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE 2005 Doosan Puma MX-2500 ST Fanuc 18iTB Very Good Yes 2005 Doosan Puma MX-2500 ST Fanuc 18iTB L21256MS ######## 0 On Way 29.5" 21.85" x 43.1" x 6.3" 5,000 3.5" 40 ATC / 12 Swing Travels RPM Bar Cap. Stations

8890 LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE 1998 Mori-Seiki SL-250 B SMC / 1000 Mitsubishi MSC-501 (Fanuc 18T) Very Good Yes 1998 Mori-Seiki SL-250 B SMC / 1000 Mitsubishi MSC-501 (Fanuc 18T) L21256MS 64,500.00 0 Yes 26.8" 9.3" x 39.37" 3,500 2.87" 12 Swing Travels RPM Bar Cap. Stations

9485 LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE 1995 Okuma LT-15 M OSP-7000L Very Good Yes 1995 Okuma LT-15 M OSP-7000L L21256MS 59,500.00 0 Yes 21.65" 7.1" x 18.1" 3,800 2.75" 24 Swing Travels RPM Bar Cap. Stations

10451 LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE 1999 Okuma LT-15 M BB OSP U100L Very Good Yes 1999 Okuma LT-15 M BB OSP U100L L21256MS 89,900.00 0 Yes 21.65" 7.56" x 27.56" x 6,000 1" 24 Swing Travels RPM Bar Cap. Stations

9664 LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE 1996 Okuma LT-15 M BB OSP-7000L Good Yes 1996 Okuma LT-15 M BB OSP-7000L L21256MS 62,500.00 0 Yes 21.65" 7.56" x 27.56" 3,800 2.75" 24 Swing Travels RPM Bar Cap. Stations

8436 LATHES, CNC, GANG STYLE 1996 Amera-Seiki GT-32 Fanuc OTC Good Yes 14.3" Swing, 10.8" OCS, 4" Turning Dia., 11.8" Turn Length, 1.57" Spindle Bore, 10 HP, 12" x 20.8" Gang Slide, 16C Collet Closure 1996 Amera-Seiki GT-32 Fanuc OTC L2125G 18,500.00 -1 Yes 14.3" 11.81" x 9.45" 6,000 1.26" Swing Travels RPM Bar Cap. Stations

7297 LATHES, CNC, GANG STYLE 1997 Mazak Quick Turn-6G Good Yes 1997 Mazak Quick Turn-6G l2125g 26,000.00 -1 Yes 18.5" 11.81" x 9.45" 7,000 1.26" 6 Swing Travels RPM Bar Cap. Stations

8694 LATHES, CNC, GANG STYLE 1999 Wasino G-6 Fanuc 21iT Good Yes 15.75" Swing, 6,000 RPM, 5.5 HP, 8 Sta. Slide, Tailstock, 5C Collet Chuck, Intergrated Robot Load / Unload Gantry System, Tool Setter, Parts Stacker 1999 Wasino G-6 Fanuc 21iT L2125G 26,000.00 -1 Yes 15.75" 11.81" x 11.25" 6,000 1.5" 8 Swing Travels RPM Bar Cap. Stations

10318 LATHES, CNC, OPPOSING SPINDLES W-MILLING 1995 Mazak Multiplex 630 M Mazatrol T-Plus Very Good Yes 1995 Mazak Multiplex 630 M Mazatrol T-Plus L2125TM 89,500.00 0 Yes 22.04" 12.20" x 23.80" 3,500 2" 24 Swing Travels RPM Bar Cap. Stations

9795 LATHES, CNC, OPPOSING SPINDLES W-MILLING 1996 Okuma LT-25 OSP-7000L Good Yes 1996 Okuma LT-25 OSP-7000L L2125TM 62,500.00 0 Yes 19.67" 10.24" x 22.05" 3,500 2.75" 24 Swing Travels RPM Bar Cap. Stations

10371 LATHES, ENGINE 1968 American Maxi-Swing 70/50 Good Yes 1968 American Maxi-Swing 70/50 L3000 ######## 0 Yes 74.5" 239" 250 2 7/8" Yes Swing Centers RPM Bar Cap. Threading

10171 LATHES, ENGINE 1987 American 64" x 498" Good Yes 1987 American 64" x 498" L3000 ######## 0 Yes 64" 498" 157 2 1/2" Yes Swing Centers RPM Bar Cap. Threading

10198 LATHES, ENGINE 1953 American 64" x 498" Good Yes 1953 American 64" x 498" L3000 ######## 0 Yes 64" 498" 157 2 1/2" Yes Swing Centers RPM Bar Cap. Threading

7590 LATHES, ENGINE American 44" x 276" Good Yes American 44" x 276" L3000 32,000.00 0 Yes 44.5" 56" 157 Yes Swing Centers RPM Bar Cap. Threading

9870 LATHES, ENGINE American 44" x 156" Good Yes American 44" x 156" L3000 24,500.00 0 Yes 44" 156" 260 2 7/8" Yes Swing Centers RPM Bar Cap. Threading

9189 LATHES, ENGINE Axelson 18" x 30" Very Good Yes Axelson 18" x 30" L3000 8,600.00 0 Yes 18.5" 30" 1,127 1 9/16" Yes Swing Centers RPM Bar Cap. Threading

10199 LATHES, ENGINE Bertram 75" x 360" Good Yes Bertram 75" x 360" L3000 ######## 0 Yes 75" 360" 101 1 3/4" Yes Swing Centers RPM Bar Cap. Threading

9879 LATHES, ENGINE Betts 84"x 156" Very Good Yes Betts 84"x 156" L3000 59,500.00 0 Yes 86" 156" 63 2 1/2" No Swing Centers RPM Bar Cap. Threading

9165 LATHES, ENGINE 1964 Cincinnati 19" x 30" Good Yes 1964 Cincinnati 19" x 30" L3000 5,950.00 0 Yes 19" 30" 1,500 1 5/8" Yes Swing Centers RPM Bar Cap. Threading

7383 LATHES, ENGINE 1996 Clausing-Colchester Mastiff GH Very Good Yes 1996 Clausing-Colchester Mastiff GH L3000 21,500.00 0 Yes 21.8" 80" 1,400 3 1/2" Yes Swing Centers RPM Bar Cap. Threading

10290 LATHES, ENGINE 1979 Clausing-Colchester 21" x 120" 8100 Good Yes 21" Swg, 35" Swg. In Gap, 100" Centers, 1,400 RPM, 15 HP, 3 & 4 Jaw Chucks, Taper Attachement, Many Extras 1979 Clausing-Colchester 21" x 120" 8100 L3000 16,500.00 -1 Yes 21" 120" 1,400 3 1/2" Yes Swing Centers RPM Bar Cap. Threading

9161 LATHES, ENGINE 1987 Clausing-Colchester 15" x 50" Good Yes 1987 Clausing-Colchester 15" x 50" L3000 5,950.00 0 Yes 15" 50" 2,000 1 3/4" No Swing Centers RPM Bar Cap. Threading

7430 LATHES, ENGINE 1952 Clovis 43" x 240" Good Yes 1952 Clovis 43" x 240" L3000 24,500.00 0 Yes 43" 240" 520 3.5" Yes Swing Centers RPM Bar Cap. Threading

7980 LATHES, ENGINE Craven 112" x 312" Good Yes Craven 112" x 312" L3000 ######## 0 Yes 112" 312" 36 1 3/4" No Swing Centers RPM Bar Cap. Threading

10570 MACHINING CENTERS, VERTICAL, CNC 2000 Haas VF-3 Haas 32 BIT Very Good Yes 2000 Haas VF-3 Haas 32 BIT M0185 42,500.00 0 Yes 48" x 18" 40" x 20" x 25" 7,500 40 21 Table Travels RPM Taper ATC

10578 MACHINING CENTERS, VERTICAL, CNC 2003 Haas VF-6/40 Haas 32 BIT Very Good Yes 2003 Haas VF-6/40 Haas 32 BIT M0185 89,500.00 0 Yes 64" x 38" 64" x 32" x 30" 10,000 40 24 Table Travels RPM Taper ATC

10591 MACHINING CENTERS, VERTICAL, CNC 2005 Haas VF-5/40 Haas 32 BIT Very Good Yes 2005 Haas VF-5/40 Haas 32 BIT M0185 89,900.00 0 Yes 52" x 23" 50" x 26" x 25" 10,000 40 40 Table Travels RPM Taper ATC

10619 MACHINING CENTERS, VERTICAL, CNC 2005 Haas VF-1 Haas 32 BIT Very Good Yes 2005 Haas VF-1 Haas 32 BIT M0185 52,000.00 0 Yes 26" x 14" 20" x 16" x 20" 7,500 40 20 Table Travels RPM Taper ATC

9039 MACHINING CENTERS, VERTICAL, CNC 2003 Haas VF-4 Haas 32 BIT Good Yes 2003 Haas VF-4 Haas 32 BIT M0185 48,900.00 0 Yes 52" x 18" 50" x 20" x 25" 7,500 40 25 Table Travels RPM Taper ATC

10590 MACHINING CENTERS, VERTICAL, CNC 2003 Haas Mini-Mill Haas 32 BIT Very Good Yes 2003 Haas Mini-Mill Haas 32 BIT M0185 23,500.00 0 Yes 28.75" x 12" 16" x 12" x 10" 6,000 40 10 Table Travels RPM Taper ATC

9061 MACHINING CENTERS, VERTICAL, CNC 2001 Haas VF-4 Haas 32 BIT Very Good Yes 52" x 18" Table, 50" x 20" x 25" Travels, 7,500 RPM, 20 HP, 24 ATC, 4th Axis Interface, Remote Jog Handle, 3.5" Floppy Drive, Programmable Coolant, Remote Jog Handle, 1 MB Memory, Spindle Orientation, Coordinate Rotation and Scaling 2001 Haas VF-4 Haas 32 BIT M0185 39,900.00 0 Yes 52" x 18" 50" x 20" x 25" 7,500 40 21 Table Travels RPM Taper ATC

10600 MACHINING CENTERS, VERTICAL, CNC 2004 Haas TM-2 Haas 32 BIT Very Good Yes 2004 Haas TM-2 Haas 32 BIT M0185 29,500.00 0 Yes 57.75" x 10.5" 40" x 16" x 16" 4,000 40 10 Table Travels RPM Taper ATC

10540 MACHINING CENTERS, VERTICAL, CNC 2005 Haas VF-3 SS YT Haas 32 BIT Very Good Yes 54" x 25" Table, 40" x 26" x 25" Travels, 12,000 RPM, 40 Tpaer 30 HP, 24 ATC, 1,400 IPM, Chip Auger, Programmable Coolant Nozzle, 4th Axis Ready, 16MB Expanded Memory, Visual Quick Code, High Speed Machining Look Ahead, Coolant Through Spindle (300 psi) With Auxiliary Coolant Filter System, Renishaw Wireless Intuitive Probing and Toolpresetting System, Remote Jog Handle 2005 Haas VF-3 SS YT Haas 32 BIT M0185 84,500.00 0 Yes 54" x 25" 40" x 26" x 25" 12,000 40 24 Table Travels RPM Taper ATC

10322 MACHINING CENTERS, VERTICAL, CNC 2006 Hardinge VMC-1000XP-3 Fanuc 18iMB Exceelent Yes 2006 Hardinge VMC-1000XP-3 Fanuc 18iMB M0185 95,000.00 0 Yes 47" x 24" 40" x 24" x 24" 12,000 40 30 Table Travels RPM Taper ATC

10242 MACHINING CENTERS, VERTICAL, CNC 2004 Hardinge VMC-1000 II Fanuc OMD Very Good Yes 2004 Hardinge VMC-1000 II Fanuc OMD M0185 42,000.00 0 Yes 44" x 20" 40.16" x 20.08" x 20.08" 8,000 40 20 Table Travels RPM Taper ATC

10243 MACHINING CENTERS, VERTICAL, CNC 2000 Hardinge VMC-1000 II Fanuc OMD Very Good Yes 2000 Hardinge VMC-1000 II Fanuc OMD M0185 29,500.00 0 Yes 44" x 20" 40.16" x 20.08" x 20.08" 8,000 40 20 Table Travels RPM Taper ATC

10244 MACHINING CENTERS, VERTICAL, CNC 1998 Hardinge VMC-1000 Fanuc OMD Very Good Yes 1998 Hardinge VMC-1000 Fanuc OMD M0185 29,500.00 0 Yes 44" x 20" 40.16" x 20.08" x 20.08" 8,000 40 20 Table Travels RPM Taper ATC

9434 MACHINING CENTERS, VERTICAL, CNC 2001 Hurco VMX-50 Ultramax IV/Dual CRT Very Good Yes 59" x 26" Table, 50" x 26" x 24" Travels, 12,000 RPM's, 50 Taper, 30 HP, 30 ATC, Conversational Programming, Dual Screen Control, Chip Conveyor 2001 Hurco VMX-50 Ultramax IV/Dual CRT M0185 59,900.00 -1 Yes 59" x 26" 50" x 26" x 24" 12,000 50 30 Table Travels RPM Taper ATC

10164 MACHINING CENTERS, VERTICAL, CNC 1993 Hurco Spirit 40 SLV Fidia PC Base Good Yes 47.2" x 19.7" Table, 6,000 RPM, 15 HP, 24 ATC, Linear Guides, Full Enclosure 1993 Hurco Spirit 40 SLV Fidia PC Base M0185 12,000.00 -1 Yes 47.2" x 19.7" 40" x 20" x 25" 6,000 40 24 Table Travels RPM Taper ATC

9435 MACHINING CENTERS, VERTICAL, CNC 1998 Hurco BMC-4020 HT Ultramax SSM Very Good Yes 47" x 19.7" Table, 40" x 20" x 24" Travels, 8,000 RPM's, 40 Taper, 20 HP, 24 ATC, Rigid Tapping, RS-232 Port 1998 Hurco BMC-4020 HT Ultramax SSM M0185 32,000.00 -1 Yes 47" x 19.7" 40" x 20" x 24" 8,000 40 24 Table Travels RPM Taper ATC

10114 MACHINING CENTERS, VERTICAL, CNC 1994 Hurco BMC-30 Delta Dynapath 10 Very Good Yes 47.2" x 25.2" Table, 30" x 18" x 20" Travels, 8,000 RPM, 40 Taper, 15 HP, 24 ATC, RS-232 Port, 3D Eprom Software, Coolant System, Rigid Tapping 1994 Hurco BMC-30 Delta Dynapath 10 M0185 32,500.00 -1 Yes 47.2" x 25.2" 30" x 18" x 20" 8,000 40 24 Table Travels RPM Taper ATC

9809 MACHINING CENTERS, VERTICAL, CNC 1994 Hurco BMC-30 Ultramax II/Dual CRT Needs Repair Yes 1994 Hurco BMC-30 Ultramax II/Dual CRT M0185 16,500.00 -1 Yes 47.2" x 25.2" 30" x 20" x 20" 8,000 40 24 Table Travels RPM Taper ATC

9151 MACHINING CENTERS, VERTICAL, CNC 1991 Ikegai TV-4 Fanuc OM Good Yes 1991 Ikegai TV-4 Fanuc OM M0185 12,000.00 -1 Yes 27.5" x 16.5" 22" x 16.125" x 15.75" 6,000 40 20 Table Travels RPM Taper ATC

10611 MACHINING CENTERS, VERTICAL, CNC 1997 Johnford VMC-2024 Fanuc OM Very Good Yes 1997 Johnford VMC-2024 Fanuc OM M0185 69,500.00 0 Yes 82.9" x 34" 80.7" x 35.4" x 28" 6,000 40 24 Table Travels RPM Taper ATC

10025 MACHINING CENTERS, VERTICAL, CNC 1996 Johnford VMC-2020 Fanuc OM Good Yes 1996 Johnford VMC-2020 Fanuc OM M0185 79,500.00 0 Yes 82.9" x 34" 80.7" x 35.4" x 28" 6,000 50 20 Table Travels RPM Taper ATC

10547 MACHINING CENTERS, VERTICAL, CNC 1990 Kia VA-50 Fanuc 10M Very Good Yes 1990 Kia VA-50 Fanuc 10M M0185 33,000.00 0 Yes 62" x 19.5" 40" x 20" x 20" 3,700 50 25 Table Travels RPM Taper ATC

7618 MACHINING CENTERS, VERTICAL, CNC 2001 Kingsbury VMC-600 Fanuc 15iM Good Yes 2001 Kingsbury VMC-600 Fanuc 15iM M0185 72,000.00 0 Yes 60" x 52" 60" x 50" x 18" 8,000 50 30 Table Travels RPM Taper ATC

10445 MACHINING CENTERS, VERTICAL, CNC 1998 Kitamura Bridge Center 8 Fanuc 15M Good Yes 1998 Kitamura Bridge Center 8 Fanuc 15M M0185 ######## 0 Yes 98.4" x 35.4" 80" x 42.7" x 27.9" 6,000 50 30 Table Travels RPM Taper ATC

9807 MACHINING CENTERS, VERTICAL, CNC 1989 Kitamura Mycenter-2 Fanuc OM Good Yes 1989 Kitamura Mycenter-2 Fanuc OM M0185 -1 Yes 35.4" x 16.1" 23" x 16.9" x 18" 7,000 40 20 Table Travels RPM Taper ATC

7619 MACHINING CENTERS, VERTICAL, CNC 1998 Kitamura Mycenter-7X / 50 Yasnac I80 Good Yes 1998 Kitamura Mycenter-7X / 50 Yasnac I80 M0185 ######## 0 Yes 66.9" x 25.6" 60.2" x 25.6" x 27" 5,000 50 30 Table Travels RPM Taper ATC

9808 MACHINING CENTERS, VERTICAL, CNC 1992 Kitamura Mycenter-3 APC Yasnac I80M Good Yes 1992 Kitamura Mycenter-3 APC Yasnac I80M M0185 17,500.00 -1 Yes 39.37" x 15.6" 32.90" x 18.70" x 18" 6,000 40 60 Table Travels RPM Taper ATC

10219 MACHINING CENTERS, VERTICAL, CNC 1999 Komo VMC-40/240 Fanuc 16MB Very Good Yes 1999 Komo VMC-40/240 Fanuc 16MB M0185 ######## -1 On Way 280" x 24" 242" x 24" x 24" 10,000 40 47 Table Travels RPM Taper ATC

9015 MACHINING CENTERS, VERTICAL, CNC 1998 Leblond-Makino SNC-64 Fanuc Pro 3 CNC Very Good Yes 29.5" x 15.7" Table, 15,000 RPM, 40 Taper, 7.5 HP, 15 ATC, Graphite Package 1998 Leblond-Makino SNC-64 Fanuc Pro 3 CNC M0185 29,500.00 0 Yes 29.5" x 15.7" 23.622" x 15.748" x 15.748" 15,000 40 16 Table Travels RPM Taper ATC

9415 MACHINING CENTERS, VERTICAL, CNC 1993 Leblond-Makino SNC-64 Fanuc Pro 3 CNC Good Yes 1993 Leblond-Makino SNC-64 Fanuc Pro 3 CNC M0185 -1 On Way 29.5" x 15.7" 23.622" x 15.748" x 15.748" 15,000 40 15 Table Travels RPM Taper ATC

10615 MACHINING CENTERS, VERTICAL, CNC 2005 Makino V56 Makino Pro 5 Excellent Yes 2005 Makino V56 Makino Pro 5 M0185 ######## 0 Yes 41.3" x 21.6" 35.4" x 21.7" x 17.7" 30,000 HSK 63 25 Table Travels RPM Taper ATC

9721 GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. 1985 Okamoto PSG-208B Very Good 1985 Okamoto PSG-208B G8025 57,500.00 0 Yes 32" x 80" 29" 84.64" x 32.67" 20" 30 Table U/W Travels Grind Wheel HP

8854 GRINDERS, SURFACE, ROTARY TYPE, HORIZ. SPDL Arter A3-16 Good Yes Arter A3-16 G8080 6,800.00 0 Yes 1 Chuck Diameter Under Wheel Wheel RPM HP

8868 GRINDERS, SURFACE, ROTARY TYPE, HORIZ. SPDL 1953 Arter D-16 Good Yes 1953 Arter D-16 G8080 6,500.00 0 Yes 1 Chuck Diameter Under Wheel Wheel RPM HP

8853 GRINDERS, SURFACE, ROTARY TYPE, HORIZ. SPDL 1967 Sundstrand Model H Good Yes 1967 Sundstrand Model H G8080 18,000.00 0 Yes 1 Chuck Diameter Under Wheel Wheel RPM HP

8666 GRINDERS, SURFACE, ROTARY TYPE, VERT. SPDL Blanchard 20-36 Good Yes Blanchard 20-36 G8100 14,500.00 0 Yes 1 Table Swing U/W Grind Wheel HP

8670 GRINDERS, SURFACE, ROTARY TYPE, VERT. SPDL Blanchard 18 Good Yes Blanchard 18 G8100 17,500.00 0 Yes 1 Table Swing U/W Grind Wheel HP

7060 GRINDERS, SURFACE, ROTARY TYPE, VERT. SPDL 1967 Blanchard 22K-42 Very Good Yes 1967 Blanchard 22K-42 G8100 36,550.00 0 Yes 1 Table Swing U/W Grind Wheel HP

8671 GRINDERS, SURFACE, ROTARY TYPE, VERT. SPDL Blanchard 18-36 Good Yes Blanchard 18-36 G8100 12,500.00 0 Yes 1 Table Swing U/W Grind Wheel HP

9937 GRINDERS, SURFACE, ROTARY TYPE, VERT. SPDL 1954 Blanchard 20K-36 Good Yes 36" Chuck, 38" Swing, 12 Under Wheel, 20" Grinding Wheel, 36" Neutrifier Magnetic Chuck Control, Coolant System, Splash Guards 1954 Blanchard 20K-36 G8100 18,000.00 -1 Yes 1 Table Swing U/W Grind Wheel HP

9679 GRINDERS, SURFACE, ROTARY TYPE, VERT. SPDL Blanchard 18-36 Very Good Yes Blanchard 18-36 G8100 0 Yes 36" 39" 20" 18" 25 Table Swing U/W Grind Wheel HP

8667 GRINDERS, SURFACE, ROTARY TYPE, VERT. SPDL 1988 Elgin 36 Good Yes 1988 Elgin 36 G8100 17,500.00 0 Yes 1 Table Swing U/W Grind Wheel HP

8680 GRINDERS, SURFACE, ROTARY TYPE, VERT. SPDL Lansing 32" Like New Yes Lansing 32" G8100 38,000.00 0 Yes 1 Table Swing U/W Grind Wheel HP

10159 GRINDERS, TOOL and CUTTER, NC-CNC 2004 Anca RGX Anca 3DX-NT Very Good Yes Max. Tool Dia. / Length - 9.8" / 6", Travels - 15" x 15.4" x 15.4" x 9.449", A-Axis Length / Rotation / Taper - 5.9" / 180° / ISO 30, C-Axis - +/- 270°, 20,000 RPM, 11 HP, Color Monitor with Graphics, Ethernet Port, Dual Bi-Directional Spindles, Very Large Software Package, Forty (40) Tool Auto Loader, Approximately One Hundred Seventy Five (175) Collets For Auto Loader 2004 Anca RGX Anca 3DX-NT G8507 72,000.00 0 Yes 1 Dia. Length Travels RPM HP

8841 GRINDERS, TOOL and CUTTER, NC-CNC 1998 Anca RG-7 Anca System 32 Very Good Yes Min. - Max. Tool Dia. / Length - .079 - 6" / 13", Travels - 13.386" x 9.449" x 9.449" x 9.449", A-Axis Length / Rotation / Taper - 5.9" / 360° / ISO 50, Hoffman 600 CFM Mist Collector, PROjection Fluting, Large Selection of Tooling Including Mandrels, Collets, Wheels, Etc, Step Tool Package, Many Other Options, Machine Rebuilt by Anca in 2004, Not Used Since 1998 Anca RG-7 Anca System 32 G8507 86,000.00 -1 Yes 1 Dia. Length Travels RPM HP

8164 GRINDERS, TOOL and CUTTER, NC-CNC 1994 Anca TG-4 Fastgrind Anca Series 2000 Good Yes Max. Swing 3.15", Max. Length 15.86", 5,167 Spindle, Anca Series 2000 Control, Paper Coolant Filtration System, RS-232 Port, One (1) 50 Taper Holder with 1/8 - 1" Collets, Two (2) Wheel Arbors, Operating Only With Oil, High End Production End Mill Software (all end mills, conical taper, wordriff) 1994 Anca TG-4 Fastgrind Anca Series 2000 G8507 42,000.00 -1 Yes 1 Dia. Length Travels RPM HP

8908 GRINDERS, TOOL and CUTTER, NC-CNC 1999 Sentry TG-410 Autocon CNC Very Good Yes 1999 Sentry TG-410 Autocon CNC G8507 40,000.00 -1 On Way 1 Dia. Length Travels RPM HP

8906 GRINDERS, TOOL and CUTTER, NC-CNC 2005 Star PTG-512 Very Good Yes Max. Tool Dia. / Length - .3.937" / 21", Travels - 11.8" x 8.7" x 22", A-Axis Rotation / Taper - 360° / ISO 50, 10,000 RPM, 30 HP, NUMROTOplus Part Probing Software, NUMROTOplus 2D Grinding Simulation, Closed Loop Chiller on Grinding Spindle & Headstock, Glass Scales on All Linear Axes, HSK Wheel Mounting - Too Many Option To List - Check Out The Full Quote 2005 Star PTG-512 G8507 ######## -1 Yes 1 Dia. Length Travels RPM HP

7280 GRINDERS, TOOL and CUTTER, NC-CNC 1990 Star ATG-6DC Very Good Yes 1990 Star ATG-6DC G8507 19,500.00 -1 1 Dia. Length Travels RPM HP

5967 GRINDERS, TOOL and CUTTER, NC-CNC 1996 Unison 4000 Super TruFlute Good No Max. Swing 14", Max. Length 12", 14" x 8" x 13.5" Travels, 10 HP, A & C Axis, Operating Only With Oil, Drill, End Mill, Step Tool and Burr Software, New Spindle Installed 10/13/06 1996 Unison 4000 Super TruFlute G8507 48,000.00 -1 Yes 1 Dia. Length Travels RPM HP

7711 GRINDERS, TOOL and CUTTER, NC-CNC 1997 Walter Power Production Walter HMC 400 Good Yes Maximum Tool Diameter / Length - 12.59" / 14.46", Walter HMC 400 Control, Windows DOS Packages 1, Two (2) Wheel Arbors, Operating Only With Oil, Fire Supression Equipment 1997 Walter Power Production Walter HMC 400 G8507 70,000.00 -1 Yes 1 Dia. Length Travels RPM HP

10196 GRINDERS, TOOL and CUTTER, NC-CNC 1993 Walter Helitronic 44 Walter HMC 300 Good Yes 1993 Walter Helitronic 44 Walter HMC 300 G8507 24,500.00 0 Yes 1 Dia. Length Travels RPM HP

9873 GRINDERS, TOOL and CUTTER, NC-CNC 1997 Walter Helitronic Power Walter HMC 400 Very Good Yes 1997 Walter Helitronic Power Walter HMC 400 G8507 59,900.00 0 Yes 1 Dia. Length Travels RPM HP

7883 GRINDERS, TOOL and CUTTER, NC-CNC 1996 Walter Helitronic Power Walter HMC 400 Good Yes Maximum Tool Diameter / Length - 10.25" / 15.75", Walter HMC 400 Control, Walter HMC 400, Software Pack (1, 2, 3, and 4), Operating Only With Oil, Tailstock 1996 Walter Helitronic Power Walter HMC 400 G8507 82,000.00 -1 Yes 1 Dia. Length Travels RPM HP

7882 GRINDERS, TOOL and CUTTER, NC-CNC 1996 Walter Helitronic Power Walter HMC 400 Fair Yes Maximum Tool Diameter / Length - 10.25" / 15.75", Walter HMC 400 Control, Walter HMC 400, Software Pack (1, 2, 3, and 4), Operating Only With Oil, Tailstock 1996 Walter Helitronic Power Walter HMC 400 G8507 82,000.00 -1 Yes 1 Dia. Length Travels RPM HP

9304 INSERTION MACHINES 1992 Haeger HP6-C Good Yes 1992 Haeger HP6-C I4775 7,000.00 0 Yes 1 Tons Throat Stroke Daylight HP

8130 IRONWORKERS 1954 Buffalo Model 2 1/2 Good Yes 1954 Buffalo Model 2 1/2 P8915 10,500.00 0 Yes 125 1 13/16" 6" x 6 x 1/2" 1 9/16" 10 Tons Punch Shear Bar HP

8286 IRONWORKERS 2009 Lansing IW-55A New Yes 2009 Lansing IW-55A P8915 12,500.00 0 Yes 55 3/4" 14" x 7/16" 1 1/4" 3 Tons Punch Shear Bar HP

8434 IRONWORKERS Mubea KBL 2.5 Good Yes Mubea KBL 2.5 P8915 7,500.00 0 Yes 104 13/16" 6 5/8" 2" 7 Tons Punch Shear Bar HP

9765 IRONWORKERS Peddinghaus 210 Super 13 Very Good Yes Peddinghaus 210 Super 13 P8915 8,000.00 -1 Yes 65 1 1/16" 8" x 1/2" 1 5/8" 5 Tons Punch Shear Bar HP

9076 IRONWORKERS 2003 Piranha P-50 Very Good Yes 50 Tons, 60 SPM, 3/4" Punch Cap., 5" x 5 x 3/8"Angle Shear Cap., 15" x 5/8" Flat Shear Cap., 1/4" - 1 1/2" Round Bar Cap., 1/2" - 1" Square Bar Cap., Four (4) Way Press Brake Dies Set, Punch With Dies 2003 Piranha P-50 P8915 8,450.00 0 Yes 50 13/16" 15" x 5/8" 1 1/2" 10 Tons Punch Shear Bar HP

10626 IRONWORKERS 2001 Scotchman 4014 Excellent No 2001 Scotchman 4014 P8915 6,800.00 -1 Yes 40 1" 6" x 1/2" 2" 3 Tons Punch Shear Bar HP

9351 IRONWORKERS Uni-Hydro 120-24 Good Yes Uni-Hydro 120-24 P8915 8,950.00 0 Yes 120 1 1/2" 24" x 1/2" 1" 7.5 Tons Punch Shear Bar HP

10178 JIG BORERS, NC and CNC 1992/2002 Sip 740 Fanuc 11MF Excellent Yes 1992/2002 Sip 740 Fanuc 11MF J5100 ######## -1 Yes 1 Table Spindle Dia. RPM HP Travels

9825 KEYSEATER Mitts and Merrill Model 7B Allen Bradley Very Good Yes Mitts and Merrill Model 7B Allen Bradley K3004 48,900.00 -1 Yes 1 Width Length Table Cut FPM HP

9100 KEYSEATER 1942 Morton 30" Good Yes 1942 Morton 30" K3004 6,500.00 0 Yes 1 Width Length Table Cut FPM HP

7631 LAPPING MACHINES 1995 Speedfam BTAW-24 Good Yes 1995 Speedfam BTAW-24 L0754 11,500.00 0 Yes 1 Style Max. Part Max Plate HP

8927 LASERS 1996 Amada Pulsar LC1212XL Fanuc 16L Good Yes 1996 Amada Pulsar LC1212XL Fanuc 16L L0850 39,500.00 0 Yes 1 Table Table Load Travels Watts Cut Rate

9481 LASERS 2006 BLM Adige Lasertube Model LT72D Siemens 840D Very Good Yes 2006 BLM Adige Lasertube Model LT72D Siemens 840D L0850 ######## 0 Yes 1 Table Table Load Travels Watts Cut Rate

8525 LASERS 2003 BLM Adige Lasertube Model LT70D Siemens 840D Very Good Yes 2003 BLM Adige Lasertube Model LT70D Siemens 840D L0850 ######## 0 Yes 1 Table Table Load Travels Watts Cut Rate

9002 LASERS 1991 Cincinnati CL5-350 Fanuc Good No 1991 Cincinnati CL5-350 Fanuc L0850 40,000.00 -1 On Way 1 Table Table Load Travels Watts Cut Rate

9490 LASERS 2006 Mazak Fabri Gear 150 3D Mazak Very Good Yes 2006 Mazak Fabri Gear 150 3D Mazak L0850 ######## 0 Yes 1 Table Table Load Travels Watts Cut Rate

9482 LASERS 2005/2007 Trumpf Tubematic RC Siemens 840D Very Good Yes 2005/2007 Trumpf Tubematic RC Siemens 840D L0850 ######## 0 Yes 1 Table Table Load Travels Watts Cut Rate

9845 LATHES, CNC, 2-AXIS, CHUCKER 1996 Daewoo Puma-V-10 Fanuc OT Good Yes 1996 Daewoo Puma-V-10 Fanuc OT L2125 -1 Yes 18.5" 15.4" x 13" 3,600 1.75" 8 Swing Travels RPM Bar Cap. Stations

9846 LATHES, CNC, 2-AXIS, CHUCKER 1996 Daewoo Puma-V-10 Fanuc OT Need Minor Repairs Yes 1996 Daewoo Puma-V-10 Fanuc OT L2125 -1 Yes 18.5" 15.4" x 13" 2,000 1.75" 8 Swing Travels RPM Bar Cap. Stations

9894 LATHES, CNC, 2-AXIS, CHUCKER 2000 Daewoo Puma-V-300 G Good Yes 2000 Daewoo Puma-V-300 G L2125 -1 Yes 18.5" 15.4" x 13" 2,000 1.75" 8 Swing Travels RPM Bar Cap. Stations

10584 LATHES, CNC, 2-AXIS, CHUCKER 2006 Doosan Puma-V-850 Fanuc 18iT Very Good Yes 2006 Doosan Puma-V-850 Fanuc 18iT L2125 ######## 0 Yes 39.37" 17.5" x 36.5" 1,800 4.33" 12 + 12 Swing Travels RPM Bar Cap. Stations

10526 LATHES, CNC, 2-AXIS, CHUCKER 2007 Doosan Lynx-220A Fanuc 0iTE Very Good Yes 2007 Doosan Lynx-220A Fanuc 0iTE L2125 64,500.00 0 Yes 20.1" 6.3" x 20.9" 6,000 1.75" 12 Swing Travels RPM Bar Cap. Stations

10011 LATHES, CNC, 2-AXIS, CHUCKER 1999 Haas SL-20 Haas 32 BIT Very Good Yes 1999 Haas SL-20 Haas 32 BIT L2125 29,900.00 0 Yes 23" 8.45" x 20" 4,000 2.06" 10 Swing Travels RPM Bar Cap. Stations

9427 LATHES, CNC, 2-AXIS, CHUCKER 2008 Haas SL-20 BB APL Haas 32 BIT Like New Yes 2008 Haas SL-20 BB APL Haas 32 BIT L2125 92,500.00 0 Yes 23" 8.45" x 20" 3,400 2.5" 10 Swing Travels RPM Bar Cap. Stations

7666 LATHES, CNC, 2-AXIS, CHUCKER 2000 Hardinge Cobra-65 Fanuc 21iT Good Yes 2000 Hardinge Cobra-65 Fanuc 21iT L2125 29,900.00 0 Yes 21.3" 8.45" x 20" 4,500 2.5" 12 Swing Travels RPM Bar Cap. Stations

10351 LATHES, CNC, 2-AXIS, CHUCKER 1992 Mazak Quick Turn-15N Mazatrol T-32-2 Good Yes 1992 Mazak Quick Turn-15N Mazatrol T-32-2 L2125 17,500.00 0 Yes 17.32" 7.09" x 20.08" 4,500 1.96" 8 Swing Travels RPM Bar Cap. Stations

9987 LATHES, CNC, 2-AXIS, CHUCKER 1998 Mazak Quick Turn-40N Mazatrol T-Plus Good Yes 1998 Mazak Quick Turn-40N Mazatrol T-Plus L2125 62,000.00 -1 On Way 20.08" 9.3" x 40" 3,000 2.75" 12 Swing Travels RPM Bar Cap. Stations

10332 LATHES, CNC, 2-AXIS, CHUCKER 1998 Mazak Powermaster 1100 Mazatrol T-Plus Very Good Yes 1998 Mazak Powermaster 1100 Mazatrol T-Plus L2125 ######## 0 Yes 36" 24 1/2" x 44" 500 12.5" 8 Swing Travels RPM Bar Cap. Stations

10386 LATHES, CNC, 2-AXIS, CHUCKER 1980 Mazak Powermaster 1100 Fanuc 5T Good Yes 33" Swing, 37" Swing In Gap, 16.5" Length of Gap, 27" Swing OCS, 25" Turning Length, 1,200 RPM, 9.5" Spindle Bore and Bar Capacity,, 60 HP, 8 Station Turret, 21" x 29" Travels, 24" 3-Jaw Manual Chuck, Turret Tooling, Chip Conveyor, Tape Reader 1980 Mazak Powermaster 1100 Fanuc 5T L2125 69,900.00 -1 Yes 33" 21" x 29" 1,200 9.5" 8 Swing Travels RPM Bar Cap. Stations

9365 LATHES, CNC, 2-AXIS, CHUCKER 1981/2006 Mazak Powermaster 1600 Fanuc 18iT Rebuilt Yes 1981/2006 Mazak Powermaster 1600 Fanuc 18iT L2125 ######## 0 Yes 42" 22.5" x 44.88" 500 12.5" 8 Swing Travels RPM Bar Cap. Stations

9364 LATHES, CNC, 2-AXIS, CHUCKER 1981 Mazak Powermaster 1600 Fanuc 6T Very Good Yes 1981 Mazak Powermaster 1600 Fanuc 6T L2125 69,500.00 0 Yes 42" 22.5" x 44.88" 500 9" 8 Swing Travels RPM Bar Cap. Stations

9741 LATHES, CNC, 2-AXIS, CHUCKER 1997 Mazak Slant Turn-30 Mazatrol T-Plus Very Good Yes 21.25" Swing, 12.99" OCS, 63" Centers, 3,000 RPM, 3.15" Bore, 30 HP, 12 Station Turret, Tailstock, 10" 3-Jaw Chuck, RS-232 Port, Miscellaneous Tooling 1997 Mazak Slant Turn-30 Mazatrol T-Plus L2125 47,900.00 -1 Yes 21.25" 12.99" x 52.7" 3,000 2.75" 12 Swing Travels RPM Bar Cap. Stations

10250 LATHES, CNC, 2-AXIS, CHUCKER 1992 Miyano BNC-34 Fanuc 0T Very Good Yes 10.5" Swing, 4 1/16" Max. Turning Dia., 9" Turning Length, 5,000 RPM, 7.5 HP, 6 Sta. Turret, Tailstock, Parts Catcher, RS-232 Port, Tool Holders 1992 Miyano BNC-34 Fanuc 0T L2125 -1 On Way 10 1/2" 4" x 9 1/4" 5,000 1 1/4" 6 Swing Travels RPM Bar Cap. Stations

9966 LATHES, CNC, 2-AXIS, CHUCKER 1984 Mori-Seiki SL-8F Fanuc 6TB Very Good Yes 1984 Mori-Seiki SL-8F Fanuc 6TB L2125 ######## 0 Yes 51.1" 16.5" x 43.3" 143 8" 6 Swing Travels RPM Bar Cap. Stations

10288 LATHES, CNC, 2-AXIS, CHUCKER 1996 Mori-Seiki CL-25A Fanuc 21T Very Good Yes 1996 Mori-Seiki CL-25A Fanuc 21T L2125 -1 On Way 20.5" 10.2" x 19.7" 3,000 2.6" 10 Swing Travels RPM Bar Cap. Stations

10605 LATHES, CNC, 2-AXIS, CHUCKER 1982 Mori-Seiki SL-6B Fanuc 6TB Very Good Yes 1982 Mori-Seiki SL-6B Fanuc 6TB L2125 ######## 0 Yes 27.56" 13.77" x 33.86" 1,010 6.18" 12 Swing Travels RPM Bar Cap. Stations

8211 LATHES, CNC, 2-AXIS, CHUCKER 2000 Mori-Seiki CL-203B Mitsubishi MSG-803 Very Good Yes 2000 Mori-Seiki CL-203B Mitsubishi MSG-803 L2125 39,500.00 0 Yes 20.3" 9.25" x 12.2" 3,500 2.25" 10 Swing Travels RPM Bar Cap. Stations

10556 LATHES, CNC, 2-AXIS, CHUCKER 1998 Mori-Seiki CL-200B MSC-803L Fair Yes Swing Over Bed 20.3", Swing Over Saddle 9.5", Maximum Turning Diameter 16.14", Length 14.6", 4,500 RPM, 15 HP, 10 Sta. Turret, Tailstock, Parts Catcher, 8" 3-Jaw Chuck, Chip Conveyor, Iemca TAL 12' Bar Feed, Oil Mist Extraction Unit, Specialized 12’ Bar Carrier With Crane 1998 Mori-Seiki CL-200B MSC-803L L2125 27,500.00 0 Yes 20.3" 7.6" x 14.6" 3,500 2.55" 10 Swing Travels RPM Bar Cap. Stations

10273 LATHES, CNC, 2-AXIS, CHUCKER 1998 Mori-Seiki SL-80A Fanuc 16T Good Yes 1998 Mori-Seiki SL-80A Fanuc 16T L2125 99,500.00 0 Yes 39.4" 16.5" x 43.3" 750 8" 6 Swing Travels RPM Bar Cap. Stations

10166 LATHES, CNC, 2-AXIS, CHUCKER 1982/2003 Mori-Seiki SL-8F Fanuc OTC Very Good Yes 1982/2003 Mori-Seiki SL-8F Fanuc OTC L2125 ######## 0 Yes 51.1" 16.5" x 41.2" 143 8.5" 6 Swing Travels RPM Bar Cap. Stations

10133 LATHES, CNC, 2-AXIS, CHUCKER 1994 Mori-Seiki SL-35 B Fanuc 16T Needs Repair Yes 1994 Mori-Seiki SL-35 B Fanuc 16T L2125 19,500.00 -1 Yes 23.6" 9.4" x 33.7" 2,500 3.5" 10 Swing Travels RPM Bar Cap. Stations

9225 LATHES, CNC, 2-AXIS, CHUCKER 1999 Mori-Seiki CL-153 Mitsubishi MSG-803 Very Good Yes 1999 Mori-Seiki CL-153 Mitsubishi MSG-803 L2125 27,500.00 0 Yes 20.28" 9.25" x 12.2" 6,000 1.3" 10 Swing Travels RPM Bar Cap. Stations

7998 LATHES, CNC, 2-AXIS, CHUCKER 1982 Okuma LC-30 1C OSP-3000L Good Yes 19.69" Swing, 17.72" Turn Dia., 3,000 RPM, 40 HP, 12 Sta. Turret, Autoblok KNCS-NB 315-91 Quick Change Chuck, Miscellaneous Tool Holders, Chip Conveyor, Coolant System, Miscellaneous Spare Parts, RS-232 Port 1982 Okuma LC-30 1C OSP-3000L L2125 8,500.00 -1 Yes 19.69" 11.42" x 40.16" 3,000 2.5" 12 Swing Travels RPM Bar Cap. Stations

9056 LATHES, CNC, 2-AXIS, CHUCKER 1996 Okuma and Howa HL-20 Fanuc 18T Good No 1996 Okuma and Howa HL-20 Fanuc 18T L2125 25,000.00 -1 Yes 22" 7.1" x 18.1" 4,500 2.07" 8 Swing Travels RPM Bar Cap. Stations

9366 LATHES, CNC, 2-AXIS, CHUCKER 2010 Willis 5240-10 Fanuc OiTC New Yes 2010 Willis 5240-10 Fanuc OiTC L2125 ######## 0 Yes 52" 27" x 43" 550 10" 4 Swing Travels RPM Bar Cap. Stations

10402 LATHES, CNC, 2-AXIS, UNIVERSAL 2004 Amera-Seiki GR-2 Fanuc OTC Very Good No 2004 Amera-Seiki GR-2 Fanuc OTC L2150 -1 On Way 21.6" 9.1" x 21.6" 5,000 2" 12 Swing Travels RPM Bar Cap. Stations

10401 LATHES, CNC, 2-AXIS, UNIVERSAL 2004 Amera-Seiki GR-2 Fanuc OTC Very Good No 2004 Amera-Seiki GR-2 Fanuc OTC L2150 -1 On Way 21.6" 9.1" x 21.6" 5,000 2" 12 Swing Travels RPM Bar Cap. Stations

7702 LATHES, CNC, 2-AXIS, UNIVERSAL 2009 Amera-Seiki LT-50 / 120" Fanuc 0iTC New Yes 2009 Amera-Seiki LT-50 / 120" Fanuc 0iTC L2150 ######## -1 Yes 50" 21" x 118" 600 8.5" 12 Swing Travels RPM Bar Cap. Stations

9878 LATHES, CNC, 2-AXIS, UNIVERSAL 1981 American 37" x 96" GE 2000 Very Good Yes 1981 American 37" x 96" GE 2000 L2150 39,500.00 0 Yes 37" 12.5" x 98" 675 6.25" 4 Swing Travels RPM Bar Cap. Stations

8705 LATHES, CNC, 2-AXIS, UNIVERSAL 2002 Birmingham Top-Turn 406 Fagor 8025 Very Good Yes 16" Swing, 34" Centers, 3,000 RPM, 7.5 HP, 4 Turret, Tailstock, 8" 3-Jaw Chuck, 10" 4-Jaw Chuck, 15” Face Plate, Two (2) Ball Bearing Steady Rests, Two (2) Speed Manual Tailstock, Bison Manual 5C Collets Chuck, Threading 2002 Birmingham Top-Turn 406 Fagor 8025 L2150 14,000.00 -1 Yes 16" 8 1/4" x 30" 3,000 2 1/4" 4 Swing Travels RPM Bar Cap. Stations

9592 LATHES, CNC, 2-AXIS, UNIVERSAL 1976/96 Cincinnati 18-C GE Fanuc 18TB Very Good Yes 30.5" Swing, 2,240 RPM, 50 HP, 22.5 x 34" Travels, 4" Bar Cap., 6 I.D. & 6 O.D. Turret, 18" 3-Jaw Hydraulic Chuck, Chip Conveyor, Programmable Swing-Down Tailstock,Pendant Control,Coolant, Hard and Soft Jaws 1976/96 Cincinnati 18-C GE Fanuc 18TB L2150 ######## 0 Yes 30.5" 18" x 42.5" 2,240 3.5" 12 Swing Travels RPM Bar Cap. Stations

10333 LATHES, CNC, 2-AXIS, UNIVERSAL 1995 Daewoo Puma-12LB Mitsubishi 520L Very Good Yes 1995 Daewoo Puma-12LB Mitsubishi 520L L2150 29,500.00 0 Yes 22.4" 10.2" x 41.3" 2,000 3.75" 12 Swing Travels RPM Bar Cap. Stations

9802 LATHES, CNC, 2-AXIS, UNIVERSAL 2006 Daewoo Puma-700L Fanuc 21iTB Very Good Yes 2006 Daewoo Puma-700L Fanuc 21iTB L2150 ######## 0 Yes 40.5" 18.5" x 127.98" 1,500 6.5" 12 Swing Travels RPM Bar Cap. Stations

8773 LATHES, CNC, 2-AXIS, UNIVERSAL 1995 Daewoo Puma-8 S Fanuc OTC Good Yes 19.7" Swing, 12.2" SOC, 18" Centers, 5,000 RPM,2" Bar Cap., 20 HP, 12 Sta. Turret, 8" 3-Jaw Hydraulic Chuck, Programmable Tailstock, Chip Conveyor, Tool Eye, RS-232 Port 1995 Daewoo Puma-8 S Fanuc OTC L2150 24,500.00 -1 Yes 19.7" 7.9" x 15" 5,000 2.05" 12 Swing Travels RPM Bar Cap. Stations

10614 LATHES, CNC, 2-AXIS, UNIVERSAL 1997 Daewoo Proturn 60 x 3000 Fanuc 18TC Good Yes 1997 Daewoo Proturn 60 x 3000 Fanuc 18TC L2150 89,000.00 0 Yes 27.95" 23.8" x 122" 1,000 6.5" 6 + 8 Swing Travels RPM Bar Cap. Stations

10320 LATHES, CNC, 2-AXIS, UNIVERSAL 2001 Daewoo Lynx-210A Fanuc OiTA Very Good Yes 2001 Daewoo Lynx-210A Fanuc OiTA L2150 24,500.00 0 Yes 20.1" 6.3" x 13" 6,000 1.75" 12 Swing Travels RPM Bar Cap. Stations

10098 LATHES, CNC, 2-AXIS, UNIVERSAL 1998 Daewoo Lynx-200A Fanuc 21T Very Good Yes 1998 Daewoo Lynx-200A Fanuc 21T L2150 24,500.00 0 Yes 20.1" 6.3" x 13" 6,000 1.75" 12 Swing Travels RPM Bar Cap. Stations

7999 LATHES, CNC, 2-AXIS, UNIVERSAL 1987 Daewoo Puma-6H S Fanuc 10T Good Yes 1987 Daewoo Puma-6H S Fanuc 10T L2150 18,500.00 -1 Yes 17.75" 6.3" x 16.4" 6,000 1.26" 10 Swing Travels RPM Bar Cap. Stations

10373 LATHES, CNC, 2-AXIS, UNIVERSAL 1997 Daewoo Lynx-200A Mitsubishi Meldas 50L Very Good Yes 1997 Daewoo Lynx-200A Mitsubishi Meldas 50L L2150 22,500.00 0 Yes 18.11" 6.3" x 13" 5,000 1.5" 10 Swing Travels RPM Bar Cap. Stations

9782 LATHES, CNC, 2-AXIS, UNIVERSAL 1995 Daewoo Puma-12LB Fanuc 15T Good Yes 1995 Daewoo Puma-12LB Fanuc 15T L2150 39,900.00 0 Yes 22.4" 10.2" x 41.3" 2,000 3.75" 12 Swing Travels RPM Bar Cap. Stations

10527 LATHES, CNC, 2-AXIS, UNIVERSAL 2000 Daewoo Puma-200 LC Mitsubishi 520L Very Good 2000 Daewoo Puma-200 LC Mitsubishi 520L L2150 28,000.00 0 Yes 20.1" 9.5" x 22.83" 4,500 2.56" 12 Swing Travels RPM Bar Cap. Stations

9354 LATHES, CNC, 2-AXIS, UNIVERSAL 2008 Doosan Lynx-200A Mitsubishi M50-L Excellent Yes 2008 Doosan Lynx-200A Mitsubishi M50-L L2150 48,000.00 0 Yes 18.1" 6.3" x 13" 6,000 1.75" 12 Swing Travels RPM Bar Cap. Stations

9794 LATHES, CNC, 2-AXIS, UNIVERSAL 1999 Doosan S390L Fanuc 18T Very Good Yes 1999 Doosan S390L Fanuc 18T L2150 39,000.00 0 Yes 30.3" 10" x 39.52" 3,500 3.6" 12 Swing Travels RPM Bar Cap. Stations

9715 LATHES, CNC, 2-AXIS, UNIVERSAL 2007 Doosan Lynx-220LC Fanuc 21T Very Good Yes 2007 Doosan Lynx-220LC Fanuc 21T L2150 59,500.00 0 Yes 20.1" 6.3" x 20.9" 4,000 2.62" 12 Swing Travels RPM Bar Cap. Stations

9941 LATHES, CNC, 2-AXIS, UNIVERSAL 2006 Doosan S-400 Fanuc OiT Very Good Yes 2006 Doosan S-400 Fanuc OiT L2150 49,900.00 0 Yes 24.02" 8.45" x 28.1" 3,500 3.01" 10 Swing Travels RPM Bar Cap. Stations

10495 LATHES, CNC, 2-AXIS, UNIVERSAL 2008 Doosan Puma-400B Fanuc 21iTB Excellent Yes 2008 Doosan Puma-400B Fanuc 21iTB L2150 ######## 0 Yes 30.3" 14.3" x 43.5" 2,000 4.62" 12 Swing Travels RPM Bar Cap. Stations

6559 LATHES, CNC, 2-AXIS, UNIVERSAL 2001 Doosan T-210 Fanuc 18T Good Yes 2001 Doosan T-210 Fanuc 18T L2150 79,900.00 0 Yes 14.1" 8.27" x 7.88" 4,000 2" 10 Swing Travels RPM Bar Cap. Stations

10347 LATHES, CNC, 2-AXIS, UNIVERSAL 2001 Femco HL-55S Fanuc OT Very Good Yes 2001 Femco HL-55S Fanuc OT L2150 72,000.00 0 Yes 28.62" 13.39" x 43.31" 2,500 4.53" 12 Swing Travels RPM Bar Cap. Stations

10052 LATHES, CNC, 2-AXIS, UNIVERSAL 2000 Femco Durga 25 Fanuc OTC Good Yes 2000 Femco Durga 25 Fanuc OTC L2150 22,500.00 0 Yes 17.75" 8.45" x 20" 4,800 2" 10 Swing Travels RPM Bar Cap. Stations

10230 LATHES, CNC, 2-AXIS, UNIVERSAL 2007 Haas SL-30T Haas 32 BIT Very Good Yes 2007 Haas SL-30T Haas 32 BIT L2150 62,500.00 0 Yes 30" 11.3" x 34" 3,400 3" 12 Swing Travels RPM Bar Cap. Stations

10577 LATHES, CNC, 2-AXIS, UNIVERSAL 2005 Haas SL-30T BB Haas 32 BIT Very Good Yes 2005 Haas SL-30T BB Haas 32 BIT L2150 63,500.00 0 Yes 30" 11.3" x 24" 2,800 4" 12 Swing Travels RPM Bar Cap. Stations

10414 LATHES, CNC, 2-AXIS, UNIVERSAL 1999 Haas SL-30T Haas 32 BIT Good Yes 1999 Haas SL-30T Haas 32 BIT L2150 39,500.00 0 Yes 30" 11.3" x 34" 3,400 3" 12 Swing Travels RPM Bar Cap. Stations

10370 LATHES, CNC, 2-AXIS, UNIVERSAL 2007 Haas TL-3 Haas 32 BIT Very Good Yes 2007 Haas TL-3 Haas 32 BIT L2150 49,900.00 0 Yes 20" 12" x 60" 1,800 3" 10 Swing Travels RPM Bar Cap. Stations

10576 LATHES, CNC, 2-AXIS, UNIVERSAL 2006 Haas SL-30T Haas 32 BIT Very Good Yes 2006 Haas SL-30T Haas 32 BIT L2150 54,500.00 0 Yes 30" 11.3" x 34" 3,400 3" 12 Swing Travels RPM Bar Cap. Stations

10291 LATHES, CNC, 2-AXIS, UNIVERSAL 1999 Haas SL-20T BB Haas 32 BIT Excellent Yes 1999 Haas SL-20T BB Haas 32 BIT L2150 35,000.00 0 Yes 20" 8.45" x 20" 3,400 2.5" 10 Swing Travels RPM Bar Cap. Stations

10301 LATHES, CNC, 2-AXIS, UNIVERSAL 2005 Haas SL-30T Haas 32 BIT Very Good Yes 30" Swing, 14.5" OCS, 14.5" Max Mach., 34" BC, 3,400 RPM, 30 HP, 12 Sta. Turret, 3" Bar Cap., 10" 3-Jaw, Programmable Tailstock, Bar Feed Interface, Two (2) Speed Gear Box, Rigid Tapping, 1 Meg Memory, Parts Catcher, Spindle Orientation, High Intensity Lighting, Chip Auger, Under 1,000 Spindle Hours 2005 Haas SL-30T Haas 32 BIT L2150 69,900.00 0 Yes 30" 11.3" x 34" 3,400 3" 12 Swing Travels RPM Bar Cap. Stations

10536 LATHES, CNC, 2-AXIS, UNIVERSAL 2007 Haas TL-2 Haas 32 BIT Excellent Yes 2007 Haas TL-2 Haas 32 BIT L2150 42,500.00 0 Yes 20" 12" x 60" 1,800 3.5" 4 Swing Travels RPM Bar Cap. Stations

9503 LATHES, CNC, 2-AXIS, UNIVERSAL 2007 Haas SL-30T Haas 32 BIT Very Good Yes 2007 Haas SL-30T Haas 32 BIT L2150 64,000.00 0 Yes 30" 11.3" x 34" 2,400 3" 12 Swing Travels RPM Bar Cap. Stations

10463 LATHES, CNC, 2-AXIS, UNIVERSAL 2006 Hankook ProTurn Fanuc 21iTB Good Yes 2006 Hankook ProTurn Fanuc 21iTB L2150 ######## 0 Yes 42" 18" x 158" 630 10" 8 Swing Travels RPM Bar Cap. Stations

9780 LATHES, CNC, 2-AXIS, UNIVERSAL 1996 Hardinge Conquest T-42 Fanuc 18TC Good Yes 1996 Hardinge Conquest T-42 Fanuc 18TC L2150 29,500.00 0 Yes 21.2" 5.31" x 13.9" 4,400 2" 15 Swing Travels RPM Bar Cap. Stations

9822 LATHES, CNC, 2-AXIS, UNIVERSAL 1997 Harrison Alpha 400 Harrison / Fanuc Control Good Yes 1997 Harrison Alpha 400 Harrison / Fanuc Control L2150 17,950.00 0 Yes 16" 8.25" x 45" 2,500 2" 4 Swing Travels RPM Bar Cap. Stations

10613 LATHES, CNC, 2-AXIS, UNIVERSAL 1980 Hitachi-Seiki 4NE-600 Fanuc 6T Good Yes 1980 Hitachi-Seiki 4NE-600 Fanuc 6T L2150 10,500.00 -1 Yes 22.75" 7.87" x 24.4" 3,150 2.25 12 Swing Travels RPM Bar Cap. Stations

10194 LATHES, CNC, 2-AXIS, UNIVERSAL 1982 Hitachi-Seiki 4NE-600 Fanuc 6TB Good No 1982 Hitachi-Seiki 4NE-600 Fanuc 6TB L2150 36,500.00 -1 Yes 22.75" 7.87" x 24.4" 3,150 2.25" 12 Swing Travels RPM Bar Cap. Stations

8043 LATHES, CNC, 2-AXIS, UNIVERSAL 1986 Hitachi-Seiki Hitec-Turn 20 Seicos Multi Good Yes 17.7" Swing, 11.2" OCS, 16" Centers, 3,600 RPM, 15 HP, 10 Station Turret, 8" 3-Jaw Hydraulic Chuck, Hydraulic Tailstock With Programmable Quill, Color CRT, RS-232 Port, Turret Tooling, Coolant System, Chip Conveyor, Conversational Control 1986 Hitachi-Seiki Hitec-Turn 20 Seicos Multi L2150 19,500.00 -1 Yes 17.7" 6.7" x 13.4" 3,600 1.5" 10 Swing Travels RPM Bar Cap. Stations

9923 LATHES, CNC, 2-AXIS, UNIVERSAL 2002 Hwacheon Mega 58 Fanuc 21T Excellent Yes 2002 Hwacheon Mega 58 Fanuc 21T L2150 62,500.00 0 Yes 22.8" 6.9" x 50" 1,500 3" 8 Swing Travels RPM Bar Cap. Stations

9940 LATHES, CNC, 2-AXIS, UNIVERSAL 1982 Ikegai AX-30N Fanuc 6TB Good Yes 1982 Ikegai AX-30N Fanuc 6TB L2150 -1 Yes 23.625" 11.812" x 60" 2,500 3.5" 12 Swing Travels RPM Bar Cap. Stations

9915 LATHES, CNC, 2-AXIS, UNIVERSAL 2005 Johnford ST-70C Fanuc 21i Very Good Yes 2005 Johnford ST-70C Fanuc 21i L2150 ######## 0 Yes 31.1" 12.6" x 63" 1,200 5.5" 12 Swing Travels RPM Bar Cap. Stations

10399 LATHES, CNC, 2-AXIS, UNIVERSAL 2002 Johnford SL-65B Fanuc OiT Very Good Yes 2002 Johnford SL-65B Fanuc OiT L2150 59,900.00 0 Yes 22.83" 10" x 59" 3,500 3" 12 Swing Travels RPM Bar Cap. Stations

9545 LATHES, CNC, 2-AXIS, UNIVERSAL 1986 Kuraki LCN 12-20 Fanuc 3TB Very Good Yes b 1986 Kuraki LCN 12-20 Fanuc 3TB L2150 ######## 0 Yes 32 1/4" 10" x 75" 350 12 5/8" 4 Swing Travels RPM Bar Cap. Stations

9228 LATHES, CNC, 2-AXIS, UNIVERSAL 1982 Lodge and Shipley 1540U GE 1050 Good Yes 30" Swing, 16" SOC, 17.3 Turn Dia., 78" Centers, 2,000 RPM, 50 HP, 12 Station Turret, 15" 3-Jaw Chuck, Geared Head, Programmable Tail Stock, Steady Rest, Chip Conveyor, Coolant Through Turret 1982 Lodge and Shipley 1540U GE 1050 L2150 19,500.00 -1 Yes 30" 15.2" x 78" 2,000 4" 12 Swing Travels RPM Bar Cap. Stations

9591 LATHES, CNC, 2-AXIS, UNIVERSAL 1980/95 Lodge and Shipley Profiturn Fanuc GNO Good Yes 1980/95 Lodge and Shipley Profiturn Fanuc GNO L2150 98,000.00 0 Yes 40" 24 3/4" x 300" 650 12 1/2" 4 Swing Travels RPM Bar Cap. Stations

9229 LATHES, CNC, 2-AXIS, UNIVERSAL 1982 Lodge and Shipley 1225U GE 1050 Good Yes 25" Swing, 12" SOC, 15.2 Turn Dia., 78" Centers, 2,500 RPM, 40 HP, 12 Station Turret, 15" 3-Jaw Chuck, Geared Head, Programmable Tail Stock, Steady Rest, Chip Conveyor, Coolant Through Turret 1982 Lodge and Shipley 1225U GE 1050 L2150 19,500.00 -1 No 25" 12.2" x 78" 2,500 3" 16 Swing Travels RPM Bar Cap. Stations

9819 LATHES, CNC, 2-AXIS, UNIVERSAL 1983/97 Lodge and Shipley Profiturn 40 Fanuc GNO Very Good Yes 1983/97 Lodge and Shipley Profiturn 40 Fanuc GNO L2150 62,000.00 0 Yes 40" 24 3/4" x 300" 650 12 1/2" 4 Swing Travels RPM Bar Cap. Stations

10569 LATHES, CNC, 2-AXIS, UNIVERSAL 1994 Mazak Quick Turn-18N Mazatrol T-32B Good Yes 1994 Mazak Quick Turn-18N Mazatrol T-32B L2150 19,500.00 0 Yes 17.32" 7.09" x 20.08" 3,600 2.75 8 Swing Travels RPM Bar Cap. Stations

7480 LATHES, CNC, 2-AXIS, UNIVERSAL 1980 Mazak Powermaster R3000 Fanuc 20C Good No 1980 Mazak Powermaster R3000 Fanuc 20C L2150 99,500.00 0 Yes 36" 17.2" x 120" 1,500 5.252" 8 Swing Travels RPM Bar Cap. Stations

10598 LATHES, CNC, 2-AXIS, UNIVERSAL 1984 Mazak M-5 / 1500 Fanuc 6TB Good Yes 1984 Mazak M-5 / 1500 Fanuc 6TB L2150 34,500.00 -1 Yes 24" 21.25" x 60" 1,100 6.5 8 + 6 Swing Travels RPM Bar Cap. Stations

9037 LATHES, CNC, 2-AXIS, UNIVERSAL 2008 Mazak Quick Turn Nexus-250 Mazatrol Matrix Excellent Yes 2008 Mazak Quick Turn Nexus-250 Mazatrol Matrix L2150 92,000.00 -1 Yes 24.02" 7.5" x 20.25" 4,000 3" 12 Swing Travels RPM Bar Cap. Stations

9155 LATHES, CNC, 2-AXIS, UNIVERSAL 1988 Mazak Quick Turn-10N Mazatrol T-2 Very Good Yes 1988 Mazak Quick Turn-10N Mazatrol T-2 L2150 18,000.00 0 Yes 17.6" 6.5" x 21.4" 3,600 1.55" 8 Swing Travels RPM Bar Cap. Stations

10599 LATHES, CNC, 2-AXIS, UNIVERSAL 1984 Mazak M-5 / 2000 Fanuc 6TB Good Yes 1984 Mazak M-5 / 2000 Fanuc 6TB L2150 39,500.00 -1 Yes 24" 21.25" x 80" 1,100 6.5 8 + 6 Swing Travels RPM Bar Cap. Stations

6050 LATHES, CNC, 2-AXIS, UNIVERSAL 1980 Mazak M-4 / 1500 Fanuc 6TB Good Yes 1980 Mazak M-4 / 1500 Fanuc 6TB L2150 20,000.00 -1 Yes 22" 21.7" x 62" 2,200 2.5" 10 Swing Travels RPM Bar Cap. Stations

8312 LATHES, CNC, 2-AXIS, UNIVERSAL 1979 Mazak M-5 Fanuc 6T Good Yes 1979 Mazak M-5 Fanuc 6T L2150 49,500.00 0 Yes 24" 22" x 100" 2,300 4.1" 14 Swing Travels RPM Bar Cap. Stations

9250 LATHES, CNC, 2-AXIS, UNIVERSAL 1995 Mazak M-5 / 2500 Mazatrol T-Plus Excellent Yes 1995 Mazak M-5 / 2500 Mazatrol T-Plus L2150 89,500.00 0 Yes 24" 21.25" x 96" 1,800 6.5" 14 Swing Travels RPM Bar Cap. Stations

10492 LATHES, CNC, 2-AXIS, UNIVERSAL 1995 Mazak Quick Turn-18N Mazatrol T-Plus Good Yes 1995 Mazak Quick Turn-18N Mazatrol T-Plus L2150 31,500.00 0 Yes 17.32" 7.09" x 20.08" 4,500 2.75 8 Swing Travels RPM Bar Cap. Stations

9505 LATHES, CNC, 2-AXIS, UNIVERSAL 1992 Mazak Quick Turn-28N Mazatrol T-32-2 Good Yes 1992 Mazak Quick Turn-28N Mazatrol T-32-2 L2150 28,500.00 0 Yes 20.6" 7.87" x 40.16" 2,500 3.5" 16 Swing Travels RPM Bar Cap. Stations

9529 LATHES, CNC, 2-AXIS, UNIVERSAL 1992 Mazak Quick Turn-10N Mazatrol T-32B Good Yes 1992 Mazak Quick Turn-10N Mazatrol T-32B L2150 19,900.00 0 Yes 17.32" 7.09" x 20.08" 4,500 1.75" 8 Swing Travels RPM Bar Cap. Stations

9534 LATHES, CNC, 2-AXIS, UNIVERSAL 1993 Mazak Quick Turn-15N Mazatrol T-32B Good Yes 1993 Mazak Quick Turn-15N Mazatrol T-32B L2150 21,500.00 0 Yes 17.32" 7.09" x 20.08" 4,500 1.96" 8 Swing Travels RPM Bar Cap. Stations

9593 LATHES, CNC, 2-AXIS, UNIVERSAL 1989 Mazak Quick Turn-15 Mazatrol T-2 Very Good Yes 17.2" Swing, 3,000 RPM, 20 HP, 20.08" x 7.09" Travels, 2.44" Bar Cap., 8 Position Turret, 8" 3-Jaw Chuck, Tool Presetter, Tailstock,Parts Catcher 1989 Mazak Quick Turn-15 Mazatrol T-2 L2150 15,500.00 0 Yes 17.32" 7.09" x 20.08" 3,000 1.96" 8 Swing Travels RPM Bar Cap. Stations

10128 LATHES, CNC, 2-AXIS, UNIVERSAL 1986 Mazak Quick Turn-10N Mazatrol T-1 Fair Yes 1986 Mazak Quick Turn-10N Mazatrol T-1 L2150 -1 On Way 17.6" 6.5" x 21.4" 3,600 1.55" 8 Swing Travels RPM Bar Cap. Stations

10127 LATHES, CNC, 2-AXIS, UNIVERSAL 1985 Mazak Quick Turn-10N Mazatrol T-1 Fair Yes 1985 Mazak Quick Turn-10N Mazatrol T-1 L2150 -1 On Way 17.6" 6.5" x 21.4" 3,600 1.55" 8 Swing Travels RPM Bar Cap. Stations

9608 LATHES, CNC, 2-AXIS, UNIVERSAL 2002 Mazak Quick Turn-350 Mazatrol Fusion 640 T Good Yes 2002 Mazak Quick Turn-350 Mazatrol Fusion 640 T L2150 82,500.00 0 Yes 25.93" 10.63" x 48.03" 2,500 4" 24 Swing Travels RPM Bar Cap. Stations

10009 LATHES, CNC, 2-AXIS, UNIVERSAL 1979/1997 Mazak M-5 / 2500 Mitsubishi Meldas 500 Good Yes 1979/1997 Mazak M-5 / 2500 Mitsubishi Meldas 500 L2150 59,500.00 0 Yes 24" 21.25' x 101" 1,000 6" 8 / 4 Swing Travels RPM Bar Cap. Stations

10554 LATHES, CNC, 2-AXIS, UNIVERSAL 2001 Mazak Quick Turn-250 Mazatrol Fusion 640 T Good Yes 2001 Mazak Quick Turn-250 Mazatrol Fusion 640 T L2150 49,500.00 0 Yes 23.65" 8.46" x 20.1" 5,000 2" 12 Swing Travels RPM Bar Cap. Stations

10367 LATHES, CNC, 2-AXIS, UNIVERSAL 2001 Mazak Super Quick Turn-200 Mazatrol Fusion 640 T Good Yes 2001 Mazak Super Quick Turn-200 Mazatrol Fusion 640 T L2150 27,500.00 0 Yes 20.67" 7.48" x 22.625" 5,000 2.01" 12 Swing Travels RPM Bar Cap. Stations

9820 LATHES, CNC, 2-AXIS, UNIVERSAL 2006 Mighty Viper VT-40A Fanuc 21iTB Excellent Yes 2006 Mighty Viper VT-40A Fanuc 21iTB L2150 79,500.00 0 Yes 39.37" 17.72" x 39.37" 2,100 4" 12 Swing Travels RPM Bar Cap. Stations

10249 LATHES, CNC, 2-AXIS, UNIVERSAL 1992 Miyano BNC-34C Fanuc 0T Very Good Yes 10.5" Swing, 4 1/16" Max. Turning Dia., 9" Turning Length, 5,000 RPM, 7.5 HP, 6 Sta. Turret, Tailstock, Parts Catcher, RS-232 Port, Tool Holders 1992 Miyano BNC-34C Fanuc 0T L2150 -1 On Way 10 1/2" 4" x 9 1/4" 5,000 1 1/4" 6 Swing Travels RPM Bar Cap. Stations

10265 LATHES, CNC, 2-AXIS, UNIVERSAL 1997 Mori-Seiki SL-200 Mitsubishi MSC-501 (18iTA) Very Good Yes 1997 Mori-Seiki SL-200 Mitsubishi MSC-501 (18iTA) L2150 44,500.00 0 Yes 26.8" 9.3" x 20.5" 4,000 2.56" 12 Swing Travels RPM Bar Cap. Stations

10177 LATHES, CNC, 2-AXIS, UNIVERSAL 1980 Mori-Seiki TL-5 Fanuc 6TA Good Yes 1980 Mori-Seiki TL-5 Fanuc 6TA L2150 9,000.00 -1 Yes 24.4" 8" x 39" 2,500 2.5" 8 Swing Travels RPM Bar Cap. Stations

10132 LATHES, CNC, 2-AXIS, UNIVERSAL 1997 Mori-Seiki SL-300 B / 700 Fanuc 18iTA Needs Repair Yes 18" Swing, 27.9" B.C., 2,500 RPM, 40 HP, 12 Sta. Turret, 12" 3-Jaw Hydraulic Chuck, 1997 Mori-Seiki SL-300 B / 700 Fanuc 18iTA L2150 19,500.00 -1 18" 9.8" x 27.5" 2,500 3.5" 12 Swing Travels RPM Bar Cap. Stations

9968 LATHES, CNC, 2-AXIS, UNIVERSAL 1997 Mori-Seiki SL-65B Fanuc 18T Good Yes 1997 Mori-Seiki SL-65B Fanuc 18T L2150 ######## 0 Yes 35" 13.8" x 33.9" 1,010 5.5" 12 Swing Travels RPM Bar Cap. Stations

10441 LATHES, CNC, 2-AXIS, UNIVERSAL 1998 Mori-Seiki CL-200B Mori-Seiki MSC-803L Good Yes 1998 Mori-Seiki CL-200B Mori-Seiki MSC-803L L2150 41,000.00 0 Yes 20.8" 9.25" x 22.4" 3,500 2.5" 10 Swing Travels RPM Bar Cap. Stations

10384 LATHES, CNC, 2-AXIS, UNIVERSAL 1990 Mori-Seiki SL-65B Fanuc OT Good Yes 1990 Mori-Seiki SL-65B Fanuc OT L2150 89,500.00 0 Yes 35" 13.8" x 33.9" 1,010 5.5" 12 Swing Travels RPM Bar Cap. Stations

9786 LATHES, CNC, 2-AXIS, UNIVERSAL 1984 Mori-Seiki SL-1 Fanuc 6T Good No 16.5" Swing, 6.2" Max. Turning, 4,500 RPM, 10 HP, 8 Station Turret, Hydraulic Tailstock, 6" Collet Chuck, RS-232 Port, Turbo Chip Conveyor 1984 Mori-Seiki SL-1 Fanuc 6T L2150 10,500.00 -1 Yes 16.5" 2.7" x 10.8" 4,500 1.2" 8 Swing Travels RPM Bar Cap. Stations

9594 LATHES, CNC, 2-AXIS, UNIVERSAL 1980 Mori-Seiki LL-7B / 3000 Fanuc 6T Good Yes 1980 Mori-Seiki LL-7B / 3000 Fanuc 6T L2150 79,500.00 -1 Yes 42.9" 26.5" x 120" 750 8" 8 Swing Travels RPM Bar Cap. Stations

9381 LATHES, CNC, 2-AXIS, UNIVERSAL 1986 Mori-Seiki SL-3H Fanuc 6T Need Repair No 1986 Mori-Seiki SL-3H Fanuc 6T L2150 8,000.00 -1 Yes 22.4" 8.45" x 22" 4,000 2.5" 12 Swing Travels RPM Bar Cap. Stations

9367 LATHES, CNC, 2-AXIS, UNIVERSAL 1981 Mori-Seiki SL-7A Fanuc 6T Good Yes 35.8" Swing, 22.8" SOC, 65" Centers, 1,800 RPM, 12 Sta. Turret, 40 HP, 18" 3-Jaw Hydraulic Chuck, Tailstock, Flood Coolant System, Chip Conveyor 1981 Mori-Seiki SL-7A Fanuc 6T L2150 69,500.00 0 Yes 35.8" 15.75" x 61.02" 1,800 4.13" 12 Swing Travels RPM Bar Cap. Stations

9944 LATHES, CNC, 2-AXIS, UNIVERSAL 2002 Okuma Captain L-370 OSP-E100L Good Yes Swing Over Bed 20.8", Swing Over Saddle 16.54", Maximum Turning Diameter 14.56", Length 20", 3,800 RPM, 30 HP, 12 Sta. Turret, Tailstock, Tool Presetter, 10" 3-Jaw Chuck, Chip Conveyor, One Touch IGF 2002 Okuma Captain L-370 OSP-E100L L2150 34,500.00 0 Yes 20.08" 10.23" x 19.68" 4,500 2" 12 Swing Travels RPM Bar Cap. Stations

8974 LATHES, CNC, 2-AXIS, UNIVERSAL 1987 Okuma LC-30 1SC / 1000 OSP-5000L Good Yes 19.69" Swing, 17.72" Turn Dia., 3,000 RPM, 40 HP, 12 Sta. VDI Turret, 12" 3-Jaw Kitagawa Chuck, RS-232 Port, Miscellaneous Tool Holders, Chip Conveyor, Coolant System, Machine Rebuilt About Four (4) Years Ago - New Control, New Ball Screws, New Hydraulic Kit In Tailstock, Wipers, Installed New VDI Turret 1987 Okuma LC-30 1SC / 1000 OSP-5000L L2150 29,000.00 -1 Yes 19.69" 11.42" x 40.16" 3,000 2.5" 12 Swing Travels RPM Bar Cap. Stations

10339 LATHES, CNC, 2-AXIS, UNIVERSAL 1993 Okuma LB-15 II OSP-5020L Good Yes 1993 Okuma LB-15 II OSP-5020L L2150 18,500.00 0 Yes 20.87" 8.34" x 20.47" 4,500 2.44" 12 Swing Travels RPM Bar Cap. Stations

8260 LATHES, CNC, 2-AXIS, UNIVERSAL 1993 Okuma LB-25 OSP-5020LG Fair Yes 1993 Okuma LB-25 OSP-5020LG L2150 22,500.00 -1 Yes 24.43" 9.05" x 35.59" 3,500 2.5" 12 Swing Travels RPM Bar Cap. Stations

8325 LATHES, CNC, 2-AXIS, UNIVERSAL 1993 Okuma and Howa ACT-20 Fanuc 18T Very Good Yes 20" Swing, 13.3" SOC, 11.81" Turning Dia., 18" Turning Length, 4,500 RPM, 2" Bar Cap. 20 HP, 12 Station Turret, Tailstock, 8" 3-Jaw Hydraulic Chuck, Chip Conveyor, Parts Catcher, Barfeed Interface 1993 Okuma and Howa ACT-20 Fanuc 18T L2150 42,000.00 -1 Yes 19.68" 7.08" x 18.11" 4,500 2.44" 12 Swing Travels RPM Bar Cap. Stations

8324 LATHES, CNC, 2-AXIS, UNIVERSAL 1996 Okuma and Howa ACT-35L Fanuc 18T Very Good Yes 19.68"Swing, 17.25"SOC, 13.77" Turning Dia., 48.6 Turning Length, 3,500 RPM, 3.125" Bar Cap. 25 HP, 12 Station Turret, Programmable Tailstock Body & Quill, 12" 3-Jaw Hydraulic Chuck, Chip Conveyor, New X-Axis Ball Screw 1996 Okuma and Howa ACT-35L Fanuc 18T L2150 62,500.00 -1 Yes 19.68" 7.87" x 48.6" 3,500 3.125" 12 Swing Travels RPM Bar Cap. Stations

8377 LATHES, CNC, 2-AXIS, UNIVERSAL 2009 Poreba PNA 80/4M Fanuc OiTC New Yes 2009 Poreba PNA 80/4M Fanuc OiTC L2150 99,500.00 0 Yes 30" 15.3" x 158" 1,200 6" 8 Swing Travels RPM Bar Cap. Stations

9598 LATHES, CNC, 2-AXIS, UNIVERSAL 2007 Poreba BNC 26120 X Fanuc OiTC Very Good Yes 26" Swing, 2,400 RPM, 30 HP, 120" x 26", 4.1" Spindle Bore, 8 Position Turret, Two (2) Steady Rests, Tailstock, Coolant System, Guarding, 20" 4-Jaw Chuck 2007 Poreba BNC 26120 X Fanuc OiTC L2150 79,500.00 0 Yes 26" 26" x 120": 2,400 4.1" 8 Swing Travels RPM Bar Cap. Stations

8891 LATHES, CNC, 2-AXIS, UNIVERSAL 2008 Poreba PNA 60/2M Fanuc OiTC New Yes 2008 Poreba PNA 60/2M Fanuc OiTC L2150 69,500.00 0 Yes 23.4" 8.3" x 78.74" 2,400 4.1" 8 Swing Travels RPM Bar Cap. Stations

9815 LATHES, CNC, 2-AXIS, UNIVERSAL 2001 Romi M-20 Fanuc 21iT Excellent Yes 2001 Romi M-20 Fanuc 21iT L2150 45,000.00 0 Yes 20.5" 11" x 60" 2,200 3.15" 4 Swing Travels RPM Bar Cap. Stations

10113 LATHES, CNC, 2-AXIS, UNIVERSAL 2003 Romi M-20 Fanuc 21iT Very Good Yes 20.5" Swing, 17.2" SOC, 10.2" Tunr Dia., 60" Centers, 3,000 RPM, 2.56" Spindle Bore, 15 HP, Quick Change Tool Post, 12.5" 3-Jaw Chuck, Conversational Program System, Constant Surface Speed, Under 1,400 Cutting Hours 2003 Romi M-20 Fanuc 21iT L2150 39,900.00 -1 Yes 20.5" 11" x 60" 3,000 2.56" 4 Swing Travels RPM Bar Cap. Stations

10483 LATHES, CNC, 2-AXIS, UNIVERSAL 2005 Romi M-20 Fanuc 21iT Like New Yes 2005 Romi M-20 Fanuc 21iT L2150 64,500.00 0 Yes 20.47" 11.02" x 60" 2,200 3.15" 4 Swing Travels RPM Bar Cap. Stations

9597 LATHES, CNC, 2-AXIS, UNIVERSAL Stanko CAK6163D Fanuc 0iTC Very Good Yes 24.8" Swing, 1,000 RPM, 5 HP, 112.2" x 12.6" Travels, 4.9" Spindle Bore, 4 Position Turret, Two (2) Steady Rests, Tailstock, Coolant System Stanko CAK6163D Fanuc 0iTC L2150 65,000.00 0 Yes 24.8" 12.6" x 112.2" 1,000 4.9" 4 Swing Travels RPM Bar Cap. Stations

10596 LATHES, CNC, 2-AXIS, UNIVERSAL 2000 Supermax TC-36 Fanuc 18T Very Good Yes 2000 Supermax TC-36 Fanuc 18T L2150 39,500.00 0 Yes 27.16" 12.20" x 49.21" 7 - 2,500 3.5" 12 Swing Travels RPM Bar Cap. Stations

5961 LATHES, CNC, 2-AXIS, UNIVERSAL 1990 Timemaster 350 CNC Fanuc OTA Good Yes 1990 Timemaster 350 CNC Fanuc OTA L2150 82,000.00 0 Yes 29.5" 20.866" x 81.125" 1,255 8.1" 12 Swing Travels RPM Bar Cap. Stations

7750 LATHES, CNC, 2-AXIS, UNIVERSAL 2008 Toolmex TUR-930 MN/236 Fanuc 21iT New Yes 2008 Toolmex TUR-930 MN/236 Fanuc 21iT L2150 ######## 0 Yes 37.4" 19.3" x 238" 1,200 5.5" 8 Swing Travels RPM Bar Cap. Stations

10060 LATHES, CNC, 2-AXIS, UNIVERSAL 2010 Willis 3280 Fanuc OiTD New Yes 2010 Willis 3280 Fanuc OiTD L2150 ######## 0 Yes 31.5" 21" x 72" 600 10" 8 / 4 Swing Travels RPM Bar Cap. Stations

10038 LATHES, CNC, 2-AXIS, UNIVERSAL 2010 Willis 32120 Fanuc OiTC New Yes 2010 Willis 32120 Fanuc OiTC L2150 ######## -1 Yes 31.5" 21" x 112" 600 12" 8 / 4 Swing Travels RPM Bar Cap. Stations

10012 LATHES, CNC, 2-AXIS, UNIVERSAL 1997 Yang SML-20 Fanuc OiTD Very Good Yes 1997 Yang SML-20 Fanuc OiTD L2150 27,500.00 0 Yes 18.9" 8.45" x 20" 4,000 2.4" 8 Swing Travels RPM Bar Cap. Stations

9771 LATHES, CNC, 2-AXIS, W- SUB-SPINDLE 1999 Daewoo Puma-250 SB Fanuc 18T Good Yes 1999 Daewoo Puma-250 SB Fanuc 18T L2125S 34,500.00 0 Yes 22.4" 7.87" x 26.77" 4,000 3.03" 12 Swing Travels RPM Bar Cap. Stations

10289 LATHES, CNC, 2-AXIS, W- SUB-SPINDLE 1999 Daewoo Puma-250 SB Fanuc 18T Very Good Yes 1999 Daewoo Puma-250 SB Fanuc 18T L2125S -1 On Way 22.4" 7.87" x 6.99" 4,000 1.5" 12 Swing Travels RPM Bar Cap. Stations

8888 LATHES, CNC, 2-AXIS, W- SUB-SPINDLE 2000 Mazak Super Quick Turn-250S Mazatrol Fusion 640T Very Good Yes 2000 Mazak Super Quick Turn-250S Mazatrol Fusion 640T L2125S 79,500.00 0 Yes 20.67" 7.5" x 20.9" 4,000 2.5" 12 Swing Travels RPM Bar Cap. Stations

10529 LATHES, CNC, 2-AXIS, W- SUB-SPINDLE 2002 Okuma Captain L-370 W OSP-E100L Very Good Yes 2002 Okuma Captain L-370 W OSP-E100L L2125S 69,500.00 0 Yes 20.08" 10.23" x 20.47" 4,500 2.5" 12 Swing Travels RPM Bar Cap. Stations

10181 LATHES, CNC, 2-AXIS, W- SUB-SPINDLE 1995 Okuma Cadet LNC-8 W OSP-5020L Good Yes 1995 Okuma Cadet LNC-8 W OSP-5020L L2125S 32,500.00 0 Yes 15.75" 6.89" x 16.53" 3,500 1.77" 12 Swing Travels RPM Bar Cap. Stations

9666 LATHES, CNC, 3-AXIS, CHUCKER W-MILLING 2008 Doosan Puma-V-550M Fanuc 21iTB Like New Yes 2008 Doosan Puma-V-550M Fanuc 21iTB L2125M ######## 0 Yes 31.5" 15.4" x 31" 2,000 1.75" 10 Swing Travels RPM Bar Cap. Stations

9356 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 2002 Akira-Seiki SLC-35 Fanuc OTC Very Good Yes 2002 Akira-Seiki SLC-35 Fanuc OTC L2150M 52,000.00 0 Yes 25" 8" x 23.2" 4,000 3.03" 12 Swing Travels RPM Bar Cap. Stations

8239 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 2008 Amera-Seiki T-310 MC Fanuc 0iTC Like New Yes 2008 Amera-Seiki T-310 MC Fanuc 0iTC L2150M 96,000.00 -1 Yes 23.6" 8.85" x 30.31" 4,200 3.03" 12 Swing Travels RPM Bar Cap. Stations

9793 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 2008 Amera-Seiki T-312 MC Fanuc 0iTC New Yes 2008 Amera-Seiki T-312 MC Fanuc 0iTC L2150M 99,900.00 -1 Yes 23.6" 8.85" x 30" 3,400 3.5" 12 Swing Travels RPM Bar Cap. Stations

10284 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 2007 Doosan Puma-280 LM Fanuc 21iTB Very Good Yes 2007 Doosan Puma-280 LM Fanuc 21iTB L2150M 80,000.00 0 Yes 23" 11.1" x 36.8" 2,800 3" 12 Swing Travels RPM Bar Cap. Stations

9525 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 1995 Hitachi-Seiki Hi-Cell CA-23 Seicos Sigma LIII Good Yes 1995 Hitachi-Seiki Hi-Cell CA-23 Seicos Sigma LIII L2150M 32,500.00 0 Yes 17.3" 8.5" x 20.9" 4,000 2.5" 16 Swing Travels RPM Bar Cap. Stations

10003 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 2001 Mazak Integrex 400 SYB Mazatrol Fusion 640 MT Very Good Yes 2001 Mazak Integrex 400 SYB Mazatrol Fusion 640 MT L2150M ######## 0 Yes 24.01" 22.83" x 43.11" 3,000 3.03" 40 Swing Travels RPM Bar Cap. Stations

9542 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 1985 Mazak Slant Turn-60 Mill Center Mazatrol T-1 Good Yes 1985 Mazak Slant Turn-60 Mill Center Mazatrol T-1 L2150M 69,500.00 0 Yes 36.02" 25.39" x 80.12" 750 6" 15 Swing Travels RPM Bar Cap. Stations

8510 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 1997 Mazak Super Quick Turn-15M II Mazatrol T-PLUS Need Repiar Yes 1997 Mazak Super Quick Turn-15M II Mazatrol T-PLUS L2150M 39,500.00 0 Yes 20.91" 7.125" x 22.75" 4,000 2" 12 Swing Travels RPM Bar Cap. Stations

6234 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 1995 Mazak Integrex 30 / 1000 Mazatrol T-PLUS Good Yes Swing 20", Swing Over Cross Slide 15.75", Maximum Turning Diameter 20", Length 40", 3,500 RPM, 35 HP, 20 Sta. ATC, 40 Taper, 10" 3-Jaw Chuck, Chip Conveyor, Coolant Through Milling Head, User Macros, Fully Programmable Tailstock Body and Quill, Automatic Tool Eye, EIA / ISO Input Function 1995 Mazak Integrex 30 / 1000 Mazatrol T-PLUS L2150M 72,000.00 -1 Yes 20" 22.83" x 42" 3,500 3.03" 20 Swing Travels RPM Bar Cap. Stations

10572 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 2000 Mazak Integrex 70YB Mazatrol Fusion 640 MT Very Good Yes 2000 Mazak Integrex 70YB Mazatrol Fusion 640 MT L2150M ######## 0 Yes 36" 29.72" x 122.91 1,300 6.5" 80 Swing Travels RPM Bar Cap. Stations

10608 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 2000 Mazak Super Quick Turn-200M Mazatrol Fusion 640 T Very Good Yes 2000 Mazak Super Quick Turn-200M Mazatrol Fusion 640 T L2150M 69,750.00 0 Yes 20.67" 7.48" x 22.64" 5,000 2 12 Swing Travels RPM Bar Cap. Stations

10594 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 2007 Mazak Nexus Super Quick Turn-250MY Mazatrol Matrix Very Good Yes 2007 Mazak Nexus Super Quick Turn-250MY Mazatrol Matrix L2150M ######## 0 Yes 26.5" 9" x 21.28" 4,000 3" 12 Swing Travels RPM Bar Cap. Stations

10340 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 1989 Mazak Slant Turn-40 N ATC M/C Fanuc 11T Good Yes 1989 Mazak Slant Turn-40 N ATC M/C Fanuc 11T L2150M 39,500.00 0 Yes 21.25" 21.65" x 83.4" 2,200 2.5" 80 Swing Travels RPM Bar Cap. Stations

8685 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 1997 Mazak Integrex 50Y / 1500 Mazatrol T-PLUS Good Yes 1997 Mazak Integrex 50Y / 1500 Mazatrol T-PLUS L2150M ######## 0 Yes 27.95" 25.39" x 63.46" x 4.13" 3,000 2.71" 80 Swing Travels RPM Bar Cap. Stations

10152 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 2004 Mori-Seiki Super Hi-Cell CH-250 Seicos 18iTB Very Good Yes Swing 19.68", Swing Over Cross Slide 19.68", Maximum Turning Diameter 19.68", Length 28.3", 4,000 RPM, 25 HP, 20 Sta. ATC, 10" 3-Jaw Chuck & 8"-3-Jaw Chucks, Tool Presetter, Various Tool Holders 2004 Mori-Seiki Super Hi-Cell CH-250 Seicos 18iTB L2150M ######## -1 Yes 19.68" 23.6" x 39.3" x 6" 4,000 2.5" 20 Swing Travels RPM Bar Cap. Stations

8263 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 1996 Mori-Seiki MT-25B Fanuc MF-T6 Very Good Yes 1996 Mori-Seiki MT-25B Fanuc MF-T6 L2150M ######## 0 Yes 46.85" 17.72" x 45.28" x 11.81" 3,500 3.5" 30 Swing Travels RPM Bar Cap. Stations

10274 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 2005 Mori-Seiki NL-2500 MC / 700 Mori-Seiki MSX-850 Good Yes 2005 Mori-Seiki NL-2500 MC / 700 Mori-Seiki MSX-850 L2150M ######## 0 Yes 36.37" 10.24" x 31.3" 4,000 3.1" 12 Swing Travels RPM Bar Cap. Stations

9964 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 2002 Okuma Captain L-470M / 650 OSP-E100L Good Yes 2002 Okuma Captain L-470M / 650 OSP-E100L L2150M 89,500.00 0 Yes 24.4" 11.81" x 26.57" 3,000 3.5" 12 Swing Travels RPM Bar Cap. Stations

7663 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 2000 Okuma and Howa HL-35M Fanuc 18iT Very Good Yes 2000 Okuma and Howa HL-35M Fanuc 18iT L2150M 42,500.00 0 Yes 19.69" 7.87" x 24.02" 3,500 3.06" 12 Swing Travels RPM Bar Cap. Stations

8458 LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING 1999 Tacchi 71" x 551" Fanuc 16iT Very Good Yes 1999 Tacchi 71" x 551" Fanuc 16iT L2150M ######## 0 Yes 71" 39" x 551" 600 5.9" 12 Swing Travels RPM Bar Cap. Stations

6309 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 1999 Daewoo Puma-200L MSC Fanuc 18T Good Yes 1999 Daewoo Puma-200L MSC Fanuc 18T L2125MS 79,500.00 0 Yes 20.1" 5.91" x 22.83" 4,500 2.66" 12 Swing Travels RPM Bar Cap. Stations

10436 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 2001 Daewoo Puma-230 MSB Fanuc 18i Very Good Yes 2001 Daewoo Puma-230 MSB Fanuc 18i L2125MS 99,500.00 0 Yes 21.65" 8.07" x 22.83" 6,000 2.56" 12 Swing Travels RPM Bar Cap. Stations

9910 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 2005 Doosan Puma-240 MSC Fanuc 18iTB Very Good Yes 2005 Doosan Puma-240 MSC Fanuc 18iTB L2125MS 75,000.00 -1 Yes 21.65" 8.07" x 22.83" 3,500 2.56" 12 Swing Travels RPM Bar Cap. Stations

10621 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 1993 Hardinge Conquest T-42 Fanuc 18T Good Yes 1993 Hardinge Conquest T-42 Fanuc 18T L2125MS 57,500.00 0 Yes 21.2" 5.45" x 13.65" 5,000 1.625" 12 Swing Travels RPM Bar Cap. Stations

10045 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 2000 Hwacheon ECO 21HS-S-MC Fanuc 18T Good Yes 2000 Hwacheon ECO 21HS-S-MC Fanuc 18T L2125MS 39,500.00 0 Yes 23.6" 6.8" x 17.9" 4,000 2" 12 Swing Travels RPM Bar Cap. Stations

10541 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 2007 Kia Super Kia Turn-21 LMS Fanuc OiTB Excellent Yes 2007 Kia Super Kia Turn-21 LMS Fanuc OiTB L2125MS 99,500.00 0 Yes 21.7" 8.7" x 21.7" 4,000 2.56" 12 Swing Travels RPM Bar Cap. Stations

10355 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 1998 Mazak Super Quick Turn-200MS Mazatrol T-PLUS Good Yes 1998 Mazak Super Quick Turn-200MS Mazatrol T-PLUS L2125MS 49,500.00 0 Yes 20.67" 7.5" x 22.62" 4,500 2.01" 12 Swing Travels RPM Bar Cap. Stations

10141 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 2006 Mazak Integrex 300 III ST Mazatrol Fusion 640 MT Pro Very Good Yes 2006 Mazak Integrex 300 III ST Mazatrol Fusion 640 MT Pro L2125MS ######## 0 Yes 33.5" 24.8" x 62.41" x 4.53" 4,000 3" 40 Swing Travels RPM Bar Cap. Stations

7784 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 2003 Mazak Super Quick Turn-100MSY Mazatrol Fusion 640 MT Very Good Yes 2003 Mazak Super Quick Turn-100MSY Mazatrol Fusion 640 MT L2125MS ######## 0 Yes 21.65" 7.25" x 17.875" x 4" 6,000 2" 12 Swing Travels RPM Bar Cap. Stations

9753 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 1994 Miyano BND-34S Fanuc 0TC/CRT Yes 2.95" Swg, 10 HP, 8 Turning / 4 Live Tool Turret, Collet Chucks, Parts Conveyor, 12' LNS Five Tube Barfeed 1994 Miyano BND-34S Fanuc 0TC/CRT L2125MS -1 On Way 4.75" 5.50" x 11.25" 5,000 1.34" 8 Swing Travels RPM Bar Cap. Stations

9714 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 1998 Miyano BNE-46S Fanuc 18T Very Good Yes 1998 Miyano BNE-46S Fanuc 18T L2125MS 57,500.00 0 Yes 18" 5.9" x 15" 4,000 1.81" 12 Swing Travels RPM Bar Cap. Stations

10260 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 2002 Mori-Seiki MT-2002SZ Fanuc 18iT Very Good Yes 2002 Mori-Seiki MT-2002SZ Fanuc 18iT L2125MS 99,500.00 0 Yes 33.46" 22.2" x 42.4" 4,500 2.5" 20 Swing Travels RPM Bar Cap. Stations

10624 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 2007 Mori-Seiki NL-2500 SMC / 700 Mori-Seiki MSX-850 III Very Good Yes 2007 Mori-Seiki NL-2500 SMC / 700 Mori-Seiki MSX-850 III L2125MS ######## 0 Yes 36.37" 10.24" x 23.2" 6,000 2.5" 12 Swing Travels RPM Bar Cap. Stations

10087 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 2002 Mori-Seiki SL-204 SMC Mitsubishi MSG-805 Excellent Yes 2002 Mori-Seiki SL-204 SMC Mitsubishi MSG-805 L2125MS ######## -1 Yes 26.8" 9.3" x 22" 4,500 2.5" 12 Swing Travels RPM Bar Cap. Stations

9337 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 1999 Mori-Seiki SL-200 SMC Mitsubishi MSC-501 (18iTA) Good Yes 1999 Mori-Seiki SL-200 SMC Mitsubishi MSC-501 (18iTA) L2125MS 79,900.00 0 Yes 26.77" 7.87" x 52.36" 4,000 2.1" 12 Swing Travels RPM Bar Cap. Stations

10086 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 2008 Mori-Seiki NL-2500 SMC / 700 Mori-Seiki MSX-850 MB Excellent Yes 2008 Mori-Seiki NL-2500 SMC / 700 Mori-Seiki MSX-850 MB L2125MS ######## -1 Yes 36.37" 14" x 28.9" 4,000 3.1" 12 Swing Travels RPM Bar Cap. Stations

10050 LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE 2002 Okuma Captain L-370 MW BB OSP-E100L Good Yes 2002 Okuma Captain L-370 MW BB OSP-E100L L2125MS 79,500.00 0 Yes 20.08" 7.12" x 24.5" 3,800 3" 12 Swing Travels RPM Bar Cap. Stations

8634 LATHES, CNC, 4-AXIS, CHUCKER 2006 Amera-Seiki TS-42 Mitsubishi 64SM Demo Yes 2006 Amera-Seiki TS-42 Mitsubishi 64SM L21254 55,000.00 -1 Yes 12.59" 5.65" x 14.3" 4,000 1.625" 13 Swing Travels RPM Bar Cap. Stations

9296 LATHES, CNC, 4-AXIS, CHUCKER 2003 Kitako MT4-200 Fanuc 18iTA Good Yes Maximum Turning Diameter 7.8", Maximum Turning Length 3.9", 4,000 RPM, 20 HP, Two 8 Station Turrets, Four (4) 10" 3-Jaw Chucks, Air Blow, Chip Conveyor, Coolant System 2003 Kitako MT4-200 Fanuc 18iTA L21254 ######## 0 Yes 7.8" 6.3" x 9.84" 4,000 1.35" 8 Swing Travels RPM Bar Cap. Stations

10398 LATHES, CNC, 4-AXIS, CHUCKER 2006 Kitako MT4-200 Fanuc 18iTB Very Good Yes 2006 Kitako MT4-200 Fanuc 18iTB L21254 ######## 0 Yes 7.8" 6.3" x 9.84" 4,000 1.35" 8 Swing Travels RPM Bar Cap. Stations

8809 LATHES, CNC, 4-AXIS, CHUCKER 1996 Kitako MT4-200 Fanuc 18T Good Yes Maximum Turning Diameter 7.8", Maximum Turning Length 3.9", 3,200 RPM, 20 HP, Two 8 Station Turrets, Four (4) 10" 3-Jaw Chucks, Transformer, Chip Conveyor, Mist Collector 1996 Kitako MT4-200 Fanuc 18T L21254 46,500.00 -1 Yes 7.8" 6.3" x 9.84" 3,200 1.35" 8 Swing Travels RPM Bar Cap. Stations

8810 LATHES, CNC, 4-AXIS, CHUCKER 1995 Kitako MT4-200 Fanuc 18T Good Yes Maximum Turning Diameter 7.8", Maximum Turning Length 3.9", 3,200 RPM, 20 HP, Two 8 Station Turrets, Four (4) 10" 3-Jaw Chucks, Transformer, Chip Conveyor, Mist Collector 1995 Kitako MT4-200 Fanuc 18T L21254 46,500.00 -1 Yes 7.8" 6.3" x 9.84" 3,200 1.35" 16 Swing Travels RPM Bar Cap. Stations

9295 LATHES, CNC, 4-AXIS, CHUCKER 2003 Kitako MT4-200 Fanuc 18iTA Good Yes Maximum Turning Diameter 7.8", Maximum Turning Length 3.9", 4,000 RPM, 20 HP, Two 8 Station Turrets, Four (4) 10" 3-Jaw Chucks, Air Blow, Chip Conveyor, Coolant System 2003 Kitako MT4-200 Fanuc 18iTA L21254 ######## 0 Yes 7.8" 6.3" x 9.84" 4,000 1.35" 8 Swing Travels RPM Bar Cap. Stations

8998 LATHES, CNC, 4-AXIS, CHUCKER 1997 Murata MW-300G Fanuc 16TT Good Yes 11.6" Swing, 13.385 Distance Between Spindle, 6,000 RPM, 14 HP,8 Sta. Turrets, Two 6" 2-Jaw Hydraulic Chucks, Chip Conveyor, Two Multi-Position Indexing Gantry Loader With Turn Around Stations, Right Hand or Left Discharge Available, Machine Sat Idle For Eight (8) Years - Recently Gone Through 1997 Murata MW-300G Fanuc 16TT L21254 59,500.00 0 Yes 11.8" 5.11" x 5.7" 6,000 2.87" 8 Swing Travels RPM Bar Cap. Stations

9954 LATHES, CNC, 4-AXIS, CHUCKER 1997 Okuma LU-35 BB OSP-7000L Very Good Yes 1997 Okuma LU-35 BB OSP-7000L L21254 ######## -1 Yes 29.13" 14.96" x 36.22" 2,800 3.62" 22 Swing Travels RPM Bar Cap. Stations

9029 LATHES, CNC, 4-AXIS, CHUCKER 1978 Warner and Swasey 2-SC-15 Allen Bradley 7360 Good No 17 3/8" Swing, 1,178 RPM, 4.5" Spindle Bore, 50 HP, Twin Turret, 15" 3-Jaw Hydraulic Chuck, Chip Conveyor, Steady Rest, Miscellaneous Tooling, Manuals, Behind the Tape Reader 1978 Warner and Swasey 2-SC-15 Allen Bradley 7360 L21254 8,000.00 -1 No 17 3/8" 7 3/4" x 54 7/8" 1,178 4.5" 11 Swing Travels RPM Bar Cap. Stations

9897 LATHES, CNC, 4-AXIS, UNIVERSAL 1996 Mori-Seiki ZL-25 / 500 Fanuc MF-D6 Good Yes 1996 Mori-Seiki ZL-25 / 500 Fanuc MF-D6 L21504 49,500.00 0 Yes 20.47" 6.3" x 23.23" 3,500 2.8" 18 Swing Travels RPM Bar Cap. Stations

8590 LATHES, CNC, 4-AXIS, UNIVERSAL 1985 Okuma LC-40 2ST OSP-5000LG Good Yes 1985 Okuma LC-40 2ST OSP-5000LG L21504 18,500.00 0 Yes 23.62" 11.22" x 41.34" 2,500 3" 20 Swing Travels RPM Bar Cap. Stations

10607 LATHES, CNC, 4-AXIS, UNIVERSAL 1996/2010 Okuma LOC-650 OSP-E100L Like New Yes 1996/2010 Okuma LOC-650 OSP-E100L L21504 ######## 0 Yes 31" 35.5" x 80.31" 500 14.76" 12 / 12 Swing Travels RPM Bar Cap. Stations

10271 LATHES, CNC, 4-AXIS, UNIVERSAL 1986 Okuma LC-50 2ST 1250 OSP-5020L Very Good Yes 1986 Okuma LC-50 2ST 1250 OSP-5020L L21504 68,000.00 0 Yes 36.9" 12.99" x 46" 1,000 7.87" 20 Swing Travels RPM Bar Cap. Stations

10120 LATHES, ENGINE Dong Yang LS Very Good Yes Dong Yang LS L3000 -1 Yes 20" 60" 1,800 1 3/4" Yes Swing Centers RPM Bar Cap. Threading

9972 LATHES, ENGINE 1982 Geminis GE-1200-S-3G Very Good Yes 1982 Geminis GE-1200-S-3G L3000 ######## 0 Yes 47.24" 315" 280 6" Yes Swing Centers RPM Bar Cap. Threading

9991 LATHES, ENGINE 1993 Hermes 34" x 200" Very Good Yes 1993 Hermes 34" x 200" L3000 39,500.00 0 Yes 34" 200" 670 6 1/8" Yes Swing Centers RPM Bar Cap. Threading

9047 LATHES, ENGINE 1978 Kingston HL-2500 Good Yes 1978 Kingston HL-2500 L3000 12,500.00 -1 Yes 21" 100" 2,500 3 1/8" Yes Swing Centers RPM Bar Cap. Threading

7996 LATHES, ENGINE 1978 Kingston HLC-1860 Very Good Yes 1978 Kingston HLC-1860 L3000 14,500.00 -1 Yes 18" 60" 1,500 3.14" Yes Swing Centers RPM Bar Cap. Threading

10111 LATHES, ENGINE 2000 Lansing 52" x 120" Very Good Yes 2000 Lansing 52" x 120" L3000 ######## 0 Yes 52" 120" 700 25" Yes Swing Centers RPM Bar Cap. Threading

8259 LATHES, ENGINE Lansing 48" x 120" Good Yes Lansing 48" x 120" L3000 45,000.00 0 Yes 48" 120" 600 4 3/4" Yes Swing Centers RPM Bar Cap. Threading

8497 LATHES, ENGINE 1966 Leblond 2516 Very Good Yes 1966 Leblond 2516 L3000 37,500.00 0 Yes 25" 165" 1,500 1 3/4" Yes Swing Centers RPM Bar Cap. Threading

10597 LATHES, ENGINE Leblond Model NI Very Good Yes Leblond Model NI L3000 24,500.00 0 Yes 31" 52" 600 2.25" Yes Swing Centers RPM Bar Cap. Threading

10312 LATHES, ENGINE 1956 Leblond 20" x 126" Good Yes Swing Over Bed 20", Swing Over Saddle 15 1/4", Maximum Turning Length 126", 2,000 RPM, 20 HP, Tailstock,15" 3-Jaw Chuck, 18" 4-Jaw Chuck, Aloris Tool Post, Inch / Metric Threading, Taper Attachment, Thread Dial Gear Stripped on Carriage 1956 Leblond 20" x 126" L3000 9,500.00 -1 Yes 20" 126" 2,000 1 3/4" Yes Swing Centers RPM Bar Cap. Threading

9555 LATHES, ENGINE 1974 Leblond Regal Very Good Yes 1974 Leblond Regal l3000 39,500.00 0 Yes 26" 96" 400 9" No Swing Centers RPM Bar Cap. Threading

9522 LATHES, ENGINE 1956 Leblond Regal Servo-Shift Very Good Yes Swing Over Bed 19", Swing Over Saddle 11 1/4", Maximum Turning Length 78", 1,800 RPM, 5 HP, Tailstock, 12" 4-Jaw Chuck, 10" 3-Jaw Chuck, 16" Face Plate, Flex Collet Head, Follow Rest, Inch / Metric Threading, Servo Shift Controls, Aloris Tool Post, Trav-a-Dial 1956 Leblond Regal Servo-Shift L3000 9,500.00 -1 Yes 19" 78" 1,800 1 3/4" Yes Swing Centers RPM Bar Cap. Threading

10311 LATHES, ENGINE 1956 Leblond 16" x 54" Good Yes Swing Over Bed 16", Swing Over Saddle 10 1/4", Maximum Turning Length 54", 2,000 RPM, 20 HP, Tailstock,15.5" 4-Jaw Chuck, 15.5" 3-Jaw Chuck, Inch Threading, Aloris Tool Post 1956 Leblond 16" x 54" L3000 8,000.00 -1 Yes 16" 54" 2,000 1 3/4" Yes Swing Centers RPM Bar Cap. Threading

8470 LATHES, ENGINE 1982 Leblond 26" x 72" Very Good Yes 1982 Leblond 26" x 72" L3000 65,000.00 0 Yes 26" 72" 600 9 1/4" Yes Swing Centers RPM Bar Cap. Threading

10299 LATHES, ENGINE 2003 Lion 31" x 120" Very Good Yes 2003 Lion 31" x 120" L3000 59,500.00 0 Yes 31" 120" 315 14" Yes Swing Centers RPM Bar Cap. Threading

7742 LATHES, ENGINE 1965 Lodge and Shipley 3220 Magna Turn Good Yes 1965 Lodge and Shipley 3220 Magna Turn L3000 59,500.00 0 No 38" 240" 875 3 5/8" Yes Swing Centers RPM Bar Cap. Threading

9196 LATHES, ENGINE 1978 Lodge and Shipley 2XE 3220 Good Yes 1978 Lodge and Shipley 2XE 3220 L3000 49,500.00 0 Yes 34 1/2" 144" 850 7" Yes Swing Centers RPM Bar Cap. Threading

9566 LATHES, ENGINE Lodge and Shipley 34" x 100" Very Good Yes Lodge and Shipley 34" x 100" L3000 37,500.00 0 Yes 34" 100" 451 8 7/8" Yes Swing Centers RPM Bar Cap. Threading

9563 LATHES, ENGINE 1951 Lodge and Shipley 37" x 100" Very Good Yes 1951 Lodge and Shipley 37" x 100" L3000 49,500.00 0 Yes 37" 100" 451 8 7/8" Yes Swing Centers RPM Bar Cap. Threading

9164 LATHES, ENGINE 1978 Mazak Junior Very Good Yes 1978 Mazak Junior L3000 9,900.00 0 Yes 18" 40" 1,500 3 1/8" Yes Swing Centers RPM Bar Cap. Threading

9871 LATHES, ENGINE Mazak HD-34 Very Good Yes Mazak HD-34 L3000 37,500.00 0 Yes 34" 120" 1,200 4" Yes Swing Centers RPM Bar Cap. Threading

8920 LATHES, ENGINE 1975 Meuser 66" x 384" Very Good Yes 1975 Meuser 66" x 384" L3000 ######## 0 Yes 66" 384" 400 4 1/2" No Swing Centers RPM Bar Cap. Threading

8838 LATHES, ENGINE 1968 Meuser M-IV-5 Very Good Yes 36.5" Swing, 26.5" SOC, 360" Centers, 15 HP, Inch Metric Threading, Four (4) Way Tool Post, Three (3) Steady Rests 1968 Meuser M-IV-5 L3000 65,000.00 -1 Yes 36.5" 360" 710 3 5/8" Yes Swing Centers RPM Bar Cap. Threading

8507 LATHES, ENGINE Meuser 32" x 120" Good Yes Meuser 32" x 120" L3000 19,500.00 0 Yes 32" 120" 900 2 5/8" Yes Swing Centers RPM Bar Cap. Threading

10010 LATHES, ENGINE 1955 Monarch 32NN Good Yes 1955 Monarch 32NN L3000 59,500.00 0 Yes 41" 336" 450 2.25" Yes Swing Centers RPM Bar Cap. Threading

8782 LATHES, ENGINE 1952 Monarch Model 25N Good Yes 1952 Monarch Model 25N L3000 35,000.00 0 Yes 36.5" 216" 405 2.2" Yes Swing Centers RPM Bar Cap. Threading

10298 LATHES, ENGINE Monarch 24N Fair Yes Monarch 24N L3000 8,500.00 0 Yes 27" 156" 303 3 3/4" Yes Swing Centers RPM Bar Cap. Threading

9872 LATHES, ENGINE 1952 Monarch 25N Good Yes 1952 Monarch 25N L3000 29,500.00 0 Yes 36.5" 216" 405 2.2" Yes Swing Centers RPM Bar Cap. Threading

7423 LATHES, ENGINE Niles AP48H-M67 Good Yes Niles AP48H-M67 L3000 42,500.00 0 Yes 52" 240" 100 1 3/4" Yes Swing Centers RPM Bar Cap. Threading

9994 LATHES, ENGINE 1983 Niles 78" x 240" Good Yes 1983 Niles 78" x 240" L3000 94,500.00 0 Yes 78" 240" 355 8 1/2" No Swing Centers RPM Bar Cap. Threading

8428 LATHES, ENGINE Niles 40" x 300" Fair Yes Niles 40" x 300" L3000 34,500.00 0 Yes 40" 300" 240 3 3/4" No Swing Centers RPM Bar Cap. Threading

9606 LATHES, ENGINE Niles 110" x 348" Good Yes Niles 110" x 348" L3000 69,500.00 0 No 110" 348" 80.1 9.5" Yes Swing Centers RPM Bar Cap. Threading

8786 LATHES, ENGINE Niles 40" x 25' Good Yes Niles 40" x 25' L3000 34,500.00 0 Yes 40" 300" 241 1 3/4" No Swing Centers RPM Bar Cap. Threading

8901 LATHES, ENGINE Niles 72" x 324" Good Yes Niles 72" x 324" L3000 49,500.00 0 Yes 76" 324" 2,000 5.6" Yes Swing Centers RPM Bar Cap. Threading

8152 LATHES, ENGINE 1988 Poreba TPK-90 / 2M Very Good Yes 1988 Poreba TPK-90 / 2M L3000 35,000.00 0 Yes 36" 78" 1,000 3 7/8" Yes Swing Centers RPM Bar Cap. Threading

9489 LATHES, ENGINE 2006 Potisje PA 1000 DC Like New Yes 2006 Potisje PA 1000 DC L3000 ######## 0 Yes 40" 72" 800 5 1/2" Yes Swing Centers RPM Bar Cap. Threading

9867 LATHES, ENGINE 1997 Ryazan 16K40 Very Good Yes 1997 Ryazan 16K40 L3000 31,500.00 0 Yes 33.07" 118" 1,250 4.13" Yes Swing Centers RPM Bar Cap. Threading

9167 LATHES, ENGINE 1992 Summit 16" x 40" Excellent Yes 1992 Summit 16" x 40" L3000 10,500.00 0 Yes 16" 40" 1,800 3" Yes Swing Centers RPM Bar Cap. Threading

10523 LATHES, ENGINE 1977 Summit 33" x 120" Very Good Yes 1977 Summit 33" x 120" L3000 24,950.00 0 Yes 33" 120" 1,010 4 1/8" Yes Swing Centers RPM Bar Cap. Threading

8059 LATHES, ENGINE T and B 24" x 120" Good Yes T and B 24" x 120" L3000 15,500.00 0 Yes 24" 126" 600 4 1/8" Yes Swing Centers RPM Bar Cap. Threading

8494 LATHES, ENGINE 1993 Tarnow TUJ-50M Very Good Yes 1993 Tarnow TUJ-50M L3000 29,500.00 0 Yes 22" 170" 1,600 3 1/2" Yes Swing Centers RPM Bar Cap. Threading

8498 LATHES, ENGINE 2000 Tos SN-71C/4000 Excellent Yes 2000 Tos SN-71C/4000 L3000 25,500.00 0 Yes 28" 160" 1,000 2.8" Yes Swing Centers RPM Bar Cap. Threading

9973 LATHES, ENGINE 1969 Tos SU-63 Good Yes 1969 Tos SU-63 L3000 29,500.00 0 Yes 25" 260" 1,180 2 3/8" Yes Swing Centers RPM Bar Cap. Threading

8058 LATHES, ENGINE 1995 Tru-Turn CW6280 Very Good Yes 1995 Tru-Turn CW6280 L3000 19,500.00 0 Yes 31.5" 120" 1,000 4 1/8" Yes Swing Centers RPM Bar Cap. Threading

9178 LATHES, ENGINE 1981 Tuda Oilstar 10120 Very Good Yes 1981 Tuda Oilstar 10120 L3000 69,500.00 0 Yes 41.33" 72" 350 10 1/4" Yes Swing Centers RPM Bar Cap. Threading

8791 LATHES, ENGINE 1966 VDF S-500 Good Yes 1966 VDF S-500 L3000 12,500.00 0 Yes 21" 86" 2,800 3 1/8" Yes Swing Centers RPM Bar Cap. Threading

8728 LATHES, ENGINE VDF S-500 Very Good Yes VDF S-500 L3000 37,500.00 0 Yes 20" 240" 1,800 4" Yes Swing Centers RPM Bar Cap. Threading

8722 LATHES, ENGINE VDF 35" x 120" Good Yes VDF 35" x 120" L3000 23,500.00 0 Yes 35" 120" 1,000 3 3/4" Yes Swing Centers RPM Bar Cap. Threading

8790 LATHES, ENGINE VDF Boehringer 20" x 84" Good Yes VDF Boehringer 20" x 84" L3000 12,500.00 0 Yes 20" 84" 2,240 2.08" Yes Swing Centers RPM Bar Cap. Threading

7793 LATHES, ENGINE 1981 Wirth Model ARD Good Yes 1981 Wirth Model ARD L3000 25,000.00 0 Yes 32" 30" 500 12.204" Yes Swing Centers RPM Bar Cap. Threading

8217 LATHES, SECOND OPERATION 1977 Hardinge ASM-5C Good Yes 1977 Hardinge ASM-5C L4805 8,000.00 -1 Yes 12 3/4" 2 3/4" x 15" 4,200 1 3/8" 8 Swing Travels RPM Bar Cap. Stations

8230 LATHES, T TYPE 2000 Lansing CK64150 Fanuc 10T Very Good Yes 2000 Lansing CK64150 Fanuc 10T L5200 87,500.00 0 Yes 21.65" 17.32" x 32.28" 250 6 15/16" 16 Swing Travels RPM Bar Cap. Stations

8244 LATHES, TURRET - RAM TYPE 1965 Gisholt #5 Good Yes 1965 Gisholt #5 L6249 10,500.00 0 Yes 1 Swing Travels RPM Bar Cap. Stations

10026 LATHES, TURRET - RAM TYPE 1958 Warner and Swasey 3A M-1200 Good Yes 1958 Warner and Swasey 3A M-1200 L6249 7,500.00 -1 Yes 1 Swing Travels RPM Bar Cap. Stations

7925 LATHES, TURRET - RAM TYPE 1942/2000 Warner and Swasey 3A M-1200 Lot 288 Good Yes 15 3/8" Swing, SOC 7", Spindle Nose to Turret Face 26", 1,480 RPM, 7.5 HP, 6 position Turret, Collet Chuck, Coolant Pan and Pump, Haase Quick Change Tool Post, Rebuilt Seven (7) Years Ago 1942/2000 Warner and Swasey 3A M-1200 Lot 288 L6249 5,500.00 -1 Yes 1 Swing Travels RPM Bar Cap. Stations

8169 LATHES, TURRET - RAM TYPE 1957 Warner and Swasey 3A M-1200 Good Yes 15 3/8" Swing, SOC 7", Spindle Nose to Turret Face 26", 1,480 RPM, 7.5 HP, 6 position Turret, 8" 3-Jaw Chuck, Coolant Pan and Pump, Single Tool Post 1957 Warner and Swasey 3A M-1200 L6249 7,500.00 -1 Yes 1 Swing Travels RPM Bar Cap. Stations

8167 LATHES, TURRET - SADDLE TYPE Gisholt 1L Good Yes Gisholt 1L L6304 -1 Yes 1 Swing Travels RPM Bar Cap. Stations

8168 LATHES, TURRET - SADDLE TYPE Gisholt 1L Good Yes Gisholt 1L L6304 -1 Yes 1 Swing Travels RPM Bar Cap. Stations

7737 LATHES, TURRET - SADDLE TYPE 1964 Warner and Swasey 2A Good Yes 1964 Warner and Swasey 2A L6304 19,500.00 0 Yes 1 Swing Travels RPM Bar Cap. Stations

9524 MACHINING CENTERS, GANTRY TYPE, NC-CNC 1997 Awea VP-2012 Fanuc OM Very Good Yes 1997 Awea VP-2012 Fanuc OM M0120 76,900.00 0 Yes 78.7" x 43.3" 78.7" x 47.2" x 30" 5,000 50 30 Table Travels RPM Taper ATC

8984 MACHINING CENTERS, GANTRY TYPE, NC-CNC 2001/03 Awea SP-3016 Fanuc 18MC Very Good Yes 2001/03 Awea SP-3016 Fanuc 18MC M0120 ######## 0 Yes 112" x 59" 120.5" x 63" x 30" 6,000 50 60 Table Travels RPM Taper ATC

10233 MACHINING CENTERS, GANTRY TYPE, NC-CNC 1998 Cincinnati Sidewinder U5 Acramatic 950 Very Good Yes 1998 Cincinnati Sidewinder U5 Acramatic 950 M0120 ######## 0 Yes 137" x 67" 157" x 96" x 36" 6,000 50 60 Table Travels RPM Taper ATC

10620 MACHINING CENTERS, GANTRY TYPE, NC-CNC 2005 Haas GR-712 Haas 32 BIT Very Good Yes 2005 Haas GR-712 Haas 32 BIT M0120 99,000.00 0 Yes 144" x 72" 145" x 85" x 17" 15,000 40 10 Table Travels RPM Taper ATC

10223 MACHINING CENTERS, GANTRY TYPE, NC-CNC 2007 Haas GR-510 Haas 32 BIT Very Good Yes 122" x 53" Table, 121" x 61" x 11" Travels, 10,000 RPM, 40 Taper, 15 HP, 20 ATC, Remote Jog Handle, Auto Air Gun, Rigid Tapping, Coolant Tank, Quick Code, 1 Meg of Memory, Spindle Orientation, Visual Quick Code Programming, Auxiliary Home Button 2007 Haas GR-510 Haas 32 BIT M0120 0 Yes 122" x 53" 121" x 61" x 11" 10,000 40 20 Table Travels RPM Taper ATC

9836 MACHINING CENTERS, GANTRY TYPE, NC-CNC 1987/2001 Ingersoll Masterhead Fanuc 150MB Good No 1987/2001 Ingersoll Masterhead Fanuc 150MB M0120 ######## 0 Yes 138" x 98" 160" x 120" x 39" 2,500 50 32 Table Travels RPM Taper ATC

8759 MACHINING CENTERS, GANTRY TYPE, NC-CNC 1999 Ingersoll HVM Fanuc 15MB Very Good Yes 1999 Ingersoll HVM Fanuc 15MB M0120 ######## 0 Yes 196.7" x 98.4" 236.2" x 118.1" x 53.4" 24,000 63 60 Table Travels RPM Taper ATC

10585 MACHINING CENTERS, GANTRY TYPE, NC-CNC 2004 Johnford DMC-2100H Fanuc 18iMB Very Good Yes 2004 Johnford DMC-2100H Fanuc 18iMB M0120 ######## 0 Yes 86.6" x 59" 83" x 70" x 42" 10,000 40 24 Table Travels RPM Taper ATC

10409 MACHINING CENTERS, GANTRY TYPE, NC-CNC 2007 Johnford DMC-3100H Fanuc 18iMB Excellent Yes 2007 Johnford DMC-3100H Fanuc 18iMB M0120 ######## 0 Yes 126" x 59" 122" x 70" x 31.5" 6,000 50 40 Table Travels RPM Taper ATC

10434 MACHINING CENTERS, GANTRY TYPE, NC-CNC 2005 Johnford DMC-2100HN Fanuc 18iMB Very Good Yes 2005 Johnford DMC-2100HN Fanuc 18iMB M0120 ######## 0 Yes 86.6 " x 43.3" 82.7" x 51" x 31.5 15,000 HSK 100A 56 Table Travels RPM Taper ATC

7624 MACHINING CENTERS, GANTRY TYPE, NC-CNC 2001 Masco Bridgemax Fanuc 16i Very Good Yes 2001 Masco Bridgemax Fanuc 16i M0120 ######## 0 Yes 120" x 72" 185" x 100" x 50" 3,750 50 52 Table Travels RPM Taper ATC

9329 MACHINING CENTERS, GANTRY TYPE, NC-CNC 1994 Mighty Comet VMC-3000C Mitsubishi Meldas 335MV Good Yes 1994 Mighty Comet VMC-3000C Mitsubishi Meldas 335MV M0120 79,500.00 0 Yes 122" x 47" 121" x 59" x 28" 3,800 50 40 Table Travels RPM Taper ATC

9166 MACHINING CENTERS, GANTRY TYPE, NC-CNC 1998 Nicolas Correa Euro 2000 Fanuc 16iM Very Good Ye 1998 Nicolas Correa Euro 2000 Fanuc 16iM M0120 79,500.00 0 Yes 78.7" x 39.3" 78.7" x 49.21" x 25.5" 10,000 40 24 Table Travels RPM Taper ATC

10246 MACHINING CENTERS, GANTRY TYPE, NC-CNC 1998 Okuma MCV-20A II OSP-7000M Very Good Yes 1998 Okuma MCV-20A II OSP-7000M M0120 ######## 0 Yes 110" x 59.06" 118" x 78.74" x 17.72" 4,000 50 24 Table Travels RPM Taper ATC

7361 MACHINING CENTERS, GANTRY TYPE, NC-CNC 1999 SNK PM-6B Profiler Fanuc 15M Good Yes 133' x 120" Table, 132" Distance Between Columns, Travel of Each Gantry 97', 120' x 120" x 32" Travels, +/- 25° A & B, 7,000 RPM, 50 Taper, 40 HP, Twin Gantry Machine with Three (3) Spindle Each 1999 SNK PM-6B Profiler Fanuc 15M M0120 ######## 0 Yes 133" x 120" 120" x 120" x 32" 7,000 50 Table Travels RPM Taper ATC

9302 MACHINING CENTERS, GANTRY TYPE, NC-CNC 1997 Toshiba MPF-2140 Tosnuc 888 Very Good Yes 1997 Toshiba MPF-2140 Tosnuc 888 M0120 ######## 0 Yes 157.5" x 70.9" 157.5" x 82.7" x 23.6" 12,000 50 30 Table Travels RPM Taper ATC

9801 MACHINING CENTERS, GANTRY TYPE, NC-CNC 1999 Toshiba MPE-2140 Tosnuc 888 Very Good Yes 1999 Toshiba MPE-2140 Tosnuc 888 M0120 ######## 0 Yes 157.5" x 70.9" 177" x 114" x 39" 3,000 50 120 Table Travels RPM Taper ATC

7347 MACHINING CENTERS, HORIZONTAL CNC 2010 Amera-Seiki A-50H Fanuc 18iMB Like New Yes 2010 Amera-Seiki A-50H Fanuc 18iMB M0130 ######## -1 Yes 19.6" x 19.6" 360,000° 6,000 50 60 Pallets Indexing RPM Taper ATC

10390 MACHINING CENTERS, HORIZONTAL CNC 1995 Cincinnati T-30 Acramatic 950 Good Yes 2 - 31.5" x 31.5" Pallets, Full Contouring 4-Axis Pallets, 6,000 RPM, 50 HP, 90 ATC, 600 IPM, Through Spindle Coolant, Chip Conveyor, Spindle Probe, Tool Setting Probe, Automatic Pallet Changer With Load/Unload Station 1995 Cincinnati T-30 Acramatic 950 M0130 -1 Yes 31.5" x 31.5" 360,000° 6,000 50 90 Pallets Indexing RPM Taper ATC

10465 MACHINING CENTERS, HORIZONTAL CNC 1987 Cincinnati 10HC-2500A Acramatic Big Blue Good Yes 1987 Cincinnati 10HC-2500A Acramatic Big Blue M0130 39,500.00 0 Yes 104" x 32" 5° 4,000 45 30 Pallets Indexing RPM Taper ATC

10217 MACHINING CENTERS, HORIZONTAL CNC 1997 Cincinnati Maxim-630 Acramatic 2100 YES 1997 Cincinnati Maxim-630 Acramatic 2100 M0130 ######## -1 On Way 24.8" x 24.8" 360,000° 10,000 50 80 Pallets Indexing RPM Taper ATC

10524 MACHINING CENTERS, HORIZONTAL CNC 1987 Cincinnati 10HC-2500A Acramatic 900 Very Good Yes 1987 Cincinnati 10HC-2500A Acramatic 900 M0130 32,500.00 0 Yes 104" x 31" 0 6,000 50 30 Pallets Indexing RPM Taper ATC

9102 MACHINING CENTERS, HORIZONTAL CNC 1992 Cincinnati Maxim-500 Acramatic 950 Very Good No Two (2) 19.7" x 19.7" Pallets, 360,000° Indexing, 29.5" x 29.5" x 29.5" Travels, 33.5 HP, 7,000 RPM, 50 Taper, 40 ATC, Chip Conveyor, Coolant Through Spindle, Color Graphics, Full Tool Library, High Speed DNC, RS-232 Port, Floppy Drive, Pallet Wash Down, Pallet Wash Down, Renishaw Receiver, Thousands of Dollars In Spare Parts, Two (2) Extra Pallets 1992 Cincinnati Maxim-500 Acramatic 950 M0130 30,000.00 -1 Yes 19.7" x 19.7" 1° 7,000 50 40 Pallets Indexing RPM Taper ATC

9059 MACHINING CENTERS, HORIZONTAL CNC 1995 Cincinnati Maxim-500 Acramatic 950 Good Yes 1995 Cincinnati Maxim-500 Acramatic 950 M0130 -1 On Way 19.7" x 19.7" 360,000° 7,000 50 40 Pallets Indexing RPM Taper ATC

10505 MACHINING CENTERS, HORIZONTAL CNC 1988 Cincinnati 10HC-2500A Fanuc 21iM Very Good Yes 1988 Cincinnati 10HC-2500A Fanuc 21iM M0130 99,000.00 0 Yes 104" x 31" 0 6,000 50 30 Pallets Indexing RPM Taper ATC

9784 MACHINING CENTERS, HORIZONTAL CNC 1997 Daewoo Ace-50H Fanuc 16M Good Yes 1997 Daewoo Ace-50H Fanuc 16M M0130 42,500.00 0 Yes 19.7" x 19.7" 360,000° 5,000 50 60 Pallets Indexing RPM Taper ATC

9783 MACHINING CENTERS, HORIZONTAL CNC 1996 Daewoo Ace-50H Fanuc 16M Good Yes 1996 Daewoo Ace-50H Fanuc 16M M0130 45,000.00 0 Yes 19.7" x 19.7" 1° 6,000 50 60 Pallets Indexing RPM Taper ATC

9320 MACHINING CENTERS, HORIZONTAL CNC 2001 Daewoo DHP-630 Fanuc 16iMB Very Good Yes 2001 Daewoo DHP-630 Fanuc 16iMB M0130 ######## -1 Yes 24.8" x 24.8" 360,000° 6,000 50 60 Pallets Indexing RPM Taper ATC

7936 MACHINING CENTERS, HORIZONTAL CNC 1997 Daewoo Ace H100 Fanuc 15M Good Yes 1997 Daewoo Ace H100 Fanuc 15M M0130 ######## 0 Yes 39.4" x 39.4" 1° 4,500 50 92 Pallets Indexing RPM Taper ATC

7928 MACHINING CENTERS, HORIZONTAL CNC 1996 Daewoo Ace H100 Fanuc 15M Good Yes 39.4" Pallets, 1° Pallet Indexing, 78.70" x 49.70" x 39.40" Travels, 4,500 RPM, 50 Taper, 35 HP, 60 ATC, Coolant Through Spindle (300 psi), Turbo Chip Conveyor, Rigid Tapping, Shower Coolant, Spindle Chiller Unit, Remote Jog Handle, Two Speed Geared Headstock 1996 Daewoo Ace H100 Fanuc 15M M0130 ######## 0 Yes 39.4" x 39.4" 1° 4,500 50 60 Pallets Indexing RPM Taper ATC

9686 MACHINING CENTERS, HORIZONTAL CNC 2004 Fortune H-630 Fanuc 18M Good Yes 2004 Fortune H-630 Fanuc 18M M0130 ######## 0 Yes 24.8" x 24.8" 1° 4,500 50 60 Pallets Indexing RPM Taper ATC

8893 MACHINING CENTERS, HORIZONTAL CNC 2000 Giddings and Lewis HMC-410 Siemens 840D Good Yes 2000 Giddings and Lewis HMC-410 Siemens 840D M0130 ######## 0 Yes 62.9" x 62.9" 360,000° 4,000 50 60 Pallets Indexing RPM Taper ATC

10574 MACHINING CENTERS, HORIZONTAL CNC 2005 Haas EC-1600 Haas 32 BIT Very Good Yes 2005 Haas EC-1600 Haas 32 BIT M0130 ######## 0 Yes 64" x 32" 360,000° 6,000 50 30 Pallets Indexing RPM Taper ATC

10533 MACHINING CENTERS, HORIZONTAL CNC 2008 Haas EC-400 Haas 32 BIT Very Good Yes 2008 Haas EC-400 Haas 32 BIT M0130 ######## 0 Yes 15.75" x 15.75" 360,000° 8,000 40 24 Pallets Indexing RPM Taper ATC

10412 MACHINING CENTERS, HORIZONTAL CNC 2004 Haas EC-400 Haas 32 BIT Very Good Yes 2004 Haas EC-400 Haas 32 BIT M0130 76,000.00 0 Yes 15.75" x 15.75" 1° 12,000 40 40 Pallets Indexing RPM Taper ATC

10185 MACHINING CENTERS, HORIZONTAL CNC 2007 Haas EC-3000 Haas 32 BIT Excellent Yes 2007 Haas EC-3000 Haas 32 BIT M0130 ######## 0 Yes 120" x 40" 6,000 50 30 Pallets Indexing RPM Taper ATC

10165 MACHINING CENTERS, HORIZONTAL CNC 1999 Haas HS-1RP Haas 32 BIT Very Good Yes 1999 Haas HS-1RP Haas 32 BIT M0130 36,500.00 0 Yes 16" x 16" 360,000° 7,500 40 24 Pallets Indexing RPM Taper ATC

10456 MACHINING CENTERS, HORIZONTAL CNC 2004 Haas EC-400 Haas 32 BIT Very Good Yes 2004 Haas EC-400 Haas 32 BIT M0130 95,000.00 0 Yes 15.75" x 15.75" 360,000° 12,000 40 60 Pallets Indexing RPM Taper ATC

10627 MACHINING CENTERS, HORIZONTAL CNC 1996 Haas HS-1RP Haas 32 BIT Good Yes 1996 Haas HS-1RP Haas 32 BIT M0130 38,000.00 -1 Yes 15.7" x 15.7" 360,000° 7,500 40 24 Pallets Indexing RPM Taper ATC

9097 MACHINING CENTERS, HORIZONTAL CNC 2000 Haas HS-2RP Haas 32 BIT Good Yes 2000 Haas HS-2RP Haas 32 BIT M0130 49,500.00 0 Yes 20" x 20" 360,000° 10,000 40 40 Pallets Indexing RPM Taper ATC

10216 MACHINING CENTERS, HORIZONTAL CNC 2006 Haas EC-400 Haas 32 BIT Very Good YES 2006 Haas EC-400 Haas 32 BIT M0130 ######## 0 On Way 15.75" x 15.75" 1° 8,000 40 40 Pallets Indexing RPM Taper ATC

9617 MACHINING CENTERS, HORIZONTAL CNC 1999 Haas HS-1RP Haas 32 BIT Good Yes 1999 Haas HS-1RP Haas 32 BIT M0130 34,500.00 0 Yes 16" x 16" 360,000° 7,500 40 24 Pallets Indexing RPM Taper ATC

7869 MACHINING CENTERS, HORIZONTAL CNC 2000 Haas HS-1RP Haas 32 BIT Very Good Yes 16" x 16" Pallets, 24" x 20" x 22", 10,000 RPM, 40 Taper, 20 HP, 24 ATC, Chip Auger, RS-232 Port, Rigid Tapping, Coolant Through Spindle (300 PSI), Remote Jog Handle, 1 Meg Memory, Two (2) Kurt Vise Towers (8 positions each), Custom Macros, 3.5" Floppy Drive 2000 Haas HS-1RP Haas 32 BIT M0130 58,000.00 -1 Yes 16" x 16" 360,000° 10,000 40 24 Pallets Indexing RPM Taper ATC

7490 MACHINING CENTERS, HORIZONTAL CNC 1998 Hitachi-Seiki HS-630 Seicos Sigma 16M Very Good Yes Two 24.8" Pallets, 360,000° Indexing, 2,640 Lbs Table Load, 33.5" x 31.5" x 33.5" Travels, 10,000 RPM, 50 Taper, 40 HP, 60 ATC, Coolant Through Spindle, Synchronized Tapping, Helical Interpolation, Chip Conveyor, Remote Jog Handle 1998 Hitachi-Seiki HS-630 Seicos Sigma 16M M0130 99,000.00 -1 Yes 24.8" x 24.8" 360,000° 10,000 50 60 Pallets Indexing RPM Taper ATC

9702 MACHINING CENTERS, HORIZONTAL CNC 1985 Hitachi-Seiki HC-400 Fanuc 11M Needs Work Yes 1985 Hitachi-Seiki HC-400 Fanuc 11M M0130 -1 Yes 16" x 16" 1° 6,000 40 50 Pallets Indexing RPM Taper ATC

8094 MACHINING CENTERS, HORIZONTAL CNC 2005 Kia KH-50G Fanuc 18iMB Very Good Yes 19.7" x 19.7" Pallets, Full 4th, 29.9" x 27.8" x 25.6" Travels, 8,000 RPM, 50 Taper, 18.5 HP, 60 ATC, Rigid Tapping, High Pressure Coolant Through Spindle, Chip Conveyor, Remote Jog Handle, Some Tool Holders, Machine Installed in 2007 2005 Kia KH-50G Fanuc 18iMB M0130 ######## -1 Yes 19.7" x 19.7" 360,000° 8,000 50 60 Pallets Indexing RPM Taper ATC

8289 MACHINING CENTERS, HORIZONTAL CNC 1998 Kitamura H-400 Fanuc 15M Very Good Yes 1998 Kitamura H-400 Fanuc 15M M0130 42,000.00 0 Yes 15.7" x 15.7" 360,000° 10,000 40 100 Pallets Indexing RPM Taper ATC

9518 MACHINING CENTERS, HORIZONTAL CNC 1999 Kitamura HX-300 Fanuc 15M Very Good Yes 12" x 12" Pallets, Full 4th, 20.1" x 20.1" x 15.7" Travels, 10,000 RPM, 20 HP, 40 Taper, 40 ATC, 512K Memory, Expanded Macros, Coolant Through Spindle, Geared Head, New Spindle March in 2003, 200 Tool Offsets, Expanded Work Offsets, Low Hours Cutting Aluminum and Plastic 1999 Kitamura HX-300 Fanuc 15M M0130 68,000.00 -1 Yes 12" x 12" 360,000° 10,000 40 40 Pallets Indexing RPM Taper ATC

10173 MACHINING CENTERS, HORIZONTAL CNC 2005 Kitamura HX-630i Fanuc 16iMB Very Good Yes 2005 Kitamura HX-630i Fanuc 16iMB M0130 ######## 0 Yes 24.8" x 24.8" 360,000° 12,000 50 40 Pallets Indexing RPM Taper ATC

9218 MACHINING CENTERS, HORIZONTAL CNC 1998 Kitamura H-400 Fanuc 15M Good Yes 1998 Kitamura H-400 Fanuc 15M M0130 39,500.00 0 Yes 15.7" x 15.7" 360,000° 10,000 40 100 Pallets Indexing RPM Taper ATC

10363 MACHINING CENTERS, HORIZONTAL CNC 2006 Kitamura MyTrunnion 5AP Fanuc 16iMB Excellent Yes 2006 Kitamura MyTrunnion 5AP Fanuc 16iMB M0130 ######## 0 Yes 19.6" x 19.6" 360,000° 20,000 50 50 Pallets Indexing RPM Taper ATC

10313 MACHINING CENTERS, HORIZONTAL CNC 2001 Kitamura HX-400i Fanuc 16iM Good Yes 2001 Kitamura HX-400i Fanuc 16iM M0130 99,500.00 0 Yes 15.7" x 15.7" 360,000° 13,000 40 50 Pallets Indexing RPM Taper ATC

9695 MACHINING CENTERS, HORIZONTAL CNC 1992 Kitamura H-600 Fanuc 15M Good Yes 1992 Kitamura H-600 Fanuc 15M M0130 59,500.00 0 Yes 24.8" x 24.8" 360,000° 5,000 50 60 Pallets Indexing RPM Taper ATC

8326 MACHINING CENTERS, HORIZONTAL CNC 2001 Kiwa KNH-400 Fanuc 18iMA Very Good Yes 15.75" x 15.75" Pallets, 23.62" x 23.62" x 19.68" Travels, 10,000 RPM, 40 Taper, 25 HP, 64 ATC, Full 4th, High Pressure Coolant Through Spindle (1,000 psi), Remote Manual Pulse Generator, Chip Conveyor, Rigid Tapping 2001 Kiwa KNH-400 Fanuc 18iMA M0130 ######## -1 Yes 15.75" x 15.75" 360,000° 10,000 40 64 Pallets Indexing RPM Taper ATC

10360 MACHINING CENTERS, HORIZONTAL CNC 1996 Kuraki KH-80 Fanuc 15M Good Yes 1996 Kuraki KH-80 Fanuc 15M M0130 75,000.00 0 Yes 31.5" x 31.5" 360,000° 6,000 50 40 Pallets Indexing RPM Taper ATC

8889 MACHINING CENTERS, HORIZONTAL CNC 2000 Kuraki KHM-125 Fanuc 16M Very Good Yes 2000 Kuraki KHM-125 Fanuc 16M M0130 ######## 0 Yes 49.2" x 49.2" 360,000° 8,000 50 60 Pallets Indexing RPM Taper ATC

7935 MACHINING CENTERS, HORIZONTAL CNC 1999 Makino MCB-1210 Fanuc 16M Pro3 Very Good Yes 1999 Makino MCB-1210 Fanuc 16M Pro3 M0130 ######## 0 Yes 39.4" x 39.4" 360,000° 15,000 50 60 Pallets Indexing RPM Taper ATC

10292 MACHINING CENTERS, HORIZONTAL CNC 1996 Makino A-55 Fanuc Pro 3 Good Yes 1996 Makino A-55 Fanuc Pro 3 M0130 40,000.00 0 Yes 15.74" x 15.74" 1° 14,000 40 40 Pallets Indexing RPM Taper ATC

10214 MACHINING CENTERS, HORIZONTAL CNC 1999 Makino A-66 Makino Pro 3 Very Good Yes 1999 Makino A-66 Makino Pro 3 M0130 96,500.00 0 Yes 19.69" x 19.69" 1° 14,000 40 40 Pallets Indexing RPM Taper ATC

10146 MACHINING CENTERS, HORIZONTAL CNC 2008 Makino A-82M Fanuc FS310is (Pro 5) Like New Yes 2008 Makino A-82M Fanuc FS310is (Pro 5) M0130 ######## 0 Yes 24.8" x 24.8" 360,000° 8,000 50 137 Pallets Indexing RPM Taper ATC

9272 MACHINING CENTERS, HORIZONTAL CNC 1999 Makino A-66 Fanuc 16iM Very Good Yes 1999 Makino A-66 Fanuc 16iM M0130 99,500.00 0 Yes 19.69" x 19.69" 360,000° 14,000 40 60 Pallets Indexing RPM Taper ATC

9851 MACHINING CENTERS, HORIZONTAL CNC 1995 Makino MC-98 Fanuc Pro 3 Good Yes 1995 Makino MC-98 Fanuc Pro 3 M0130 ######## 0 Yes 24.8" x 24.8" 360,000° 15,000 50 60 Pallets Indexing RPM Taper ATC

10516 MACHINING CENTERS, HORIZONTAL CNC 2001 Makino A-88 Fanuc Pro 3 Good Yes 2001 Makino A-88 Fanuc Pro 3 M0130 ######## 0 Yes 24.81" x 24.81" 1° 35.4" x 31.5" x 38.2 50 132 Pallets Indexing RPM Taper ATC

9404 MACHINING CENTERS, HORIZONTAL CNC 1992 Makino A-55 Fanuc Pro 3 Very Good Yes 1992 Makino A-55 Fanuc Pro 3 M0130 39,500.00 0 Yes 15.74" x 15.74" 360,000° 12,000 40 40 Pallets Indexing RPM Taper ATC

9962 MACHINING CENTERS, HORIZONTAL CNC 2001 Makino A-55 E Fanuc Pro 3 Good Yes 2001 Makino A-55 E Fanuc Pro 3 M0130 99,500.00 0 Yes 15.74" x 15.74" 360,000° 14,000 63 40 Pallets Indexing RPM Taper ATC

8603 MACHINING CENTERS, HORIZONTAL CNC 2002 Makino A-66 Fanuc 16iM Good Yes 2002 Makino A-66 Fanuc 16iM M0130 79,500.00 0 Yes 19.69" x 19.69" 360,000° 14,000 63 40 Pallets Indexing RPM Taper ATC

9362 MACHINING CENTERS, HORIZONTAL CNC 1999 Makino MCB-1210 Fanuc 16M Pro3 Good Yes 1999 Makino MCB-1210 Fanuc 16M Pro3 M0130 ######## -1 Yes 39.4" x 39.4" 360,000° 15,000 50 60 Pallets Indexing RPM Taper ATC

9976 MACHINING CENTERS, HORIZONTAL CNC 1987 Matsuura MC-900H 63 Fanuc 11M Very Good Yes 1987 Matsuura MC-900H 63 Fanuc 11M M0130 38,000.00 -1 Yes 23.62" x 23.62" 360,000° 4,500 50 100 Pallets Indexing RPM Taper ATC

9975 MACHINING CENTERS, HORIZONTAL CNC 1988 Matsuura MC-900H 63 Fanuc 11M Very Good Yes 1988 Matsuura MC-900H 63 Fanuc 11M M0130 38,000.00 -1 Yes 23.62" x 23.62" 360,000° 4,500 50 50 Pallets Indexing RPM Taper ATC

9974 MACHINING CENTERS, HORIZONTAL CNC 1988 Matsuura MC-900H 63 Fanuc 11M Very Good Yes 1988 Matsuura MC-900H 63 Fanuc 11M M0130 38,000.00 -1 Yes 23.62" x 23.62" 360,000° 4,500 50 50 Pallets Indexing RPM Taper ATC

9386 MACHINING CENTERS, HORIZONTAL CNC 1987 Mazak YMS-H25Q Mazatrol M-2 Very Good Yes 1987 Mazak YMS-H25Q Mazatrol M-2 M0130 ######## 0 Yes 118.11" x 64.17" 360,000° 2,600 50 80 Pallets Indexing RPM Taper ATC

10110 MACHINING CENTERS, HORIZONTAL CNC 2000 Mazak FH-8800 Mazatrol Fusion 640M Good Yes 2000 Mazak FH-8800 Mazatrol Fusion 640M M0130 ######## -1 On Way 31.5" x 31.5" 1° 7,000 50 80 Pallets Indexing RPM Taper ATC

9318 MACHINING CENTERS, HORIZONTAL CNC 1990 Mazak H-400 / 40N Mazatrol M-32 Very Good Yes 15.75" X 15.75" Pallets, 1° Indexing, 22" x 18" x 20", 7,000 RPM, 40 Taper, 12 HP, 30 ATC, Coolant Through Spindle, Chip Conveyor, Chiller Unit, RS-232C Port 1990 Mazak H-400 / 40N Mazatrol M-32 M0130 26,000.00 0 Yes 15.75" x 15.75" 1° 7,000 40 30 Pallets Indexing RPM Taper ATC

10257 MACHINING CENTERS, HORIZONTAL CNC 1997 Mazak FH-680 Mazatrol M-Plus Very Good Yes 1997 Mazak FH-680 Mazatrol M-Plus M0130 ######## 0 Yes 24.8" x 24.8" 360,000° 10,000 50 80 Pallets Indexing RPM Taper ATC

9074 MACHINING CENTERS, HORIZONTAL CNC 2001 Mazak FH-4800 Mazatrol Fusion 640M Good Yes 2001 Mazak FH-4800 Mazatrol Fusion 640M M0130 ######## 0 Yes 15.75" x 15.75" 1° 12,000 40 40 Pallets Indexing RPM Taper ATC

10416 MACHINING CENTERS, HORIZONTAL CNC 2001 Mazak FH-4800 Mazatrol Fusion 640M Good Yes 2001 Mazak FH-4800 Mazatrol Fusion 640M M0130 ######## 0 Yes 15.75" x 15.75" 1° 25,000 40 80 Pallets Indexing RPM Taper ATC

10418 MACHINING CENTERS, HORIZONTAL CNC 2002 Mazak PFH-4800 Mazatrol Fusion 640M Good Yes 2002 Mazak PFH-4800 Mazatrol Fusion 640M M0130 ######## 0 Yes 15.75" x 15.75" 360,000° 12,000 40 40 Pallets Indexing RPM Taper ATC

9742 MACHINING CENTERS, HORIZONTAL CNC 1986 Mazak H-400 / 40N Mazatrol M-2 Good Yes 1986 Mazak H-400 / 40N Mazatrol M-2 M0130 19,500.00 -1 On Way 15.75" x 15.75" 1° 7,000 40 30 Pallets Indexing RPM Taper ATC

10142 MACHINING CENTERS, HORIZONTAL CNC 2004 Mazak PFH-5800 Mazatrol Fusion 640 M Very Good Yes 2004 Mazak PFH-5800 Mazatrol Fusion 640 M M0130 ######## 0 Yes 19.68" x 19.68" 1° 12,000 40 80 Pallets Indexing RPM Taper ATC

10232 MACHINING CENTERS, HORIZONTAL CNC 1996 Mitsubishi M-H100C Mitsubishi 520M Very Good Yes 1996 Mitsubishi M-H100C Mitsubishi 520M M0130 ######## 0 Yes 39.4" x 39.4" 360,000° 4,000 50 80 Pallets Indexing RPM Taper ATC

9980 MACHINING CENTERS, HORIZONTAL CNC 1994 Mitsubishi M-H80D Mitsubishi 300 Good Yes 1994 Mitsubishi M-H80D Mitsubishi 300 M0130 75,000.00 -1 Yes 31.5" x 31.5" 360,000° 4,000 50 80 Pallets Indexing RPM Taper ATC

9865 MACHINING CENTERS, HORIZONTAL CNC 1992 Mitsui-Seiki HT-3A Fanuc 15M Good Yes 1992 Mitsui-Seiki HT-3A Fanuc 15M M0130 22,500.00 -1 Yes 15.75" x 15.75" 360,000° 12,000 40 90 Pallets Indexing RPM Taper ATC

10357 MACHINING CENTERS, HORIZONTAL CNC 1993 Mitsui-Seiki JIDIC-H6C Fanuc 15M Very Good Yes 1993 Mitsui-Seiki JIDIC-H6C Fanuc 15M M0130 ######## -1 Yes 31.5" x 31.5" 360,000° 3,150 50 120 Pallets Indexing RPM Taper ATC

8964 MACHINING CENTERS, HORIZONTAL CNC 2000 Mitsui-Seiki HU-63A Fanuc 16M Very Good Yes 2000 Mitsui-Seiki HU-63A Fanuc 16M M0130 89,500.00 0 Yes 24.8" x 24.8" 1° 10,000 50 90 Pallets Indexing RPM Taper ATC

9406 MACHINING CENTERS, HORIZONTAL CNC 1996 Mitsui-Seiki HT-3A Fanuc 15MA Very Good Yes 1996 Mitsui-Seiki HT-3A Fanuc 15MA M0130 49,500.00 0 Yes 15.75" x 15.75" 360,000° 20,000 40 90 Pallets Indexing RPM Taper ATC

8982 MACHINING CENTERS, HORIZONTAL CNC 1984 Mitsui-Seiki HR-7A Fanuc 6MB Good Yes 1984 Mitsui-Seiki HR-7A Fanuc 6MB M0130 59,900.00 -1 Yes 51.2" x 51.2" 360,000° 3,150 50 60 Pallets Indexing RPM Taper ATC

10356 MACHINING CENTERS, HORIZONTAL CNC 1999 Mitsui-Seiki HJ-100A Fanuc 15M Very Good Yes 1999 Mitsui-Seiki HJ-100A Fanuc 15M M0130 ######## -1 Yes 31.5" x 31.5" 360,000° 8,000 50 240 Pallets Indexing RPM Taper ATC

10354 MACHINING CENTERS, HORIZONTAL CNC 1996 Mori-Seiki SH-50 Fanuc 16M Very Good Yes 1996 Mori-Seiki SH-50 Fanuc 16M M0130 60,000.00 0 Yes 19.7" x 19.7" 1° 12,000 40 60 Pallets Indexing RPM Taper ATC

8956 MACHINING CENTERS, HORIZONTAL CNC 1987 Mori-Seiki MH-50 Fanuc 18M Needs Repair Yes 1987 Mori-Seiki MH-50 Fanuc 18M M0130 -1 Yes 19.7" x 19.7" 360,000° 6,000 50 40 Pallets Indexing RPM Taper ATC

10592 MACHINING CENTERS, HORIZONTAL CNC 1994 Mori-Seiki MH-63 Fanuc 16M Good Yes 1994 Mori-Seiki MH-63 Fanuc 16M M0130 ######## 0 Yes 24.8" x 24.8" 1° 6,000 50 60 Pallets Indexing RPM Taper ATC

10413 MACHINING CENTERS, HORIZONTAL CNC 2008 Mori-Seiki NH-4000 DCG Mori-Seiki MSG-501 Very Good Yes 2008 Mori-Seiki NH-4000 DCG Mori-Seiki MSG-501 M0130 ######## 0 Yes 15.75" x 15.75" 360,000° 14,000 40 120 Pallets Indexing RPM Taper ATC

10280 MACHINING CENTERS, HORIZONTAL CNC 1995 Mori-Seiki SH-50 Fanuc 16M Good Yes 1995 Mori-Seiki SH-50 Fanuc 16M M0130 69,500.00 0 Yes 19.7" x 19.7" 1° 12,000 40 40 Pallets Indexing RPM Taper ATC

9411 MACHINING CENTERS, HORIZONTAL CNC 1995 Mori-Seiki SH-50 Mitsubishi MSC-516 Good Yes 1995 Mori-Seiki SH-50 Mitsubishi MSC-516 M0130 55,000.00 0 Yes 19.7" x 19.7" 1° 12,000 40 40 Pallets Indexing RPM Taper ATC

10106 MACHINING CENTERS, HORIZONTAL CNC 1996 Mori-Seiki SH-63 Fanuc 16M Good Yes 24.8" x 24.8" Pallets, 33.07" x 29.92" x 33.07" Travels, 15,000 RPM, 50 Taper, 40 HP, 120 ATC, Chip Conveyor, Shower Coolant 1996 Mori-Seiki SH-63 Fanuc 16M M0130 ######## -1 Yes 24.8" x 24.8" 1° 15,000 50 120 Pallets Indexing RPM Taper ATC

9970 MACHINING CENTERS, HORIZONTAL CNC 1997 Mori-Seiki SH-63 Fanuc 160iM Good Yes 1997 Mori-Seiki SH-63 Fanuc 160iM M0130 65,000.00 0 Yes 24.8" x 24.8" 1° 10,000 50 60 Pallets Indexing RPM Taper ATC

10439 MACHINING CENTERS, HORIZONTAL CNC 2000 Mori-Seiki SH-503 / 40 Moric MSG-502 Very Good Yes 2000 Mori-Seiki SH-503 / 40 Moric MSG-502 M0130 ######## 0 Yes 19.7" x 19.7" 360,000° 12,000 40 60 Pallets Indexing RPM Taper ATC

10281 MACHINING CENTERS, HORIZONTAL CNC 1996 Niigata SPN-50 Fanuc 16M Good Yes 1996 Niigata SPN-50 Fanuc 16M M0130 67,500.00 0 Yes 19.7" x 19.7" 360,000° 12,000 50 178 Pallets Indexing RPM Taper ATC

9410 MACHINING CENTERS, HORIZONTAL CNC 1997 Niigata HN-50C Fanuc 15M Good Yes 1997 Niigata HN-50C Fanuc 15M M0130 69,500.00 0 No 19.7" x 19.7" 1° 6,500 50 120 Pallets Indexing RPM Taper ATC

8959 MACHINING CENTERS, HORIZONTAL CNC 1995 Niigata SPN-50 Fanuc 16M Very Good Yes 1995 Niigata SPN-50 Fanuc 16M M0130 79,500.00 -1 Yes 19.7" x 19.7" 360,000° 12,000 50 178 Pallets Indexing RPM Taper ATC

8017 MACHINING CENTERS, HORIZONTAL CNC 1997 Niigata SPN-40 Fanuc 16iM Very Good Yes 1997 Niigata SPN-40 Fanuc 16iM M0130 49,500.00 0 Yes 15.7" x 15.7" 1° 12,000 40 60 Pallets Indexing RPM Taper ATC

9711 MACHINING CENTERS, HORIZONTAL CNC 2000 Niigata HN-63C Fanuc 16iM Very Good Yes 2000 Niigata HN-63C Fanuc 16iM M0130 ######## 0 Yes 24.8" X 24.8" 360,000° 6,500 50 60 Pallets Indexing RPM Taper ATC

8983 MACHINING CENTERS, HORIZONTAL CNC 2000 Niigata HN-80C Fanuc 18iM Very Good Yes 2000 Niigata HN-80C Fanuc 18iM M0130 ######## 0 Yes 31.5" x 31.5" 360,000° 12,000 50 126 Pallets Indexing RPM Taper ATC

10336 MACHINING CENTERS, HORIZONTAL CNC 1993 Niigata HN-80C Fanuc 15MA Good Yes 1993 Niigata HN-80C Fanuc 15MA M0130 ######## 0 Yes 31.5" x 31.5" 360,000° 6,000 50 240 Pallets Indexing RPM Taper ATC

9405 MACHINING CENTERS, HORIZONTAL CNC 2003 OKK HM-80S Fanuc 160iM Very Good Yes 2003 OKK HM-80S Fanuc 160iM M0130 ######## 0 Yes 31.49" x 31.49" 360,000° 12,000 50 116 Pallets Indexing RPM Taper ATC

9300 MACHINING CENTERS, HORIZONTAL CNC 2001 OKK HM-60 Fanuc 16i Good Yes 2001 OKK HM-60 Fanuc 16i M0130 99,500.00 0 Yes 23.6" x 23.6" 360,000° 8,000 50 40 Pallets Indexing RPM Taper ATC

9274 MACHINING CENTERS, HORIZONTAL CNC 1997 OKK HM-40 OKK NeoMatic 530 Very Good Yes 1997 OKK HM-40 OKK NeoMatic 530 M0130 59,000.00 0 Yes 15.75" x 15.75" 1° 10,000 40 40 Pallets Indexing RPM Taper ATC

10438 MACHINING CENTERS, HORIZONTAL CNC 1999 OKK HN-80C Fanuc 16iM Good Yes 1999 OKK HN-80C Fanuc 16iM M0130 ######## 0 Yes 31.5" X 31.5" 1° 8,000 50 40 Pallets Indexing RPM Taper ATC

9778 MACHINING CENTERS, HORIZONTAL CNC 1999 OKK HM-80S Fanuc 160iM Good Yes 1999 OKK HM-80S Fanuc 160iM M0130 ######## 0 Yes 31.49" x 31.49" 1° 12,000 50 40 Pallets Indexing RPM Taper ATC

10500 MACHINING CENTERS, HORIZONTAL CNC 1999 OKK HM-80S Fanuc 16iM Good Yes 1999 OKK HM-80S Fanuc 16iM M0130 ######## 0 Yes 31.49" X 31.49" 1° 8,000 40 40 Pallets Indexing RPM Taper ATC

8181 MACHINING CENTERS, HORIZONTAL CNC 2007 OKK HP-500 S Fanuc I80i SMB Excellent Yes 2007 OKK HP-500 S Fanuc I80i SMB M0130 ######## 0 Yes 19.69" x 19.69" 360,000° 15,000 40 162 Pallets Indexing RPM Taper ATC

9979 MACHINING CENTERS, HORIZONTAL CNC 1994 Okuma MC-500H OSP-5020M Good Yes 1994 Okuma MC-500H OSP-5020M M0130 25,000.00 -1 Yes 19.69" x 19.69" 360,000° 5,000 50 40 Pallets Indexing RPM Taper ATC

8323 MACHINING CENTERS, HORIZONTAL CNC 2001 Okuma and Howa Millac 550H Fanuc 16iM Very Good Yes 19.68" x 19.68" Pallets, 31.5" x 31.5" x 27.5" Travels, 10,000 RPM, 50 Taper, 40 HP, 60 ATC, Full 4th, High Pressure Coolant Through Spindle (1,000 psi), Hydraulics Plumbed To Each Pallet For Work Holding Fixtures, Chip Conveyor, 5,500 Cutting Hours, Cutting Only Aluminum 2001 Okuma and Howa Millac 550H Fanuc 16iM M0130 ######## -1 Yes 19.68" x 19.68" 360,000° 10,000 50 60 Pallets Indexing RPM Taper ATC

9408 MACHINING CENTERS, HORIZONTAL CNC 1997 Saeilo Mach 4 Fanuc 21iM Very Good Yes 1997 Saeilo Mach 4 Fanuc 21iM M0130 24,500.00 0 Yes 15.7" x 15.7" 360,000° 8,000 40 20 Pallets Indexing RPM Taper ATC

10006 MACHINING CENTERS, HORIZONTAL CNC 1989 Scharmann Salon 2 Yes 1989 Scharmann Salon 2 M0130 -1 On Way 31.5" x 24.6" 360,000° 3,500 50 80 Pallets Indexing RPM Taper ATC

9111 MACHINING CENTERS, HORIZONTAL CNC 2007 SNK HPS-120B-5 Fanuc 31iA-5 Excellent Yes 2007 SNK HPS-120B-5 Fanuc 31iA-5 M0130 ######## 0 Yes 120" x 48" 360,000° 15,000 50 60 Pallets Indexing RPM Taper ATC

9573 MACHINING CENTERS, HORIZONTAL CNC 2001 SNK HPS-120B-5 Fanuc 15iM Very Good Yes 2001 SNK HPS-120B-5 Fanuc 15iM M0130 ######## 0 Yes 120" x 48" 12,000 50 40 Pallets Indexing RPM Taper ATC

9273 MACHINING CENTERS, HORIZONTAL CNC 1998 Starrag-Heckert CWK-400 Fanuc 16iM Very Good Yes 1998 Starrag-Heckert CWK-400 Fanuc 16iM M0130 99,500.00 0 Yes 16" x 16" 360,000° 10,000 40 60 Pallets Indexing RPM Taper ATC

9978 MACHINING CENTERS, HORIZONTAL CNC 1984 Toshiba BMC-80E Tosnuc 600M Good Yes 1984 Toshiba BMC-80E Tosnuc 600M M0130 65,000.00 -1 Yes 31.5" x 31.5" 360,000° 5,000 50 60 Pallets Indexing RPM Taper ATC

10344 MACHINING CENTERS, HORIZONTAL CNC 2001 Toyoda FA-550 II Fanuc 16i Good Yes 2001 Toyoda FA-550 II Fanuc 16i M0130 79,500.00 0 Yes 21.65" x 21.65" 1° 6,000 50 120 Pallets Indexing RPM Taper ATC

10461 MACHINING CENTERS, HORIZONTAL CNC 2008 Toyoda FA-630 RGV Fanuc 16iMB Excellent Yes 2008 Toyoda FA-630 RGV Fanuc 16iMB M0130 ######## 0 Yes 24.8" x 24.8" 360,000° 6,000 50 190 Pallets Indexing RPM Taper ATC

9634 MACHINING CENTERS, HORIZONTAL CNC 1997 Toyoda FA-550 II Fanuc 15MB Very Good Yes Six (6) 21.65" Pallet, Full 4th, 29.52" x 29.52" x 23.62" Travels, 6,000 RPM, 50 Taper, 40 HP, 120 ATC, Coolant Through Spindle, Helical Interpolation, Rigid Tapping, Chip Conveyor, Toyoda Touch Sensor Function, Barnes Kleenal Chip Filter, Program Data Input 1997 Toyoda FA-550 II Fanuc 15MB M0130 ######## 0 Yes 21.65" x 21.65" 360,000° 6,000 50 120 Pallets Indexing RPM Taper ATC

8629 MACHINING CENTERS, VERTICAL, CNC 2009 Amera-Seiki VX5-3 Fanuc 31iMA New No 2009 Amera-Seiki VX5-3 Fanuc 31iMA M0185 ######## -1 Yes 128" x 31.5" 118" x 39.4" x 29.5" 12,000 50 32 Table Travels RPM Taper ATC

7990 MACHINING CENTERS, VERTICAL, CNC 2010 Amera-Seiki A-5 Fanuc OiMC New Yes 2010 Amera-Seiki A-5 Fanuc OiMC M0185 ######## -1 Yes 67" x 32" 63" x 31.5" x 27.5" 6,000 50 32 Table Travels RPM Taper ATC

7345 MACHINING CENTERS, VERTICAL, CNC 2006 Amera-Seiki A-1 APC Mitsubishi 64SM Like New Yes 2006 Amera-Seiki A-1 APC Mitsubishi 64SM M0185 56,000.00 -1 Yes 22" x 15.75" 20.15" x 14.20" x 17.7" 10,000 30 21 Table Travels RPM Taper ATC

10485 MACHINING CENTERS, VERTICAL, CNC 2005 Amera-Seiki A-4 Fanuc 21iMB Very Good Yes 2005 Amera-Seiki A-4 Fanuc 21iMB M0185 69,900.00 0 Yes 44" x 22" 51" x 27.5" x 28" 8,000 40 25 Table Travels RPM Taper ATC

10582 MACHINING CENTERS, VERTICAL, CNC 2008 Amera-Seiki A-3 Fanuc OiMC Like New Yes 2008 Amera-Seiki A-3 Fanuc OiMC M0185 74,500.00 0 Yes 44" x 22" 43" x 22" x 22" 12,000 40 24 Table Travels RPM Taper ATC

9539 MACHINING CENTERS, VERTICAL, CNC 1998 Bostomatic BD-405 Bostomatic MDSI Control Very Good Yes 1998 Bostomatic BD-405 Bostomatic MDSI Control M0185 60,000.00 0 Yes 48" x 14" 20" x 9" x 15" 10,000 30 15 Table Travels RPM Taper ATC

7721 MACHINING CENTERS, VERTICAL, CNC 1998 Bostomatic 605 Bostomatic BDC-3200X Good Yes 1998 Bostomatic 605 Bostomatic BDC-3200X M0185 ######## 0 Yes 47.24" x 20.08" 40.10" x 22.05" x 22.05" 8,000 63 15 Table Travels RPM Taper ATC

9540 MACHINING CENTERS, VERTICAL, CNC 1998 Bostomatic BD-505 Bostomatic BDC-3200X Very Good Yes 1998 Bostomatic BD-505 Bostomatic BDC-3200X M0185 ######## 0 Yes 76" x 16" 40" x 12.5" x 17" 10,000 63 18 Table Travels RPM Taper ATC

8044 MACHINING CENTERS, VERTICAL, CNC 1990 Butler Elgamill HE 28363 Heidenhain 355 Good Yes 315" x 32" Table, 244" x 65" x 38" Travels, A-Axis Travel 130,000°, B-Axis Travel 360,000°, 3,000 RPM, 50 Taper, 29.5 HP, 40 ATC, Chip Conveyor, Full CNC Controlled Swivel Head, Power Draw Bar 1990 Butler Elgamill HE 28363 Heidenhain 355 M0185 ######## -1 Yes 315" x 32" 244" x 65" x 38" 3,000 50 40 Table Travels RPM Taper ATC

7566 MACHINING CENTERS, VERTICAL, CNC 1994 Cincinnati Sabre-1000 Acramatic 850 SX Good Yes 44" x 20" Table, 40" x 20" x 22", 8,000 RPM, 40 Taper, 21 ATC, 945 IPM 1994 Cincinnati Sabre-1000 Acramatic 850 SX M0185 24,500.00 0 Yes 44" x 20" 40" x 20" x 22" 8,000 40 21 Table Travels RPM Taper ATC

9918 MACHINING CENTERS, VERTICAL, CNC 1998 Cincinnati Sabre-1500 Acramatic 2100 Good Yes 1998 Cincinnati Sabre-1500 Acramatic 2100 M0185 28,000.00 -1 Yes 64" x 30" 60" x 30" x 32" 8,000 40 42 Table Travels RPM Taper ATC

8761 MACHINING CENTERS, VERTICAL, CNC 1996 Cincinnati Sabre-1500 Acramatic 2100 Very Good Yes 1996 Cincinnati Sabre-1500 Acramatic 2100 M0185 39,500.00 0 Yes 64" x 30" 60" x 30" x 32" 8,000 40 42 Table Travels RPM Taper ATC

9568 MACHINING CENTERS, VERTICAL, CNC 1996 Cincinnati Sabre-1500 Acramatic 2100 Very Good Yes 1996 Cincinnati Sabre-1500 Acramatic 2100 M0185 34,900.00 0 Yes 64" x 30" 60" x 30" x 32" 10,000 40 21 Table Travels RPM Taper ATC

7567 MACHINING CENTERS, VERTICAL, CNC 1991 Cincinnati Sabre-1250 Acramatic 850 SX Good Yes 1991 Cincinnati Sabre-1250 Acramatic 850 SX M0185 39,500.00 0 NO 54" x 26" 49.2" x 25.6" x 25.6" 8,000 40 21 Table Travels RPM Taper ATC

9016 MACHINING CENTERS, VERTICAL, CNC 2000 Cincinnati Lancer V-5 2000 Acramatic 2100 Very Good Yes 2000 Cincinnati Lancer V-5 2000 Acramatic 2100 M0185 ######## 0 Yes 90" x 30.1" 80" x 30" x 30" 15,000 63 21 Table Travels RPM Taper ATC

9445 MACHINING CENTERS, VERTICAL, CNC 1993 Cincinnati Sabre-750 Acramatic 850 SX Needs Minor Repair No 34" x 20" Table, 8,000 RPM, 15 HP, 40 Taper, 21 ATC, Coolant Through Spindle, Rigid Tapping, High Torque Carrier, Manuals, Needs New Keyboard 1993 Cincinnati Sabre-750 Acramatic 850 SX M0185 8,000.00 -1 Yes 34" x 20" 29.94" x 20.07" x 22.05" 5,000 40 21 Table Travels RPM Taper ATC

9204 MACHINING CENTERS, VERTICAL, CNC 1985/06 Cincinnati 20V-80 Centroid M 400 Very Good Yes 84.05" x 29.92" Table, 78.74" x 29.94" x 24" Travels, +/- 25° A / B Travels, 3,600 RPM, 50 Taper, 25 HP, Coolant System, Full Five Axis Control, Machine Retrofitted With New Servos and Centroid Control in 2007 1985/06 Cincinnati 20V-80 Centroid M 400 M0185 ######## -1 On Way 84.05"x 29.92" 78.74" x 29.94" x 24" 3,600 50 Table Travels RPM Taper ATC

9203 MACHINING CENTERS, VERTICAL, CNC 1989/2007 Cincinnati 20V-120 Centroid M 400 Very Good Yes 122" x 29.92" Table, 120" x 30" x 24" Travels, +/- 29° A / B Travels, 3,600 RPM, 50 Taper, 25 HP, Coolant System, Full Five Axis Control, Machine Retrofitted With New Servos and Centroid Control in 2007 1989/2007 Cincinnati 20V-120 Centroid M 400 M0185 ######## -1 Yes 122" x 29.92" 120" x 30" x 24" 3,600 50 Table Travels RPM Taper ATC

9446 MACHINING CENTERS, VERTICAL, CNC 1995 Cincinnati Arrow-500 Acramatic Series F Needs Minor Repair No 27.5" x 20.5" Table, 20" x 20" x 20" Travels, 6,000 RPM, 15 HP, 40 Taper, 21 ATC, RS-232 Port, Manuals, Rigid Tapping, Needs New Power Supply 1995 Cincinnati Arrow-500 Acramatic Series F M0185 8,000.00 -1 Yes 27.5" x 20.5" 20.07" x 20.07" x 20.07" 6,000 40 21 Table Travels RPM Taper ATC

10449 MACHINING CENTERS, VERTICAL, CNC 2005 Daewoo DMV-5025 Fanuc 21iM Very Good Yes 2005 Daewoo DMV-5025 Fanuc 21iM M0185 75,000.00 -1 Yes 55.1" x 25.6" 51" x 25.5" x 24.6" 12,000 40 24 Table Travels RPM Taper ATC

10542 MACHINING CENTERS, VERTICAL, CNC 2005 Daewoo DMV-3016 LD Fanuc 0iMB Very Good Yes 2005 Daewoo DMV-3016 LD Fanuc 0iMB M0185 49,900.00 0 Yes 36.2" x 16.9" 30" x 16.1" 20.1" 8,000 40 20 Table Travels RPM Taper ATC

10419 MACHINING CENTERS, VERTICAL, CNC 1990 Dah Lih MCV-2100 Fanuc 11M Good Yes 1990 Dah Lih MCV-2100 Fanuc 11M M0185 26,500.00 -1 On Way 90.5" x 31.5" 82.7" x 33.5" x 29.9" 3,500 50 32 Table Travels RPM Taper ATC

8760 MACHINING CENTERS, VERTICAL, CNC 2001 Enshu EV-650 Yasnac J-300M Excellent Yes 78.7" x 25.6" Table, 63" x 25.6" x 25.6" Travels, 6,000 RPM, 20 HP, 50 Taper, 30 ATC, High Speed Milling Option, Chip Conveyor, DNC Port, Tool Life Management, Remote Jog Handle, Tool Length Measurement, 4th Axis Ready 2001 Enshu EV-650 Yasnac J-300M M0185 99,500.00 0 Yes 78.7" x 25.6" 63" x 26.6" x 26" 6,000 50 30 Table Travels RPM Taper ATC

10378 MACHINING CENTERS, VERTICAL, CNC 2006 Fadal VMC-4020 HT Fadal Multi-Processor CNC Very Good Yes 47" x 20" Table, 40" x 20" x 28" Travels, 10,000 RPM, 40 Taper, 22.5 HP, 30 ATC, Rigid Tapping, High Torque, Graphics, 422 K Memory, Cool Power 2006 Fadal VMC-4020 HT Fadal Multi-Processor CNC M0185 51,500.00 0 Yes 47" x 20" 40" x 20" x 20" 10,000 40 24 Table Travels RPM Taper ATC

10063 MACHINING CENTERS, VERTICAL, CNC 2004 Fadal VMC-8030 HT Fadal 32MP CNC Good Yes 82.5" x 30" Table, 80" x 30" x 30" Travels, 10,000 RPM, 22.5 HP, 40 Taper, 21 ATC, Coolant Through Spindle, Rigid Tapping, Remote Jog Handle, High Torque Motor, Coolant System, Chip Conveyor 2004 Fadal VMC-8030 HT Fadal 32MP CNC M0185 74,500.00 0 Yes 82.5" x 30" 80" x 30" x 30" 10,000 40 21 Table Travels RPM Taper ATC

10623 MACHINING CENTERS, VERTICAL, CNC 2007 Fadal VMC-4020 FX Fanuc OiMC Very Good Yes 2007 Fadal VMC-4020 FX Fanuc OiMC M0185 69,900.00 0 Yes 47.94" x 20" 40" x 20" x 28" 10,000 40 21 Table Travels RPM Taper ATC

10606 MACHINING CENTERS, VERTICAL, CNC 1997 Fadal VMC-8030 HT Fadal 88HS Very Good Yes 82.5" x 30" Table, 80" x 30" x 30" Travels, 10,000 RPM, 40 Taper, 22.5 HP, 21 ATC, Coolant System, High Torque, Coolant System, Remote Jog Handle 1997 Fadal VMC-8030 HT Fadal 88HS M0185 86,500.00 0 Yes 82.5" x 30" 80" x 30" x 30" 10,000 40 21 Table Travels RPM Taper ATC

10601 MACHINING CENTERS, VERTICAL, CNC 1997 Fadal VMC-6030 HT Fadal 88HS Good Yes 1997 Fadal VMC-6030 HT Fadal 88HS M0185 39,500.00 0 Yes 62.5" x 30" 60" x 30" x 30" 10,000 40 21 Table Travels RPM Taper ATC

9014 MACHINING CENTERS, VERTICAL, CNC 1999 Fadal VMC-6030 Fadal 32MP CNC Good Yes 1999 Fadal VMC-6030 Fadal 32MP CNC M0185 54,900.00 0 Yes 62.5" x 30" 60" x 30" x 30" 10,000 40 30 Table Travels RPM Taper ATC

10562 MACHINING CENTERS, VERTICAL, CNC 1996 Fadal VMC-15 XT Fadal 88HS Good Yes 1996 Fadal VMC-15 XT Fadal 88HS M0185 0 Yes 38.5" x 16" 30" x 16" x 28" 7,500 40 15 Table Travels RPM Taper ATC

8884 MACHINING CENTERS, VERTICAL, CNC 2004 Fadal VMC-8030 Fadal 32MP CNC Very Good Yes 82.5" x 30" Table, 80" x 30" x 30" Travels, 10,000 RPM, 40 Taper, 22.5 HP, 24 Side Mount ATC, Rigid Tapping, RS-232 Port, Coolant System, 8 MB Expanded Memory, Tsudokoma RN-320R Rotary Table With Tailstock, Remote Jog Handle, New Spindle, 7,500 Power On Hours 2004 Fadal VMC-8030 Fadal 32MP CNC M0185 95,000.00 -1 Yes 82.5" x 30" 80" x 30" x 30" 10,000 40 24 Table Travels RPM Taper ATC

9739 MACHINING CENTERS, VERTICAL, CNC 1998 Fadal VMC-5020A Fadal 88HS Good Yes 1998 Fadal VMC-5020A Fadal 88HS M0185 34,500.00 0 Yes 58" x 20" 50" x 20" x 28" 7,500 40 21 Table Travels RPM Taper ATC

9748 MACHINING CENTERS, VERTICAL, CNC 1986 Fadal VMC-4020 Fadal 88HS Good Yes 1986 Fadal VMC-4020 Fadal 88HS M0185 18,500.00 -1 Yes 47.94" x 20" 40" x 20" x 18" 10,000 40 21 Table Travels RPM Taper ATC

10430 MACHINING CENTERS, VERTICAL, CNC 2007 Fadal VMC-4020 HT Fanuc 18i Very Good Yes 47" x 20" Table, 40" x 20" x 28" Travels, 10,000 RPM, 40 Taper, 22.5 HP, 24 ATC, Rigid Tapping, High Torque, Coolant System, Cool Power, Extended Z-Travel 2007 Fadal VMC-4020 HT Fanuc 18i M0185 59,900.00 0 Yes 47" x 20" 40" x 20" x 28" 10,000 40 24 Table Travels RPM Taper ATC

10410 MACHINING CENTERS, VERTICAL, CNC 1993 Fadal VMC-6030 HT Fadal 88HS Good Yes 1993 Fadal VMC-6030 HT Fadal 88HS M0185 34,500.00 0 Yes 62.5" x 30" 60" x 30" x 30" 10,000 40 21 Table Travels RPM Taper ATC

10163 MACHINING CENTERS, VERTICAL, CNC 1996 Fadal VMC-15 XT Fadal 88HS Very Good Yes 1996 Fadal VMC-15 XT Fadal 88HS M0185 19,500.00 0 Yes 38.5" x 16" 30" x 16" x 28" 7,500 40 21 Table Travels RPM Taper ATC

10551 MACHINING CENTERS, VERTICAL, CNC 1994 Fadal VMC-4020 Fadal 88HS Good Yes 47" x 20" Table, 40" x 20" x 28" Travels, 10,000 RPM, 40 Taper, 15 HP, 21 ATC, Rigid Tapping, Extended Z-Travel, 4th Axis Pre-Wired 1994 Fadal VMC-4020 Fadal 88HS M0185 32,500.00 0 Yes 47" x 20" 40" x 20" x 28" 10,000 40 21 Table Travels RPM Taper ATC

10297 MACHINING CENTERS, VERTICAL, CNC 2004 Fadal VMC-4020 HT Fadal 88HS Excellent Yes 47" x 20" Table, 40" x 20" x 28" Travels, 10,000 RPM, 40 Taper, 22.5 HP, 30 ATC, Rigid Tapping, High Torque, Graphics, 422 K Memory, Cool Power 2004 Fadal VMC-4020 HT Fadal 88HS M0185 49,900.00 0 Yes 47" x 20" 40" x 20" x 20" 10,000 40 24 Table Travels RPM Taper ATC

10279 MACHINING CENTERS, VERTICAL, CNC 2005 Fadal VMC-4020 Fadal Multi-Processor CNC Very Good Yes 47" x 20" Table, 40" x 20" x 28" Travels, 10,000 RPM, 40 Taper, 22.5 HP, 30 ATC, Rigid Tapping, High Torque, Graphics, 422 K Memory, Cool Power 2005 Fadal VMC-4020 Fadal Multi-Processor CNC M0185 35,000.00 0 Yes 48" x 20" 40" x 20" x 20" 10,000 40 21 Table Travels RPM Taper ATC

9908 MACHINING CENTERS, VERTICAL, CNC 1996 Fadal VMC-6030 HT Fadal 88HS Good Yes 1996 Fadal VMC-6030 HT Fadal 88HS M0185 44,500.00 0 Yes 62.5" x 30" 60" x 30" x 30" 10,000 40 21 Table Travels RPM Taper ATC

10092 MACHINING CENTERS, VERTICAL, CNC 1998 Fadal VMC-6030 Fadal 32MP CNC Good Yes 1998 Fadal VMC-6030 Fadal 32MP CNC M0185 34,950.00 0 Yes 62.5" x 30" 60" x 30" x 30" 10,000 40 30 Table Travels RPM Taper ATC

10225 MACHINING CENTERS, VERTICAL, CNC 1989 Fadal VMC-4020 HT Fadal 88 Good Yes 1989 Fadal VMC-4020 HT Fadal 88 M0185 12,500.00 0 Yes 47" x 20" 40" x 20" x 20" 10,000 40 21 Table Travels RPM Taper ATC

10108 MACHINING CENTERS, VERTICAL, CNC 2004 Fadal VMC-8030 HT Fadal 32MP CNC Very Good Yes 82.5" x 30" Table, 80" x 30" x 30" Travels, 10,000 RPM, 22.5 HP, 40 Taper, 21 ATC, Coolant Through Spindle, Rigid Tapping, High Speed CPU, Remote Jog Handle, High Torque Motor, Coolant System 2004 Fadal VMC-8030 HT Fadal 32MP CNC M0185 72,500.00 0 Yes 82.5" x 30" 80" x 30" x 30" 10,000 40 21 Table Travels RPM Taper ATC

10109 MACHINING CENTERS, VERTICAL, CNC 1997 Fadal VMC-15 XT Fadal 88HS Very Good Yes 1997 Fadal VMC-15 XT Fadal 88HS M0185 21,500.00 0 Yes 38.5" x 16" 30" x 16" x 20" 7,500 40 21 Table Travels RPM Taper ATC

9687 MACHINING CENTERS, VERTICAL, CNC 2001 Fadal VMC-8030 Fadal Multi-Processor CNC Very Good Yes 2001 Fadal VMC-8030 Fadal Multi-Processor CNC M0185 69,500.00 0 Yes 82.5" x 30" 80" x 30" x 30" 10,000 40 21 Table Travels RPM Taper ATC

8719 MACHINING CENTERS, VERTICAL, CNC 1994 Femco VMC-1685 Mitsubishi Meldas M-3 Good Yes 1994 Femco VMC-1685 Mitsubishi Meldas M-3 M0185 36,000.00 0 Yes 74.8" x 33.5" 63" x 31.5" x 27.6" 4,000 50 32 Table Travels RPM Taper ATC

10064 MACHINING CENTERS, VERTICAL, CNC 1989 Giddings and Lewis Model 10VS G&L 8000B Very Good Yes 1989 Giddings and Lewis Model 10VS G&L 8000B M0185 -1 Yes 54" x 26" 48" x 24" x 31.5" 4,000 50 40 Table Travels RPM Taper ATC

9929 MACHINING CENTERS, VERTICAL, CNC 1998 Haas VF-OE Haas 32 BIT Very Good Yes 36" x 14" Table, 30" x 16" x 20" Travels, 7,500 RPM, 40 Taper, 20 HP, 20 ATC, Chip Auger, Rigid Tapping, RS-232 Port, Brushless Servo, 4th Axis Ready, Haas HRT-160 Rotary Table, Quick Code, Programmable Coolant, 3.5" Floppy Drive, 22,802 On Time, 8,616 Cycle Start and 6,000 Cutting Hours, Only Cut Aluminum 1998 Haas VF-OE Haas 32 BIT M0185 28,500.00 -1 Yes 36" x 14" 30" x 16" x 20" 7,500 40 20 Table Travels RPM Taper ATC

10538 MACHINING CENTERS, VERTICAL, CNC 2004 Haas VF-2 SS Haas 32 BIT Very Good Yes 2004 Haas VF-2 SS Haas 32 BIT M0185 62,900.00 0 Yes 36" x 14" 30" x 16" x 20" 12,000 40 25 Table Travels RPM Taper ATC

10408 MACHINING CENTERS, VERTICAL, CNC 1999 Haas VF-10/40 Haas 32 BIT Good Yes 120" x 28" Table, 7,500 RPM, 40 Taper, 30 HP, 24 ATC, 4th Axis Interface, Rigid Tapping, 3.5" Floppy Drive, Programmable Coolant Nozzel, Coolant Through Spindle, Chip Auger, Haas HRT-310BL Fourth Axis Rotary Table, Two (2) Speed Gear Box, Fourth and Fifth Axis Interface, Renishaw MP10 Touch Probe 1999 Haas VF-10/40 Haas 32 BIT M0185 ######## 0 Yes 120" x 28" 120" x 32" x 30" 7,500 4 24 Table Travels RPM Taper ATC

8369 MACHINING CENTERS, VERTICAL, CNC 2000 Haas VF-3 Haas 32 BIT Good Yes 48" x 18" Table, 40" x 20" x 25" Travels, 7,500 RPM, 20 HP, 40 Taper, 20 ATC, 4th Axis Interface (no tables), Chip Auger, Programmable Coolant, Rigid Tapping, 1 MB Memory, 3.5" Floppy, RS-232 Port, High Intensity Lighting, Spindle Orientation 2000 Haas VF-3 Haas 32 BIT M0185 34,500.00 -1 Yes 48" x 18" 40" x 20" x 20" 7,500 40 21 Table Travels RPM Taper ATC

10353 MACHINING CENTERS, VERTICAL, CNC 2000 Haas VF-5/50 Haas 32 BIT Good Yes 52" x 23" Table, 50" x 26" x 25" Travels, 5,000 RPM, 50 Taper, 30 HP, 30 ATC, Programmable Coolant, Rigid Tapping, Remote Pulse Generator, Geared Head, 4th Axis Drive, 2000 Haas VF-5/50 Haas 32 BIT M0185 76,000.00 0 Yes 52" x 23" 50" x 26" x 25" 5,000 50 31 Table Travels RPM Taper ATC

10618 MACHINING CENTERS, VERTICAL, CNC 2007 Haas VF-2 Haas 32 BIT Very Good Yes 2007 Haas VF-2 Haas 32 BIT M0185 68,000.00 0 Yes 36" x 14" 30" x 16" x 20" 10,000 40 24 Table Travels RPM Taper ATC

10270 MACHINING CENTERS, VERTICAL, CNC 1997 Haas VF-9/40 Creative Evolution Good Yes 1997 Haas VF-9/40 Creative Evolution M0185 89,500.00 0 Yes 84" x 36" 84" x 40" x 30" 10,000 40 20 Table Travels RPM Taper ATC

10507 MACHINING CENTERS, VERTICAL, CNC 2007 Haas VF-9/50 Haas 32 BIT Very Good Yes 2007 Haas VF-9/50 Haas 32 BIT M0185 ######## 0 Yes 84" x 36" 84" x 40" x 30" 10,000 50 30 Table Travels RPM Taper ATC

10245 MACHINING CENTERS, VERTICAL, CNC 2001 Haas VF-5/40 Haas 32 BIT Very Good Yes 2001 Haas VF-5/40 Haas 32 BIT M0185 55,000.00 0 Yes 52" x 23" 50" x 26" x 25" 7,500 40 25 Table Travels RPM Taper ATC

10539 MACHINING CENTERS, VERTICAL, CNC 2006 Haas VF-2 SS YT Haas 32 BIT Very Good Yes 2006 Haas VF-2 SS YT Haas 32 BIT M0185 69,900.00 0 Yes 36" x 18" 30" x 20" x 20" 12,000 40 24 Table Travels RPM Taper ATC

10188 MACHINING CENTERS, VERTICAL, CNC 2006 Haas VF-4 SS Haas 32 BIT Very Good Yes 2006 Haas VF-4 SS Haas 32 BIT M0185 77,000.00 0 Yes 52" x 18" 50" x 20" x 25" 12,000 40 25 Table Travels RPM Taper ATC

10514 MACHINING CENTERS, VERTICAL, CNC 2006 Haas VF-4 Haas 32 BIT Very Good Yes 2006 Haas VF-4 Haas 32 BIT M0185 79,900.00 0 Yes 52" x 18" 50" x 20" x 25" 7,500 40 24 Table Travels RPM Taper ATC

10068 MACHINING CENTERS, VERTICAL, CNC 2008 Haas VF-11/50 Haas 32 BIT New, Never Used No 2008 Haas VF-11/50 Haas 32 BIT M0185 ######## -1 Yes 120" x 28" 120" x 40" x 30" 7,500 50 31 Table Travels RPM Taper ATC

10459 MACHINING CENTERS, VERTICAL, CNC 2004 Haas VF-4 SS Haas 32 BIT Very Good Yes 2004 Haas VF-4 SS Haas 32 BIT M0185 78,000.00 0 Yes 52" x 18" 50" x 20" x 25" 12,000 40 25 Table Travels RPM Taper ATC

10478 MACHINING CENTERS, VERTICAL, CNC 1999 Haas VF-6/40 Haas 32 BIT Good Yes 1999 Haas VF-6/40 Haas 32 BIT M0185 62,000.00 0 Yes 64" x 28" 64" x 32" x 30" 7,500 40 24 Table Travels RPM Taper ATC

10549 MACHINING CENTERS, VERTICAL, CNC 1997 Haas VF-4 Haas 32 BIT Good Yes 1997 Haas VF-4 Haas 32 BIT M0185 41,000.00 0 Yes 52" x 18" 50" x 20" x 25" 7,500 40 20 Table Travels RPM Taper ATC

9989 MACHINING CENTERS, VERTICAL, CNC 1997 Haas VF-8/40 Haas 32 BIT Good Yes 1997 Haas VF-8/40 Haas 32 BIT M0185 40,000.00 -1 Yes 64" x 36" 64" x 40" x 30" 10,000 40 20 Table Travels RPM Taper ATC

10512 MACHINING CENTERS, VERTICAL, CNC 1997 Haas VF-9/40 Haas 32 BIT Very Good Yes 1997 Haas VF-9/40 Haas 32 BIT M0185 98,500.00 0 Yes 84" x 36" 84" x 40" x 30" 7,500 40 30 Table Travels RPM Taper ATC

10510 MACHINING CENTERS, VERTICAL, CNC 1997 Haas VF-4 Haas 32 BIT Good Yes 1997 Haas VF-4 Haas 32 BIT M0185 28,000.00 0 Yes 52" x 18" 50" x 20" x 25" 10,000 40 21 Table Travels RPM Taper ATC

10508 MACHINING CENTERS, VERTICAL, CNC 2000 Haas VF-3 Haas 32 BIT Very Good Yes 2000 Haas VF-3 Haas 32 BIT M0185 36,000.00 0 Yes 48" x 18" 40" x 20" x 25" 10,000 40 32 Table Travels RPM Taper ATC

9927 MACHINING CENTERS, VERTICAL, CNC 1995 Haas VF-4 Haas 32 BIT Good Yes 52" x 18" Table, 50" x 20" x 25" Travels, 7,500 RPM, 15 HP, 21 ATC, 4th Axis Interface, Quick Code, Rigid Tapping, Chip Auger, 3.5" Floppy Drive, Two Speed Geared Head, Programmable Coolant, RS-232 Port, 4th Axis Ready - Great Running Inexpensive Haas! 1995 Haas VF-4 Haas 32 BIT M0185 26,500.00 0 Yes 52" x 18" 50" x 20" x 25" 7,500 40 21 Table Travels RPM Taper ATC

10589 MACHINING CENTERS, VERTICAL, CNC 2000 Haas TM-1 Haas 32 BIT Excellent Yes 2000 Haas TM-1 Haas 32 BIT M0185 24,500.00 0 Yes 47.75" x 10.5" 30" x 12" x 16" 4,000 40 10 Table Travels RPM Taper ATC

7695 MACHINING CENTERS, VERTICAL, CNC 1998 Haas VF-5/40 Haas 32 BIT Good Yes 1998 Haas VF-5/40 Haas 32 BIT M0185 59,900.00 0 Yes 52" x 23" 50" x 26" x 25" 7,500 40 20 Table Travels RPM Taper ATC

10047 MACHINING CENTERS, VERTICAL, CNC 2005 Mazak Nexus VCN-510C Mazatrol Fusion 640 M Very Good Yes 2005 Mazak Nexus VCN-510C Mazatrol Fusion 640 M M0185 74,500.00 0 Yes 51.1" x 21.6" 41.3" x 20" x 20" 12,000 40 30 Table Travels RPM Taper ATC

10226 MACHINING CENTERS, VERTICAL, CNC 1990 Mazak VQC-15/40 Mazatrol M-32 Needs Repair Yes 35.4" x 16.1" Table, 22" x 16" x 15.75" Travels, 6,000 RPM, 10 HP, 16 Station ATC, Coolant System, Color CRT 1990 Mazak VQC-15/40 Mazatrol M-32 M0185 -1 On Way 35.4" x 16.1" 22" x 16" x 15.75" 6,000 40 16 Table Travels RPM Taper ATC

10138 MACHINING CENTERS, VERTICAL, CNC 2009 Mazak Votex 815/120 Fanuc 31iMA Very Good Yes 2009 Mazak Votex 815/120 Fanuc 31iMA M0185 ######## 0 Yes 127.56" x 31.9" 120" x 31.89" x 24.02" 13,000 50 60 Table Travels RPM Taper ATC

9584 MACHINING CENTERS, VERTICAL, CNC 1996 Mazak VTC-16B Mazatrol M-32B Good Yes 57.5" x 16.1"Table, 44" x 16" x 20" Travels, 7,000 RPM, 40 Taper, 15 HP, 24 ATC, EIA / ISO Input Function, Conversational Programming, Graphic Display, Helical Interpolation, Auto Tool Length Measurement, Rigid Tapping 1996 Mazak VTC-16B Mazatrol M-32B M0185 25,000.00 -1 Yes 57.48" x 16.1" 44.09" x 16.14" x 20.08" 7,000 40 24 Table Travels RPM Taper ATC

10065 MACHINING CENTERS, VERTICAL, CNC 1998 Mazak MTV-655 / 80N Mazatrol M-Plus Very Good Yes 1998 Mazak MTV-655 / 80N Mazatrol M-Plus M0185 96,000.00 -1 Yes 88" x 25" 78.74" x 25.6" x 25.6" 6,000 50 30 Table Travels RPM Taper ATC

9583 MACHINING CENTERS, VERTICAL, CNC 1999 Mazak VTC-16B Mazatrol Fusion 640 M Very Good Yes 57.5" x 16.1"Table, 44" x 16" x 20" Travels, 7,000 RPM, 40 Taper, 15 HP, 24 ATC, EIA / ISO Input Function, Conversational Programming, Graphic Display, Helical Interpolation, Auto Tool Length Measurement, Rigid Tapping 1999 Mazak VTC-16B Mazatrol Fusion 640 M M0185 32,500.00 -1 Yes 57.48" x 16.1" 44.09" x 16.14" x 20.08" 8,000 40 24 Table Travels RPM Taper ATC

10610 MACHINING CENTERS, VERTICAL, CNC 1996 Mazak VTC-20B Mazatrol M-32B Fair Yes 1996 Mazak VTC-20B Mazatrol M-32B M0185 18,000.00 0 Yes 57.48" x 20.1" 44.09" x 20.08" x 20.08" 8,000 40 24 Table Travels RPM Taper ATC

10487 MACHINING CENTERS, VERTICAL, CNC 1995 Mazak V-655 / 80 Mazatrol T-32 Good Yes 1995 Mazak V-655 / 80 Mazatrol T-32 M0185 76,500.00 0 Yes 68.5" x 25.59" 78" x 25.59" x 25.59" 6,000 50 30 Table Travels RPM Taper ATC

9988 MACHINING CENTERS, VERTICAL, CNC 1998 Mazak MTV-655 / 80N Mazatrol M-Plus Good Yes 1998 Mazak MTV-655 / 80N Mazatrol M-Plus M0185 96,000.00 -1 Yes 88" x 25" 78.74" x 25.6" x 25.6" 6,000 50 30 Table Travels RPM Taper ATC

10534 MACHINING CENTERS, VERTICAL, CNC 2000 Mazak VTC-300C Mazatrol Fusion 640 M Very Good Yes 2000 Mazak VTC-300C Mazatrol Fusion 640 M M0185 ######## 0 Yes 78.74" x 30" 65.35" x 30" x 26" 10,000 40 24 Table Travels RPM Taper ATC

10497 MACHINING CENTERS, VERTICAL, CNC 2004 Mazak Nexus VCN-410A Mazatrol Fusion 640 M Good Yes 2004 Mazak Nexus VCN-410A Mazatrol Fusion 640 M M0185 52,500.00 0 Yes 35.43" x 16.14" 22.05" x 16.14" x 20.08" 12,000 40 30 Table Travels RPM Taper ATC

9610 MACHINING CENTERS, VERTICAL, CNC 1998 Mazak VTC-20B Mazatrol Fusion 640 M Good Yes 1998 Mazak VTC-20B Mazatrol Fusion 640 M M0185 42,500.00 0 Yes 57.4" x 20.08" 44.09" x 20.08" x 20.08" 8,000 40 24 Table Travels RPM Taper ATC

8843 MACHINING CENTERS, VERTICAL, CNC 1999 Mighty Viper VMC-950 Mitsubishi Magic 640 Very Good Yes 50" x 18" Table, 40" x 20" x 24.8" Travels, 8,000 RPM, 40 Taper, 25 HP, 21 ATC, Color Graphic Control, Remote Jog Handle, Chip Auger, Chip Flood Wash System, Hard Drive, Mighty Chip Cart, 3,000 Hours On Machine. Control Completely Rebuilt By Mitsubishi March 2005 1999 Mighty Viper VMC-950 Mitsubishi Magic 640 M0185 24,500.00 -1 Yes 50" x 18" 40" x 20" x 24.8" 8,000 40 21 Table Travels RPM Taper ATC

10380 MACHINING CENTERS, VERTICAL, CNC 1995 Mighty Comet VMC-1100 PH Control ??? Good Yes 1995 Mighty Comet VMC-1100 PH Control ??? M0185 -1 On Way 49" x 24" 42" x 22" x 25" 8,000 40 24 Table Travels RPM Taper ATC

10604 MACHINING CENTERS, VERTICAL, CNC 1999 Mighty Viper VMC-2100 Fanuc 18M Very Good Yes 83" x 41.3" Table, 81" x 41.3" x 32.3" Travels, 6,000 RPM, 30 HP, 50 Taper, 30 ATC, Full Enclosure, Air Blast Through Spindle, Glass Scales, Spindle Chiller, Color Monitor With Graphics, Chip Auger 1999 Mighty Viper VMC-2100 Fanuc 18M M0185 89,900.00 0 Yes 83" x 41.3" 81" x 41.3" x 32.3" 6,000 50 30 Table Travels RPM Taper ATC

9168 MACHINING CENTERS, VERTICAL, CNC 2000 Mighty Viper VMC-1600 A Mitsubishi Magic 640 Very Good Yes 2000 Mighty Viper VMC-1600 A Mitsubishi Magic 640 M0185 74,900.00 0 Yes 66.9" x 29.5" 63" x 31" x 23.5" 8,000 40 32 Table Travels RPM Taper ATC

9516 MACHINING CENTERS, VERTICAL, CNC 1998 Milltronics VM-24 Centurion 6 Very Good Yes 1998 Milltronics VM-24 Centurion 6 M0185 24,500.00 0 Yes 45" x 24" 40" x 24" x 24" 6,000 40 20 Table Travels RPM Taper ATC

9420 MACHINING CENTERS, VERTICAL, CNC 1996 Milltronics Partner Centurion 7 Very Good Yes 1996 Milltronics Partner Centurion 7 M0185 20,000.00 -1 Yes 45" x 16" 34" x 16" x 20" 6,000 40 12 Table Travels RPM Taper ATC

9763 MACHINING CENTERS, VERTICAL, CNC 2000 Milltronics CSS-1000 CGI Centurion 6 SLS Very Good Yes 45" x 16" Table, 30" x 16" x 16" Travels, 8,000 RPM, 24 HP, 20 ATC, Reverse Engineering 2000 Milltronics CSS-1000 CGI Centurion 6 SLS M0185 58,000.00 -1 Yes 45" x 16" 30" x 16" x 20" 8,000 40 20 Table Travels RPM Taper ATC

9943 MACHINING CENTERS, VERTICAL, CNC 2006 Milltronics RH-33 XP Centurion 7 Very Good Yes 2006 Milltronics RH-33 XP Centurion 7 M0185 69,900.00 0 Yes 86" x 32" 78" x 33" x 28" 15,000 40 24 Table Travels RPM Taper ATC

10070 MACHINING CENTERS, VERTICAL, CNC 1999 Mitsubishi MV-70E Mitsubishi 520M Very Good Yes 1999 Mitsubishi MV-70E Mitsubishi 520M M0185 59,500.00 0 Yes 65" x 27.6" 49.2" x 27.6" x 25.6" 12,000 50 40 Table Travels RPM Taper ATC

10112 MACHINING CENTERS, VERTICAL, CNC 1985 Mitsui-Seiki VR-3A Fanuc 6M Good Yes 29.5" x 20.08" Table, 27.56" x 17.7" x 17.7" Travels, 6,000 RPM, 40 Taper, 10 HP, 20 ATC, Coolant System, Remote Jog Handle 1985 Mitsui-Seiki VR-3A Fanuc 6M M0185 34,000.00 -1 Yes 29.5" x 20.08" 27.56" x 17.7" x 17.7" 6,000 40 20 Table Travels RPM Taper ATC

10503 MACHINING CENTERS, VERTICAL, CNC 1995 Monarch VMC-175B Fanuc 16M Good Yes 1995 Monarch VMC-175B Fanuc 16M M0185 49,500.00 0 Yes 84" x 30" 76" x 44" x 36" 6,000 50 30 Table Travels RPM Taper ATC

10603 MACHINING CENTERS, VERTICAL, CNC 1997 Monarch VMC-150B Fanuc 16MB Good Yes 1997 Monarch VMC-150B Fanuc 16MB M0185 59,500.00 0 Yes 64" x 30" 50" x 30" x 26" 6,000 50 30 Table Travels RPM Taper ATC

9996 MACHINING CENTERS, VERTICAL, CNC 2000 Mori-Seiki SV-500 B / 40 Fanuc 18M Very Good Yes 43.31" x 23.62" Table, 31.5" x 20.08" x 20.08" Travels, 10,000 RPM, 22 HP, 30 ATC, Rigid Tapping, Helical Interpolation 2000 Mori-Seiki SV-500 B / 40 Fanuc 18M M0185 69,000.00 0 Yes 43.31" x 23.62" 31.5" x 20.08" x 20.08" 10,000 40 30 Table Travels RPM Taper ATC

10581 MACHINING CENTERS, VERTICAL, CNC 2010 Mori-Seiki NV-7000 / 50 Mori-Seiki MSX-701 IV Like New Yes 2010 Mori-Seiki NV-7000 / 50 Mori-Seiki MSX-701 IV M0185 ######## 0 Yes 67" x 30" 40.2" x 20.1" x 20.1" 8,000 50 30 Table Travels RPM Taper ATC

9998 MACHINING CENTERS, VERTICAL, CNC 2000 Mori-Seiki SV-503 B / 40 Fanuc 18M Good Yes 52" x 23.6" Table, 31.5" x 20.1" x 20.1" Travels, 10,000 RPM's, 50 Taper, 30 HP, 30 ATC, 1,653 Rapids 2000 Mori-Seiki SV-503 B / 40 Fanuc 18M M0185 89,000.00 0 Yes 43.3" x 23.6" 31.5" x 20.1" x 20.1" 10,000 50 30 Table Travels RPM Taper ATC

9971 MACHINING CENTERS, VERTICAL, CNC 2003 Mori-Seiki NV-5000A / 50 Mitsubishi MSC-501 (18iMA) Very Good Yes 2003 Mori-Seiki NV-5000A / 50 Mitsubishi MSC-501 (18iMA) M0185 99,000.00 0 Yes 43.3" x 23.6" 31.5" x 20.1" x 29.1" 8,000 50 30 Table Travels RPM Taper ATC

9571 MACHINING CENTERS, VERTICAL, CNC 2003 Mori-Seiki NV-5000A / 40 Mitsubishi MSC-501 (18iMA) Excellent Yes 2003 Mori-Seiki NV-5000A / 40 Mitsubishi MSC-501 (18iMA) M0185 ######## 0 Yes 43.3" x 23.6" 31.5" x 20.1" x 20.1" 12,000 40 30 Table Travels RPM Taper ATC

8991 MACHINING CENTERS, VERTICAL, CNC 1992 Mori-Seiki MV-65 Yasnac I80M Very Good Yes 1992 Mori-Seiki MV-65 Yasnac I80M M0185 ######## 0 Yes 66.93" x 25.59" 60" x 25.6" x 25.6" 4,000 40 30 Table Travels RPM Taper ATC

9311 MACHINING CENTERS, VERTICAL, CNC 2004 Mori-Seiki Duracenter 5 Mori-Seiki MSX-501 Very Good Yes 2004 Mori-Seiki Duracenter 5 Mori-Seiki MSX-501 M0185 72,000.00 0 Yes 43.3" x 23.6" 31.5" x 20.1" x 20.1" 12,000 40 20 Table Travels RPM Taper ATC

9383 MACHINING CENTERS, VERTICAL, CNC 1989 Mori-Seiki MV-JR Yasnac MX-3 Good No 1989 Mori-Seiki MV-JR Yasnac MX-3 M0185 15,500.00 -1 Yes 35.4" x 17.7" 22" x 16.1" x 16.1" 8,000 40 20 Table Travels RPM Taper ATC

10511 MACHINING CENTERS, VERTICAL, CNC 2005 Mori-Seiki NV-5000A1B / 40 Fanuc 18iM Very Good Yes 2005 Mori-Seiki NV-5000A1B / 40 Fanuc 18iM M0185 ######## 0 Yes 52" x 23.6" 40.2" x 20.1" x 20.1" 14,000 40 30 Table Travels RPM Taper ATC

9855 MACHINING CENTERS, VERTICAL, CNC 2006 Mori-Seiki NV-5000A / 40 Fanuc 18M Good Yes 2006 Mori-Seiki NV-5000A / 40 Fanuc 18M M0185 ######## 0 Yes 43.3" x 23.6" 31.5" x 27.95" x 20.1" 8,000 50 30 Table Travels RPM Taper ATC

8742 MACHINING CENTERS, VERTICAL, CNC 1985 Mori-Seiki MV-JR Yasnac MX-2 Good Yes 1985 Mori-Seiki MV-JR Yasnac MX-2 M0185 15,000.00 -1 Yes 35" x 17" 22" x 16" x 18" 6,000 40 30 Table Travels RPM Taper ATC

9392 MACHINING CENTERS, VERTICAL, CNC 2003 Mori-Seiki NV-5000A / 50 Mitsubishi MSC-501 (18iMA) Very Good Yes 2003 Mori-Seiki NV-5000A / 50 Mitsubishi MSC-501 (18iMA) M0185 ######## 0 Yes 43.3" x 23.6" 31.5" x 27.95" x 20.1" 8,000 50 30 Table Travels RPM Taper ATC

10499 MACHINING CENTERS, VERTICAL, CNC 2001 Makino Max 65S Makino Pro 3 Very Good Yes 2001 Makino Max 65S Makino Pro 3 M0185 79,500.00 0 Yes 33.46" x 17.72" 25.59" x 15.75" x 15.75" 12,000 40 20 Table Travels RPM Taper ATC

9391 MACHINING CENTERS, VERTICAL, CNC 2003 Makino S56 Makino Pro 3 Very Good Yes 2003 Makino S56 Makino Pro 3 M0185 89,500.00 0 Yes 39.4" x 19.7" 35.4" x 19.7" x 17.7" 13,000 40 20 Table Travels RPM Taper ATC

9384 MACHINING CENTERS, VERTICAL, CNC 1987 Matsuura MC-760V Yasnac MX-2 Good No 1987 Matsuura MC-760V Yasnac MX-2 M0185 16,500.00 -1 Yes 45.25" x 16.14" 29.92" x 17.32" x 19.09" 4,500 40 30 Table Travels RPM Taper ATC

9158 MACHINING CENTERS, VERTICAL, CNC 1994 Matsuura MC-600-VF Yasnac I80 Needs Repair Yes 1994 Matsuura MC-600-VF Yasnac I80 M0185 19,500.00 -1 Yes 34.6" x 15.7" 23.62" x 16.14" x 18.5" 8,000 40 30 Table Travels RPM Taper ATC

10545 MACHINING CENTERS, VERTICAL, CNC 2003 Mazak Nexus VCN-410B Mazatrol Fusion 640 M Very Good Yes 2003 Mazak Nexus VCN-410B Mazatrol Fusion 640 M M0185 53,000.00 0 Yes 43.43" x 16.14" 30" x 16.14" x 20.08" 12,000 40 30 Table Travels RPM Taper ATC

8715 MACHINING CENTERS, VERTICAL, CNC 1998 Mazak VTC-20C Mazatrol M-Plus Good Yes 79" x 20.08" Table, 65" x 20.08" x 20.08" Travels, 7,000 RPM, 40 Taper, 20 HP, 48 ATC, Conversational Programming, EIA / ISO Input Function, Graphic Display, Rigid Tapping, Chip Conveyor, Center Divider For Running As a Two (2) Station Machine, Fix Table Traveling Column 1998 Mazak VTC-20C Mazatrol M-Plus M0185 48,000.00 -1 Yes 79" x 20.08" 65" x 20.08" x 20.08" 7,000 40 48 Table Travels RPM Taper ATC

10145 MACHINING CENTERS, VERTICAL, CNC 1998 Mazak VTC-20C Mazatrol M-Plus Good Yes 78.7" x 20.01" Table, 64.09" x 20.08" x 20.05" Travels, 7,000 RPM, 40 Taper, 20 HP, 24 ATC, Conversational Programming, EIA / ISO Input Function, Graphic Display, Manual Indexer, Chip Conveyor, Tool Breakage Detection, Tool Life Monitoring, Renishaw Touch Probe Prep 1998 Mazak VTC-20C Mazatrol M-Plus M0185 39,500.00 0 Yes 78.7" x 20.01" 64.09" x 20.08" x 20.05" 8,000 40 24 Table Travels RPM Taper ATC

9835 MACHINING CENTERS, VERTICAL, CNC 1997 Mazak VTC-16B Mazatrol M-32B Good Yes 1997 Mazak VTC-16B Mazatrol M-32B M0185 -1 On Way 57.48" x 16.1" 44.09" x 16.14" x 20.08" 10,000 40 24 Table Travels RPM Taper ATC

9832 MACHINING CENTERS, VERTICAL, CNC 1997 Mazak VTC-20B Mazatrol M-Plus Good Yes 1997 Mazak VTC-20B Mazatrol M-Plus M0185 44,500.00 0 Yes 57.4" x 20.08" 44.09" x 20.08" x 20.08" 7,000 40 24 Table Travels RPM Taper ATC

8797 MACHINING CENTERS, VERTICAL, CNC 1996 Mazak VTC-16B Mazatrol M-Plus Very Good Yes 57.5" x 16.1" Table, 44" x 16" x 20" Travels, 8,000 RPM, 40 Taper, 15 HP, 24 ATC, EIA / ISO Input Function, Conversational Programming, Auto Tool Length Measurement, Rigid Tapping 1996 Mazak VTC-16B Mazatrol M-Plus M0185 30,000.00 -1 Yes 57.48" x 16.1" 44.09" x 16.14" x 20.08" 8,000 40 24 Table Travels RPM Taper ATC

7596 TABLES, ROTARY Giddings and Lewis 48" Good Yes Giddings and Lewis 48" T0140 19,500.00 0 Yes 48" 1/2° Manual 27,000 Lbs Table Indexing Type Weight Cap.

8074 TABLES, ROTARY Giddings and Lewis 48" x 48" Rotary Table Good Yes Giddings and Lewis 48" x 48" Rotary Table T0140 4,500.00 0 Yes 48" x 48" 1° Manual 20,000 Lbs Table Indexing Type Weight Cap.

8075 TABLES, ROTARY Giddings and Lewis 60" x 60" Rotary Table Good Yes Giddings and Lewis 60" x 60" Rotary Table T0140 4,900.00 0 Yes 60" x 60" 1° Manual 20,000 Table Indexing Type Weight Cap.

8146 TABLES, ROTARY Knight 48" x 48" Good Yes Knight 48" x 48" T0140 8,950.00 0 Yes 48" x 48" 1° Manual 20,000 Lbs Table Indexing Type Weight Cap.

10236 TABLES, ROTARY 1980 Rotab 48" Good No 1980 Rotab 48" T0140 39,500.00 0 Yes 48" 1° Electric 10,000 Lbs Table Indexing Type Weight Cap.

8677 TABLES, ROTARY Troyke U-18 Very Good Troyke U-18 T0140 1,800.00 -1 Yes 18" 1° Manual 540 Lbs Table Indexing Type Weight Cap.

8328 TESTERS, ROUNDNESS 2002 Precitech Precision FMS 8150 Very Good Yes 2002 Precitech Precision FMS 8150 T2300 13,000.00 -1 Yes 1 Machine Style Max. Work Area Max. Work Surface

10170 THREAD ROLLERS Lian Feng LF-40 Very Good Yes Lian Feng LF-40 T2520 15,000.00 0 Yes 1 Work Diameter Thread Length Die Speeds Teeth Per Inch Roll Pressure

10174 THREAD ROLLERS Reed A22 Good Yes Reed A22 T2520 24,500.00 0 Yes 1 Work Diameter Thread Length Die Speeds Teeth Per Inch Roll Pressure

10168 THREAD ROLLERS 1970 Reed B112 Very Good Yes 1970 Reed B112 T2520 22,500.00 0 Yes 1 Work Diameter Thread Length Die Speeds Teeth Per Inch Roll Pressure

9184 TOOL PRESETTING MACHINES 1999 Zoller Bravo L Premium Very Good Yes 1999 Zoller Bravo L Premium T3870 11,500.00 0 Yes 1 Measuring Range Measuring Diameter Travels Max. Weight

9818 VIBRATORS (Incl. Vibratory Finishers) 1987 Almco OR-10 Very Good Yes 1987 Almco OR-10 V2753 95,000.00 -1 Yes 1 Cubic Feet Tub Load Max. Part HP

7105 VIBRATORS (Incl. Vibratory Finishers) 1977 Sweco FC-70 Good Yes Bowl Capacity - 70 Cubic Feet, Barrel Diameter - 92", 20 HP, Internal Separation / Automatic Unloading, Polyurethane Lined Bowl, Additional 10" Collar Added to the Top 1977 Sweco FC-70 V2753 22,000.00 -1 Yes 1 Cubic Feet Tub Load Max. Part HP

8196 VIBRATORY FEEDERS Matrix Bowl Feeder Excellent Yes Matrix Bowl Feeder V3004 6,500.00 -1 Yes 1 Capacity Barrel Channel Size HP

10103 WATER JET CUTTING, CNC 2008 Flow International I-6012 Flowmaster PC Based Controller Very Good Yes 2008 Flow International I-6012 Flowmaster PC Based Controller W0760 ######## 0 Yes 1 Table Table Load Travels HP PSI

8177 WATER JET CUTTING, CNC 2003 Jet Edge AMC 3030 Very Good Yes 2003 Jet Edge AMC 3030 W0760 99,500.00 0 Yes 1 Table Table Load Travels HP PSI

8703 WELDERS, ROTARY TABLE TYPE Bancroft 350 Good Yes Bancroft 350 W2802 11,500.00 0 Yes 1 Clamping Force Vertical Stroke Rotation Speed AMP

8294 WELDING POSITIONERS 2007 --Select Mfg Here-- 10,000 Lbs Very Good Yes 2007 --Select Mfg Here-- 10,000 Lbs W3752 19,500.00 0 Yes 1 Cap. Table HP

9245 WELDING POSITIONERS 2008 Pandjiris 60-12-AB New Yes 2008 Pandjiris 60-12-AB W3752 29,900.00 0 Yes 1 Cap. Table HP

9246 WELDING POSITIONERS Ransome 60 Very Good Yes Ransome 60 W3752 16,000.00 0 Yes 1 Cap. Table HP

8313 WELDING POSITIONERS SVF 72" Fair Yes SVF 72" W3752 14,500.00 0 Yes 1 Cap. Table HP

8421 WIRE MACHINERY, FORMING U.S. Tool Company #33 Multi-Slide Very Good Yes Maximum Stock Width 2 1/2", Maximum Stock Thickness 3/32", Maximum Feed Length 12 1/2", 40 - 160 SPM, 5 HP, Twelve (12) Channel Touch Screen Control, Vari Drive (like new), Air Clutch and Brake, Two (2) Press Heads, One (1) Double Length Bolster, One (1) Box of Accessories, Rack & Pinion Stripper Head, Front Cut Off Unit, Vacuum System for Slugs, Positive Check Feed, Stock Mister U.S. Tool Company #33 Multi-Slide W5903 36,000.00 -1 Yes 1 Width Thickness Length SPM HP

7995 MACHINING CENTERS, VERTICAL, CNC 1993 Mori-Seiki MV-40 Yasnac I80 Very Good Yes 35.3" x 18" Table, 22" x 16.15" x 18.12" Travels, 8,000 RPM, 40 Taper, 22 HP, Very Low Hours 1993 Mori-Seiki MV-40 Yasnac I80 M0185 28,000.00 -1 Yes 35.3" x 18" 22" x 16.15" x 18.12" 8,000 40 20 Table Travels RPM Taper ATC

9003 MACHINING CENTERS, VERTICAL, CNC 1996 Okada GMC-654 Fanuc 160MC Good Yes 1996 Okada GMC-654 Fanuc 160MC M0185 39,500.00 0 Yes 23.6" x 19.7" 23.6" x 19.7" x 15.7" 25,000 30 8 Table Travels RPM Taper ATC

9788 MACHINING CENTERS, VERTICAL, CNC 1998 Okada GMC-654 Fanuc 160MC Very Good Yes 1998 Okada GMC-654 Fanuc 160MC M0185 36,500.00 0 Yes 23.6" x 19.7" 23.6" x 19.7" x 15.7" 25,000 30 8 Table Travels RPM Taper ATC

9827 MACHINING CENTERS, VERTICAL, CNC 1997 OKK MCV-660 Fanuc 16M Good Yes 1997 OKK MCV-660 Fanuc 16M M0185 89,500.00 0 Yes 66.93" x 25.59" 59.84" x 25.98" x 25.98" 4,500 50 24 Table Travels RPM Taper ATC

10557 MACHINING CENTERS, VERTICAL, CNC 2001 OKK VM-7 OKK NeoMatic 635 (Meldas) Good Yes 68" x 32" Table, 60.27" x 29.17" x 26.02" Travels, 13,000 RPM, 50 Taper, 20 HP, 30 ATC, Two (2) Speed Geared Head, Coolant Through Spindle, Rigid Tapping, Chip Augers, Remote Jog Handle 2001 OKK VM-7 OKK NeoMatic 635 (Meldas) M0185 ######## 0 Yes 61.02" x 29.13" 60.24" x 29.13" x 25.98" 13,000 50 30 Table Travels RPM Taper ATC

9769 MACHINING CENTERS, VERTICAL, CNC 1993 OKK PCV-50 Fanuc 18M Very Good 1993 OKK PCV-50 Fanuc 18M M0185 24,500.00 0 Yes 36.2" x 20.47" 28.34" x 20.47" x 20.47" 6,000 40 30 Table Travels RPM Taper ATC

10364 MACHINING CENTERS, VERTICAL, CNC 2006 OKK VM-5 III Fanuc 180iM Excellent Yes 59.06" x 25.98"Table, 40" x 20" x 20" Travels, 10,000 RPM, 50 Taper, 15 HP, 20 ATC, Coolant System, Spindle Chiller, 2006 OKK VM-5 III Fanuc 180iM M0185 ######## 0 Yes 59.06" x 25.98" 40.15" x 20.08" x 20.08" 10,000 40 30 Table Travels RPM Taper ATC

10517 MACHINING CENTERS, VERTICAL, CNC 2002 OKK VM-5 II Mitsubishi 635M Very Good Yes 2002 OKK VM-5 II Mitsubishi 635M M0185 ######## 0 Yes 41.34" x 22.05" 40.15" x 20.08" x 20.08" 13,000 50 20 Table Travels RPM Taper ATC

10579 MACHINING CENTERS, VERTICAL, CNC 1999 Okuma MC-60 VAE OSP-7000M Very Good Yes 1999 Okuma MC-60 VAE OSP-7000M M0185 69,500.00 0 Yes 70.87" x 30.71" 59" x 24.8" x 24" 5,000 50 20 Table Travels RPM Taper ATC

10571 MACHINING CENTERS, VERTICAL, CNC 1996 Okuma MX-45 VAE OSP-7000M Very Good Yes 1996 Okuma MX-45 VAE OSP-7000M M0185 34,500.00 0 Yes 39.27" x 20.1" 30" x 18.11" x 17.70" 7,000 40 20 Table Travels RPM Taper ATC

10489 MACHINING CENTERS, VERTICAL, CNC 1996 Okuma MX-45 VA OSP-700M Very Good Yes 1996 Okuma MX-45 VA OSP-700M M0185 25,500.00 0 Yes 29" x 18.11" 22" x 18.1" x 17" 7,000 40 20 Table Travels RPM Taper ATC

9502 MACHINING CENTERS, VERTICAL, CNC 1997 Okuma Cadet Mate V-4020 OSP-5020MG Very Good Yes 1997 Okuma Cadet Mate V-4020 OSP-5020MG M0185 32,500.00 0 Yes 47.24" x 20.08" 40" x 20" x 20" 8,000 40 20 Table Travels RPM Taper ATC

9526 MACHINING CENTERS, VERTICAL, CNC 1999 Okuma MC-60 VAE OSP-7000M Good Yes 1999 Okuma MC-60 VAE OSP-7000M M0185 55,900.00 0 Yes 70.87" x 30.71" 59" x 24.8" x 24" 5,000 50 32 Table Travels RPM Taper ATC

9607 MACHINING CENTERS, VERTICAL, CNC 1997 Okuma Cadet Mate V-4020 OSP-700M Very Good Yes 1997 Okuma Cadet Mate V-4020 OSP-700M M0185 29,500.00 0 Yes 47.24" x 20.08" 40" x 20" x 20" 8,000 40 20 Table Travels RPM Taper ATC

10447 MACHINING CENTERS, VERTICAL, CNC 2002 Okuma ES V-4020 OSP-U10M Good Yes 2002 Okuma ES V-4020 OSP-U10M M0185 24,500.00 0 Yes 47.24" x 20.08" 40" x 20" x 20" 8,000 40 20 Table Travels RPM Taper ATC

8463 MACHINING CENTERS, VERTICAL, CNC 1997 Okuma MX-45 VAE OSP-700M Good Yes 1997 Okuma MX-45 VAE OSP-700M M0185 42,500.00 0 No 39.37" x 18.11" 30" x 18.11" x 17.7" 7,000 40 20 Table Travels RPM Taper ATC

10448 MACHINING CENTERS, VERTICAL, CNC 2000 Okuma Crown V-4018 OSP-U10M Very Good Yes 2000 Okuma Crown V-4018 OSP-U10M M0185 38,500.00 0 Yes 48" x 20" 40" x 18.11" x 17.72" 8,000 40 20 Table Travels RPM Taper ATC

9614 MACHINING CENTERS, VERTICAL, CNC 1999 Okuma Cadet Mate V-4020 OSP-700M Good Yes 1999 Okuma Cadet Mate V-4020 OSP-700M M0185 32,500.00 0 Yes 47.24" x 20.08" 40" x 20" x 20" 8,000 40 20 Table Travels RPM Taper ATC

9609 MACHINING CENTERS, VERTICAL, CNC 2003 Okuma ES V-4020 OSP-U10M Good No 2003 Okuma ES V-4020 OSP-U10M M0185 32,500.00 0 Yes 47.24" x 20.08" 40" x 20" x 20" 8,000 40 20 Table Travels RPM Taper ATC

10486 MACHINING CENTERS, VERTICAL, CNC 2001 Okuma Crown V-4018 OSP-U10M Very Good Yes 2001 Okuma Crown V-4018 OSP-U10M M0185 45,000.00 0 Yes 47.24" x 20" 40" x 18.11" x 17.72" 12,000 40 20 Table Travels RPM Taper ATC

9572 MACHINING CENTERS, VERTICAL, CNC 2008 Okuma Millac 853-PF Fanuc 31i Excellent Yes 2008 Okuma Millac 853-PF Fanuc 31i M0185 ######## 0 Yes 126" x 35.24" 120.08" x 33.5" x 27.56" 12,000 50 30 Table Travels RPM Taper ATC

9137 MACHINING CENTERS, VERTICAL, CNC 2000 Okuma MX-45 VAE OSP-700M Very Good Yes 2000 Okuma MX-45 VAE OSP-700M M0185 29,500.00 0 Yes 39.37" x 18.11" 30" x 18.11" x 17.7" 7,000 40 20 Table Travels RPM Taper ATC

10531 MACHINING CENTERS, VERTICAL, CNC 1999 Okuma MC-60 VAE OSP-7000M Very Good Yes 1999 Okuma MC-60 VAE OSP-7000M M0185 69,500.00 0 Yes 70.87" x 30.71" 59.06" x 24.8" x 24.02" 5,000 50 20 Table Travels RPM Taper ATC

10616 MACHINING CENTERS, VERTICAL, CNC 2006 Okuma MC V-4020 OSP-E100M Excellent Yes 2006 Okuma MC V-4020 OSP-E100M M0185 69,500.00 0 Yes 48" x 20.08" 40" x 20" x 17.7" 15,000 40 20 Table Travels RPM Taper ATC

10366 MACHINING CENTERS, VERTICAL, CNC 1997 Okuma and Howa Millac-852V Fanuc 16M Very Good Yes 1997 Okuma and Howa Millac-852V Fanuc 16M M0185 ######## 0 Yes 86.60" x 35.24" 80.71" x 33.46" x 29.53" 6,000 50 36 Table Travels RPM Taper ATC

10429 MACHINING CENTERS, VERTICAL, CNC 2000 Okuma and Howa Millac-511V Fanuc 16MC Very Good Yes 2000 Okuma and Howa Millac-511V Fanuc 16MC M0185 42,500.00 0 Yes 50" x 20.08" 40" x 20" x 20.5" 10,000 40 24 Table Travels RPM Taper ATC

9750 MACHINING CENTERS, VERTICAL, CNC 1986 Okuma and Howa Millac 4VA Fanuc 6M Good Yes 1986 Okuma and Howa Millac 4VA Fanuc 6M M0185 -1 On Way 51.18" x 16.14" 32.28" x 14.17" x 19.09" 2,500 40 24 Table Travels RPM Taper ATC

8282 MACHINING CENTERS, VERTICAL, CNC 1997 Quantum Q-1500 V Quantum Very Good Yes 1997 Quantum Q-1500 V Quantum M0185 59,500.00 0 Yes 94" x 36" 62" x 34" x 32" 12,000 50 40 Table Travels RPM Taper ATC

6373 MACHINING CENTERS, VERTICAL, CNC 1990/05 Rambaudi Rammatic 1400 Siemens 802D Good Yes 1990/05 Rambaudi Rammatic 1400 Siemens 802D M0185 ######## -1 Yes 240" x 55" 240" x 50" x 50" 3,500 50 Table Travels RPM Taper ATC

7761 MACHINING CENTERS, VERTICAL, CNC 1997 Sharnoa HPM-40 Tiger 6 Very Good Yes 1997 Sharnoa HPM-40 Tiger 6 M0185 28,000.00 -1 Yes 47" x 21" 40" x 24" x 22" 8,000 40 30 Table Travels RPM Taper ATC

10346 MACHINING CENTERS, VERTICAL, CNC 1992 Sharnoa SVC-80 Tiger 5 Good Yes 1992 Sharnoa SVC-80 Tiger 5 M0185 29,500.00 0 Yes 82.6" x 33.8" 80" x 36" x 28" 3,600 50 20 Table Travels RPM Taper ATC

7757 MACHINING CENTERS, VERTICAL, CNC 1990 Sharnoa SV-36 Tiger 5 Very Good Yes 1990 Sharnoa SV-36 Tiger 5 M0185 22,000.00 -1 Yes 43" x 19" 30" x 20" x 22 4,000 40 24 Table Travels RPM Taper ATC

8805 MACHINING CENTERS, VERTICAL, CNC 1998 Supermax YCM-V218B Fanuc 18M Very Good Yes 1998 Supermax YCM-V218B Fanuc 18M M0185 ######## 0 Yes 90" x 30" 83" x 34"x 30" 4,000 50 30 Table Travels RPM Taper ATC

8873 MACHINING CENTERS, VERTICAL, CNC 1997 Supermax Max-1 Rebel Mitsubishi 520M Good Yes 33.07" x 16.54" Table, 25.59" x 16.14" x 24.21" Travels, 8,000 RPM, 10 HP, 40 Taper, 24 ATC, Side Mount Tool Change 1997 Supermax Max-1 Rebel Mitsubishi 520M M0185 14,500.00 0 Yes 33.07" x 16.54" 25.59" x 16.14" x 24.21" 8,000 40 16 Table Travels RPM Taper ATC

10421 MACHINING CENTERS, VERTICAL, CNC 1996 Supermax Max-8 Fanuc OM Very Good Yes 1996 Supermax Max-8 Fanuc OM M0185 55,500.00 -1 Yes 66.9" x 29.9" 65" x 30" x 30" 8,000 40 24 Table Travels RPM Taper ATC

8851 MACHINING CENTERS, VERTICAL, CNC 2001 Supermax V-2110B Fanuc 18M Very Good Yes 2001 Supermax V-2110B Fanuc 18M M0185 ######## 0 Yes 90.6" x 40.1" 82.6" x 40.1" x 30" 4,000 50 30 Table Travels RPM Taper ATC

10530 MACHINING CENTERS, VERTICAL, CNC 2004 Takumi-Seiki V15 EL Fanuc OiMB Very Good Yes 2004 Takumi-Seiki V15 EL Fanuc OiMB M0185 74,500.00 0 Yes 1 Table Travels RPM Taper ATC

8741 MACHINING CENTERS, VERTICAL, CNC 2006 Toyoda BM-1600 Fanuc 18iMB Very Good Yes 2006 Toyoda BM-1600 Fanuc 18iMB M0185 ######## 0 Yes 70.8" x 31.5" 63" x 31.5" x 27.5" 6,000 50 30 Table Travels RPM Taper ATC

10264 MACHINING CENTERS, VERTICAL, CNC W-PALLETS 1998 Daewoo DMV-400 APC Mitsubishi 520M Excellent Yes 1998 Daewoo DMV-400 APC Mitsubishi 520M M0185P -1 Yes 25.6" x 17.7" 22" x 15.7" x 22.4" 10,000 40 30 Table Travels RPM Taper ATC

10543 MACHINING CENTERS, VERTICAL, CNC W-PALLETS 1997 Daewoo DMV-400 APC Mitsubishi 520M Very Good Yes 1997 Daewoo DMV-400 APC Mitsubishi 520M M0185P 45,000.00 0 Yes 25.6" x 17.7" 22" x 15.7" x 22.4" 10,000 40 30 Table Travels RPM Taper ATC

10287 MACHINING CENTERS, VERTICAL, CNC W-PALLETS 1997 Daewoo DMV-400 APC Fanuc 18M Good Yes 1997 Daewoo DMV-400 APC Fanuc 18M M0185P 42,500.00 0 Yes 25.6" x 17.7" 22" x 15.7" x 22.4" 10,000 40 30 Table Travels RPM Taper ATC

9079 MACHINING CENTERS, VERTICAL, CNC W-PALLETS 2001 Fadal VMC-4020 APC Fadal 88HS Very Good Yes 2001 Fadal VMC-4020 APC Fadal 88HS M0185P 48,900.00 0 Yes 52" x 18" 40" x 20" x 20" 10,000 40 30 Table Travels RPM Taper ATC

10229 MACHINING CENTERS, VERTICAL, CNC W-PALLETS 1997 Haas VF-3 APC Haas 32 BIT Good Yes 1997 Haas VF-3 APC Haas 32 BIT M0185P 29,500.00 0 Yes 48" x 18" 40" x 20" x 25" 7,500 40 20 Table Travels RPM Taper ATC

10248 MACHINING CENTERS, VERTICAL, CNC W-PALLETS 2006 Haas VF-3 APC Haas 32 BIT Very Good Yes 2006 Haas VF-3 APC Haas 32 BIT M0185P 76,000.00 0 Yes 48" x 18" 40" x 20" x 25" 10,000 40 20 Table Travels RPM Taper ATC

9651 MACHINING CENTERS, VERTICAL, CNC W-PALLETS 1997 Haas VF-3 APC Haas 32 BIT Very Good Yes 1997 Haas VF-3 APC Haas 32 BIT M0185P 36,500.00 -1 Yes 48" x 18" 40" x 20" x 25" 10,000 40 20 Table Travels RPM Taper ATC

10550 MACHINING CENTERS, VERTICAL, CNC W-PALLETS 2003 Hardinge VMC-1000 II Fanuc 18M Very Good Yes 2003 Hardinge VMC-1000 II Fanuc 18M M0185P 59,500.00 0 Yes 44" x 20" 40.16" x 20.08" x 20.08" 12,000 40 20 Table Travels RPM Taper ATC

10379 MACHINING CENTERS, VERTICAL, CNC W-PALLETS 1995 Kitamura Mycenter-O Sparkchanger Yasnac MX-3 Good Yes 1995 Kitamura Mycenter-O Sparkchanger Yasnac MX-3 M0185P -1 On Way 18.1" x 12" 12" x 10" x 12" 7,500 40 16 Table Travels RPM Taper ATC

9623 MACHINING CENTERS, VERTICAL, CNC W-PALLETS 1996 Kitamura Mycenter-1 APC Fanuc OM Good Yes 1996 Kitamura Mycenter-1 APC Fanuc OM M0185P -1 Yes 30.94" x 13.97" 20" x 14" x 16" 13,000 35 20 Table Travels RPM Taper ATC

8486 MACHINING CENTERS, VERTICAL, CNC W-PALLETS 1998 Makino SNC-106 A30 Fanuc Pro 3 Very Good Yes 1998 Makino SNC-106 A30 Fanuc Pro 3 M0185P 46,500.00 0 Yes 43.3" x 23.62" 39.37" x 23.62" x 15.75" 15,000 40 30 Table Travels RPM Taper ATC

10525 MACHINING CENTERS, VERTICAL, CNC W-PALLETS 2004 Makino S33 Fanuc Pro 3 Very Good Yes 2004 Makino S33 Fanuc Pro 3 M0185P 77,000.00 0 Yes 23.6" x 15.7" 25.8" x 19.7" x 17.7" 13,000 40 30 Table Travels RPM Taper ATC

10509 MACHINING CENTERS, VERTICAL, CNC W-PALLETS 2006 Matsuura MAM72-3VS Fanuc 16iM Very Good Yes 2006 Matsuura MAM72-3VS Fanuc 16iM M0185P ######## 0 Yes 5.11" 26.5" x 15.5" x 26" 15,000 40 60 Table Travels RPM Taper ATC

10532 MACHINING CENTERS, VERTICAL, CNC W-PALLETS 2008 Mazak Variaxis 730-5X Mazatrol Matrix Like New Yes Two 24.8" x 19.6" Pallets, 28.7" x 33.4" x 22" Travels, 150° A-Axis, 10,000 RPM, 50 Taper, 120 ATC, Mazak Super Flow V8 Variable High Pressure Coolant, Renishaw NC-4 Laser Tool Measurement, Hydraulic Fixture Prep, Loaded With Options 2008 Mazak Variaxis 730-5X Mazatrol Matrix M0185P ######## -1 Yes 24.8" x 19.6" 28.7" x 33.4" x 22" 10,000 50 120 Table Travels RPM Taper ATC

8257 MACHINING CENTERS, VERTICAL, CNC W-PALLETS 2006 Mikron HSM 600U Heidenhain iTNC530 Very Good Yes 2006 Mikron HSM 600U Heidenhain iTNC530 M0185P ######## 0 No 11.81" x 11.81" 31.5" x 23.62" x 19.68" 36,000 50 170 Table Travels RPM Taper ATC

10375 MACHINING CENTERS, VERTICAL, CNC W-PALLETS 1991 Mori-Seiki MV-40 APC Fanuc OMC Good Yes 35.3" x 18" Table, 22" x 16.15" x 18.12" Travels, 8,000 RPM, 40 Taper, 22 HP, Very Low Hours 1991 Mori-Seiki MV-40 APC Fanuc OMC M0185P 39,500.00 0 Yes 43.3" x 17.7" 31.5" x 16.15" x 20.1" 8,000 40 30 Table Travels RPM Taper ATC

10352 MACHINING CENTERS, VERTICAL, CNC W-PALLETS 1996 Mori-Seiki M-300A1 Fanuc MF-M6 Good Yes 1996 Mori-Seiki M-300A1 Fanuc MF-M6 M0185P 55,000.00 0 Yes 12.4" x 12.4" 15.7" x 11.8" x 19.4" 10,000 40 40 Table Travels RPM Taper ATC

10376 MACHINING CENTERS, VERTICAL, CNC W-PALLETS 1993 Mori-Seiki MV-40 APC Fanuc MF-M4 Good Yes 35.3" x 18" Table, 22" x 16.15" x 18.12" Travels, 8,000 RPM, 40 Taper, 22 HP, Very Low Hours 1993 Mori-Seiki MV-40 APC Fanuc MF-M4 M0185P 34,500.00 0 Yes 35.3" x 15" 31.5" x 16.15" x 20.1" 7,500 40 20 Table Travels RPM Taper ATC

10345 MILLERS, CAM 1995 Awea SP-3016 Fanuc OMC Good Yes 1995 Awea SP-3016 Fanuc OMC M1204 99,500.00 0 Yes 1 Table Travels RPM HP Taper

8848 MILLERS, PLANER TYPE (Including Millers, Slab) 1953 Rockford 36" x 21" Very Good Yes 1953 Rockford 36" x 21" M2050 8,000.00 -1 Yes 36" x 21" 36" x 30" x 23" 30 Table Travels RPM HP Taper

9730 MILLERS, PLANER TYPE, BRIDGE STYLE Futurmill 72" x 240" Good Yes Futurmill 72" x 240" M2050B 0 Yes 72" x 240" 84" x 72" x 240" 566 30 50 Table Travels RPM HP Taper

8112 MILLERS, PLANER TYPE, BRIDGE STYLE 1968 Gray-Futurmill 64" x 288" Very Good Yes 1968 Gray-Futurmill 64" x 288" M2050B ######## 0 Yes 64" x 288" 73" x 52" x 288" 900 30 50 Table Travels RPM HP Taper

8115 MILLERS, PLANER TYPE, BRIDGE STYLE 1965 Gray-Futurmill 38" x 360" Good Yes 1965 Gray-Futurmill 38" x 360" M2050B ######## 0 Yes 38" x 360" 73" x 360" 890 30 50 Table Travels RPM HP Taper

9877 MILLERS, PLANER TYPE, OPENSIDE Futurmill 72" x 240" Very Good Yes Futurmill 72" x 240" M2050O 64,000.00 0 Yes 72" x 240" 84" x 72" x 240" 566 30 50 Table Travels RPM HP Taper

5758 MILLERS, UNIVERSAL 1982 Bridgeport Series I Fair Yes 1982 Bridgeport Series I M2680 3,500.00 -1 Yes 48" x 9" 36" x 12" x 16" 4,200 2 Table Travels RPM HP Taper

9288 MILLERS, UNIVERSAL 1994 Bridgeport Series I Good Yes 1994 Bridgeport Series I M2680 8,500.00 0 Yes 48" x 9" 32" x 12" x 5" 4,200 2 R 8 Table Travels RPM HP Taper

8732 MILLERS, UNIVERSAL 1991 Bridgeport Series I Very Good Yes 1991 Bridgeport Series I M2680 6,500.00 0 Yes 48" x 9" 30" x 12" x 5" 4,200 2 R 8 Table Travels RPM HP Taper

8943 MILLERS, UNIVERSAL 1980 Bridgeport Series I Good Yes 1980 Bridgeport Series I M2680 4,500.00 0 Yes 42" x 9" 30" x 12" x 5" 4,200 2 R 8 Table Travels RPM HP Taper

8952 MILLERS, UNIVERSAL 1979 Bridgeport Series I Good Yes 1979 Bridgeport Series I M2680 4,200.00 0 Yes 48" x 9" 36" x 12" x 5" 4,200 2 R 8 Table Travels RPM HP Taper

8704 MILLERS, VERT-UNIVERSAL NC and CNC 2002 Birmingham B3VS Centroid M 400 Very Good Yes 60" x 12" Table, 41" x 20" x 23" Travels, 5,160 RPM, 5 HP, 40 Taper, Engraving Software, Hard Drive, 128 MB Ram, RS-232 & Ethernet Ports, Inverter Drive System, 3.5" Floppy, Remote Jog Hand Wheel for X, Y, Z & 4th, Power Draw Bar, Digitizing Probe & Software, TT-1 Probe for Tool Measuring, Unlimited File Size Software, BobCadCam Design Software, Laser Mapping of Ballscrews ISO 1725 Certification 2002 Birmingham B3VS Centroid M 400 M2833 -1 Yes 60" x 12" 41" x 20" x 5" 5,160 5 40 Table Travels RPM HP Taper

8727 MILLERS, VERT-UNIVERSAL NC and CNC 1997 Bridgeport EZ-Trak DX Series I Bridgeport DX-32 VeryGood Yes 1997 Bridgeport EZ-Trak DX Series I Bridgeport DX-32 M2833 12,500.00 0 Yes 48" x 9" 30" x 12" x 5" 4,200 2 R 8 Table Travels RPM HP Taper

8752 MILLERS, VERT-UNIVERSAL NC and CNC 1996 Bridgeport BV 2XT Bridgeport DX-32 Excellent Yes 1996 Bridgeport BV 2XT Bridgeport DX-32 M2833 14,500.00 0 Yes 48" x 9" 30" x 12" x 5" 4,200 2 40 Table Travels RPM HP Taper

9042 MILLERS, VERT-UNIVERSAL NC and CNC 1998 Hurco Hawk 40 Advantage Series Ultramax IV/Dual CRT Good Yes 58" x 13" Table, 40" x 20" x 20" Travels, 4,000 RPM, 5 HP, Power Draw Bar, Hardened and Ground Box Ways, DFX Translator 1998 Hurco Hawk 40 Advantage Series Ultramax IV/Dual CRT M2833 22,000.00 -1 Yes 58" x 13" 40" x 20" x 20" 4,000 5 40 Table Travels RPM HP Taper

9787 MILLERS, VERT-UNIVERSAL NC and CNC 2000 Milltronics MB-19 Centurion 6 SLS Very Good Yes 2000 Milltronics MB-19 Centurion 6 SLS M2833 16,000.00 0 Yes 50" x 13" 32" x 19" x 22.5" 5,000 10 40 Table Travels RPM HP Taper

10348 MILLERS, VERT-UNIVERSAL NC and CNC 1999 Southwestern Industries Prototrak K3 Proto Trak A.G.E. III Very Good Yes 1999 Southwestern Industries Prototrak K3 Proto Trak A.G.E. III M2833 14,500.00 0 Yes 50" x 10" 32" x 16" x 16" 4,200 3 R 8 Table Travels RPM HP Taper

10404 MILLERS, VERT-UNIVERSAL NC and CNC 2007 Southwestern Industries Prototrak K3 EMX Control Very Good Yes 2007 Southwestern Industries Prototrak K3 EMX Control M2833 13,000.00 0 Yes 50" x 10" 32" x 16" x 16" 4,200 3 R 8 Table Travels RPM HP Taper

10029 MILLERS, VERT-UNIVERSAL NC and CNC 1999 Southwestern Industries DPM Proto Trak A.G.E. III Good Yes 1999 Southwestern Industries DPM Proto Trak A.G.E. III M2833 17,500.00 0 Yes 50" x 10" 31" x 17" x 23.5" 4,200 3 40 Table Travels RPM HP Taper

10054 MILLERS, VERT-UNIVERSAL NC and CNC 2001 Southwestern Industries DPM Proto Trak A.G.E. III Very Good Yes 2001 Southwestern Industries DPM Proto Trak A.G.E. III M2833 19,500.00 0 Yes 50" x 10" 31" x 17" x 23.5" 4,200 3 40 NMTB Table Travels RPM HP Taper

7853 MILLERS, VERT-UNIVERSAL NC and CNC 1985 Tree Journeyman 325 Delta Dynapath 20M/CRT Good Yes 44" x 10" Table, 27" x 14" x 6" x 15.75" Travels, 6,000 RPM, 5 HP, 40 Taper, 4th Axis Rotary Table 1985 Tree Journeyman 325 Delta Dynapath 20M/CRT M2833 7,500.00 -1 Yes 44" x 10" 27" x 14" x 6" 3,500 3 40 Table Travels RPM HP Taper

8618 MIXERS, LIQUID 1988 De Dietrich Mixer Good Yes 1988 De Dietrich Mixer M3249 10,500.00 -1 Yes 1 Capacity Tank Opening Speed HP

10587 PRESSES, O.B.I. 1980/2005 Minster Hummingbird Very Good Yes 1980/2005 Minster Hummingbird P6150 29,500.00 -1 Yes 30 31" x 20" 1.26" 1,300 15 Tons Bed Ram SPM HP

9811 PRESSES, O.B.I. 1989 Rousselle 2F Good Yes 15 Tons, 11" x 16" Bed, 5" x 5" Bed Opening, 8" Shut Height, 12" Throat, 2" Stroke, 160 SPM, 1.5" Ram Adjustment, Air Clutch and Brake, Dual Palm Safety Buttons, Safety Cage Around Opening 1989 Rousselle 2F P6150 2,500.00 -1 Yes 15 11" x 16" 1.5" 160 15 Tons Bed Ram SPM HP

8368 PRESSES, SSDC 1984 Verson 150-B2-60 Very Good Yes 1984 Verson 150-B2-60 P7135 34,500.00 0 Yes 150 60" x 36" 60" x 36" 70 35 Tons Bed Ram SPM HP

8370 PRESSES, SSDC 1968 Verson OBG Very Good Yes 1968 Verson OBG P7135 24,500.00 0 Yes 150 50" x 30" 34" x 24" 35 35 Tons Bed Ram SPM HP

8367 PRESSES, STRAIGHT SIDE, CRANKLESS 1966 Miller C-150 Very Good Yes 1966 Miller C-150 P7125 49,500.00 0 Yes 150 50" x 33" 34" x 24" 40 15 Tons Bed Ram SPM HP

8829 ROLLS, ANGLE BENDING 1975 Buffalo 2 VBR Good Yes 1975 Buffalo 2 VBR R4704 22,500.00 -1 Yes 5" x 5" x 3/8" 6" x 3/4" 2 3/4" 35 20 Angle Out Flat Round FPM HP

8806 ROLLS, ANGLE BENDING Roundo R-4S Very Good Yes Roundo R-4S R4704 34,500.00 0 Yes 4" x 4" x 3/8" 5" x 5/8" / 4" x 1" 4" 40 12 Angle Out Flat Round FPM HP

9170 ROLLS, ANGLE BENDING 1996 Roundo R-13-S Very Good Yes Angle Bend Capacity - 8" x 8" x 1 - 1/4", Diameter of Bending Rolls 32", 108 HP, Large Selection of Dies For Pipe and Beams, Large Selection of Spacers, Oversized Shaft, Motors & Drive, Hydraulically Controlled Guide Rolls - Up / Down / In & Out, Full Pendant Control, Five (5) Sets of Pipe Rolls 1996 Roundo R-13-S R4704 ######## -1 Yes 8" x 8" x 1 - 1/4" 16" x 2-3/8" 10 1/2" 108 Angle Out Flat Round FPM HP

9264 ROLLS, ANGLE BENDING Roundo R-4M Rebuilt Yes Roundo R-4M R4704 39,500.00 0 Yes 3 1/2" x 3 1/2" x 3/8" 7" x 1" 3" 23 8.6 Angle Out Flat Round FPM HP

9109 ROLLS, PLATE BENDING, INITIAL PINCH 1976/2003 Bertsch Model 14 Very Good Yes 1976/2003 Bertsch Model 14 R5603 ######## 0 Yes 120" 1" 15" 15" 30 Length Thinkness Roll Dia. Top Roll Dia. Bot. HP

8659 ROLLS, PLATE BENDING, INITIAL PINCH 2009 Birlik HSM 4 New Yes 2009 Birlik HSM 4 R5603 ######## 0 Yes 122" 1" 16.54" 12.99" 40 Length Thinkness Roll Dia. Top Roll Dia. Bot. HP

8664 ROLLS, PLATE BENDING, INITIAL PINCH 2009 Cole-Tuve PRH-10-380 New Yes 2009 Cole-Tuve PRH-10-380 R5603 ######## -1 120" 1" 14.96" 14.96" 39 Length Thinkness Roll Dia. Top Roll Dia. Bot. HP

8720 ROLLS, PLATE BENDING, INITIAL PINCH 2009 Cole-Tuve 4RS-10-380 New No 2009 Cole-Tuve 4RS-10-380 R5603 ######## -1 Yes 120" 1" 14.96" 14.18" 39 Length Thinkness Roll Dia. Top Roll Dia. Bot. HP

7993 ROLLS, PLATE BENDING, INITIAL PINCH 1994 Montgomery RS8-10 Very Good Yes 1994 Montgomery RS8-10 R5603 29,500.00 0 Yes 96" 3/8" 10" 10" 20 Length Thinkness Roll Dia. Top Roll Dia. Bot. HP

8735 ROLLS, PLATE BENDING, INITIAL PINCH 1956 Webb 6L Very Good Yes 6' Roll Length, 1/2" Mild Steel Cap. 9" Roll Dia., 10 HP, Three (3) Rolls Power Driven, Magnetic Brake Motor, Variable Rolling Speed, Rear Roll Adjust, Manual Pinch Roll Adjust, Drive System Work Done On Machine Recently, Machine Is Tight and Right 1956 Webb 6L R5603 23,500.00 -1 Yes 72" 1/2" 9" 9" 10 Length Thinkness Roll Dia. Top Roll Dia. Bot. HP

8414 ROLLS, PLATE BENDING, INITIAL PINCH Webb 6L Good Yes Webb 6L R5603 19,500.00 0 Yes 72" 1/2" 9" 9" 10 Length Thinkness Roll Dia. Top Roll Dia. Bot. HP

9692 ROLLS, PLATE BENDING, PYRAMID TYPE 2010 Cole-Tuve 3R-UHS-10-400 New No 2010 Cole-Tuve 3R-UHS-10-400 R5610 ######## -1 Yes 122" 1 3/8" 15.74" 14.77" 52 Length Thickness Roll Dia. Top Roll Dia. Bot HP

9734 ROLLS, PLATE BENDING, PYRAMID TYPE 2010 Cole-Tuve 3R-UHS-10-450 New No 2010 Cole-Tuve 3R-UHS-10-450 R5610 ######## -1 Yes 122" 1 3/4" 17.71" 16.53" 65 Length Thickness Roll Dia. Top Roll Dia. Bot HP

9735 ROLLS, PLATE BENDING, PYRAMID TYPE 2010 Cole-Tuve 3R-UHS-10-500 New No 2010 Cole-Tuve 3R-UHS-10-500 R5610 ######## -1 Yes 122" 2" 19.69" 18.11" 78 Length Thickness Roll Dia. Top Roll Dia. Bot HP

9105 ROLLS, PLATE BENDING, PYRAMID TYPE 1980 Kumla PV7H Very Good Yes 1980 Kumla PV7H R5610 59,500.00 0 Yes 120" 5/8" 11.5" 11.5" 15 Length Thickness Roll Dia. Top Roll Dia. Bot HP

8657 ROLLS, PLATE BENDING, PYRAMID TYPE 1982 Roundo PS 255/10 Good Yes 1982 Roundo PS 255/10 R5610 52,500.00 0 Yes 120" 1/2" 10.4" 10.4" 10 Length Thickness Roll Dia. Top Roll Dia. Bot HP

9106 ROLLS, PLATE BENDING, PYRAMID TYPE 1985 Roundo PS-360 Good Yes 1985 Roundo PS-360 R5610 89,500.00 0 Yes 168" 5/8" 14.17" 14.17" 36 Length Thickness Roll Dia. Top Roll Dia. Bot HP

9875 ROLLS, PLATE BENDING, PYRAMID TYPE 1990 Roundo PS255 Very Good Yes 1990 Roundo PS255 R5610 56,500.00 0 Yes 122" 7/16" 10.04" 10.04" 5 Length Thickness Roll Dia. Top Roll Dia. Bot HP

6729 ROUTERS, NC and CNC 2003 AXYZ Automation Model 4010 Good Yes 168" x 16" Table, 150" x 16" x 18" Travels, 24,000 RPM, 30 Taper, 10 HP, Fog Buster Dual Wand Mister Lubricator, Desoutter AFDE430 Electric Drill with Pneumatic Ram, S-Mouse Rapid Material Surface / Tool Tip Sensor, Toolpath For Windows Interface Software C/W 2D & 3D Engraving Module, Remote Jog Handle 2003 AXYZ Automation Model 4010 R8906 22,000.00 -1 Yes 1 Table Travels RPM Taper HP

10382 ROUTERS, NC and CNC 1997 Skoda Fanuc 16M Very Good Yes 1997 Skoda Fanuc 16M R8906 ######## -1 Yes 1 Table Travels RPM Taper HP

8358 SAWS, BAND, HORIZONTAL 1988 Amada H-450H Good Yes 1988 Amada H-450H S0653 6,950.00 0 Yes 16" x 17.7" 16" 1.5" x .05" x 15' 4" 66 - 393 5 Square Round Blade FPM HP

9946 SAWS, BAND, HORIZONTAL 1998 Behringer HBP-360 / 704 GA Good Yes 1998 Behringer HBP-360 / 704 GA S0653 39,500.00 -1 Yes 27.5" x 13.4" 14.2" / 13.4" 1.5" x .050" x 17' 9" 75 - 510 7.4 Square Round Blade FPM HP

8733 SAWS, BAND, HORIZONTAL 1997 Behringer HBP-430A Very Good Yes 1997 Behringer HBP-430A S0653 29,500.00 0 Yes 16.93" x 16.93" 16.93" 1.97" x .050" x 228" 55 - 360 10 Square Round Blade FPM HP

8837 SAWS, BAND, HORIZONTAL Behringer KV-60 Good Yes Behringer KV-60 S0653 32,500.00 0 Yes 30" x 20" 20" 2.25" x .050" x 289" 55 - 360 7.5 Square Round Blade FPM HP

8973 SAWS, BAND, HORIZONTAL 1997 Behringer HBP-360 / 704 GA Good Yes 1997 Behringer HBP-360 / 704 GA S0653 60,000.00 0 Yes 27.5" x 13.4" 14.2" / 13.4" 1.5" x .050" x 17' 9" 75 - 510 7.4 Square Round Blade FPM HP

8723 SAWS, BAND, HORIZONTAL 1990 Daito GA-600B Very Good Yes 1990 Daito GA-600B S0653 39,500.00 0 Yes 24" x 27" 24" 2" x .05" x 268" 33 - 396 10 Square Round Blade FPM HP

10388 SAWS, BAND, HORIZONTAL 1995 Daito GA260W Good Yes 1995 Daito GA260W S0653 7,900.00 -1 Yes 11 7/8" x 10 1/4" 10 1/4" 1 1/4" x .042" x 138" 66 - 525 5 Square Round Blade FPM HP

9641 SAWS, BAND, HORIZONTAL Dake LE10A Good Yes Dake LE10A S0653 9,750.00 0 Yes 7" x 12" 10" 1" x .035" x 145" 27 - 262 3 Square Round Blade FPM HP

9323 SAWS, BAND, HORIZONTAL 1975 Do-All C-80 Good Yes 9" x 16" Capacity, 10 3/4" Round, 275 FPM, 2 HP, Work Light, Manual Vise, In-Feed Roller Table 1975 Do-All C-80 S0653 4,500.00 -1 Yes 9" x 16" 10 3/4" 1.25" x .042" x 188" 0 - 275 2 Square Round Blade FPM HP

9652 SAWS, BAND, HORIZONTAL 1997 Do-All C-916 SA Very Good Yes 9" x 16" Capacity, 10 3/4" Round, 275 FPM, 2 HP, 45° Miter, Work Light, Manual Vise, In-Feed Roller Table 1997 Do-All C-916 SA S0653 14,000.00 0 Yes 9" x 16" 10 3/4" 1" x .035" x 172" 105 - 275 2 Square Round Blade FPM HP

9172 SAWS, BAND, HORIZONTAL 2005 HEM H105 LA-C Very Good Yes 2005 HEM H105 LA-C S0653 28,500.00 0 Yes 20" x 16" 16" 1.25" x .042" x 188" 120 - 800 7.5 Square Round Blade FPM HP

10494 SAWS, BAND, HORIZONTAL 2000 HEM Twister Good Yes 2000 HEM Twister S0653 10,500.00 0 Yes 14" x 20" 13" / 8" / 12" 1 1/4" x .042" x 180" 60 - 300 5 Square Round Blade FPM HP

9628 SAWS, BAND, HORIZONTAL 2000 HEM Twister Good Yes 2000 HEM Twister S0653 8,950.00 0 Yes 14" x 20" 13" / 8" / 12" 1.25" x .042" x 180" 65 - 300 5 Square Round Blade FPM HP

9781 SAWS, BAND, HORIZONTAL 2007 Hyd-Mech S-20DS Very Good Yes 2007 Hyd-Mech S-20DS S0653 10,500.00 0 Yes 13" x 18" 13" / 8" / 12" 1" x .042" x 177" 65 - 350 2 Square Round Blade FPM HP

9653 SAWS, BAND, HORIZONTAL 1998 Hyd-Mech S-20S Very Good Yes 1998 Hyd-Mech S-20S S0653 14,000.00 0 On Way 13" x 18" 13" / 8" / 12" 1" x .032" x 177" 65 - 370 3 Square Round Blade FPM HP

10488 SAWS, BAND, HORIZONTAL 1979 Kysor-Johnson HA-16 Good Yes 1979 Kysor-Johnson HA-16 S0653 12,500.00 0 Yes 16" x 16" 16" 1 1/4" x .042" x 180" 80 - 297 5 Square Round Blade FPM HP

10493 SAWS, BAND, HORIZONTAL 1995 Marvel Model 15A Very Good Yes 1995 Marvel Model 15A S0653 24,500.00 0 Yes 16" x 16" 16" x 16" 1 1/4" x .035" x 186" 55 - 400 7.5 Square Round Blade FPM HP

9764 SAWS, BAND, HORIZONTAL 1988 Peerless HB-915A Good Yes 1988 Peerless HB-915A S0653 6,500.00 -1 Yes 9" x 15" 15" 1 1/2" x .050" x 180" 80 - 400 7.5 Square Round Blade FPM HP

8345 SAWS, BAND, HORIZONTAL 1979 Summit 500 SA Fair Yes 1979 Summit 500 SA S0653 12,500.00 0 Yes 20" 12 3/4" 1 1/4" 50 - 450 5 Square Round Blade FPM HP

9543 SAWS, BAND, VERTICAL Dake VH-24 Very Good Yes Dake VH-24 S0690 39,500.00 0 Yes 1 13" 183" / 1" / .03125" 50 - 4,250 2 Throat Max. Height Blade FPM HP

8910 SAWS, BAND, VERTICAL 1980 Do-All TF2020M Fair Yes 1980 Do-All TF2020M S0690 10,500.00 0 Yes 1 20" 192" / 1.5" / .042" 300 10 Throat Max. Height Blade FPM HP

8912 SAWS, BAND, VERTICAL 1986 Do-All TF-1421 Good Yes 1986 Do-All TF-1421 S0690 10,500.00 0 Yes 1 14" 171" / 1" / .035" 275 2 Throat Max. Height Blade FPM HP

8899 SAWS, BAND, VERTICAL 1995 HEM V-100 LM-2 Very Good Yes 1995 HEM V-100 LM-2 S0690 15,500.00 0 Yes 1 18" 14' 3"' / 1 1/4" / .042" 400 5 Throat Max. Height Blade FPM HP

8903 SAWS, BAND, VERTICAL 1991 HEM V-100A Good Yes 1991 HEM V-100A S0690 11,900.00 0 Yes 1 18" 14' 3"' / 1" / .042" 300 2 Throat Max. Height Blade FPM HP

7756 SAWS, BAND, VERTICAL 1998 Marvel Series 8 Mark II Very Good Yes 1998 Marvel Series 8 Mark II S0690 11,500.00 0 Yes 1 18" 1" x 14' 6" 450 2 Throat Max. Height Blade FPM HP

8902 SAWS, BAND, VERTICAL 1996 Marvel Series 8 Mark II Very Good Yes 1996 Marvel Series 8 Mark II S0690 13,500.00 0 Yes 1 18" 1" x 14' 6" 450 Throat Max. Height Blade FPM HP

8909 SAWS, BAND, VERTICAL 1992 Peerless VB1820XL Fair Yes 1992 Peerless VB1820XL S0690 11,500.00 0 Yes 1 18" 174" / 1" / .035" 400 5 Throat Max. Height Blade FPM HP

8911 SAWS, BAND, VERTICAL Peerless VB 1820 U Very Good Yes Peerless VB 1820 U S0690 10,500.00 0 Yes 1 18" 174" / 1" / .035" 400 4 Throat Max. Height Blade FPM HP

9146 SHEARS, HYDRAULIC 1980 Allsteel 20' x 3/4" Very Good Yes 20" Bed, 3/4" Mild Steel Cap., 1/2" Stainless Cap., 60 HP, Three (3) 36" Front Sheet Supports, Fourteen (14) Independent Hydraulic Holddowns, Finger Guards, T-Slotted Bed 1980 Allsteel 20' x 3/4" S4105H ######## -1 Yes 20' 3/4" 15" 36 60 Length Thickness Throat SPM HP

10424 SHEARS, MECHANICAL 19?? Niagara 18-6 Good Yes 19?? Niagara 18-6 S4105M 0 Yes 6' 3/8" 55 15 Length Thickness Throat SPM HP

8272 SMOKE COLLECTORS 2002 Aercology ETP 2600 DX2 Good No 2002 Aercology ETP 2600 DX2 S8300 0 Yes 1 CFM Motor

9774 TABLES, NC and CNC 2005 Haas TR-210H Very Good No 2005 Haas TR-210H T0130 26,500.00 -1 Yes 8.3" 360,000° 0° Table Indexing Tilt

10567 TABLES, NC and CNC 1997 Haas HRT-210 Good Yes 1997 Haas HRT-210 T0130 3,850.00 0 Yes 8.26" 360,000° 0° Table Indexing Tilt

10462 TABLES, NC and CNC 2007 Haas HRT-310 Excellent Yes 12.2" Table, A-Frame Support, Haas Tombstone (6" x 6" x 19") 2007 Haas HRT-310 T0130 11,500.00 0 Yes 12.2" 360,000° 0° Table Indexing Tilt

10464 TABLES, NC and CNC 2008 Haas HA-5C2C Like New Yes 2008 Haas HA-5C2C T0130 11,000.00 0 Yes Collet 360,000° 0° Table Indexing Tilt

10568 TABLES, NC and CNC 2004 Haas HRT-160 Very Good Yes 2004 Haas HRT-160 T0130 6,500.00 -1 Yes 6.29" 360,000° 0° Table Indexing Tilt

9023 TABLES, NC and CNC 2001 Haas TR-110 Very Good Yes 2001 Haas TR-110 T0130 16,000.00 -1 Yes 4.33" 360,000° 0° Table Indexing Tilt

9947 TABLES, NC and CNC 1997 Haas HRT-210 Good No 8.26" T-Slotted Table, 360,000°, Brushless Style 1997 Haas HRT-210 T0130 6,000.00 0 Yes 8.26" 360,000° 0° Table Indexing Tilt

10296 TABLES, NC and CNC 2004 Haas HA-5C4 Very good No 2004 Haas HA-5C4 T0130 12,000.00 0 On Way Collet 360,000° 0° Table Indexing Tilt

9418 TABLES, NC and CNC 2006 Haas HA-5C Very Good Yes 2006 Haas HA-5C T0130 -1 On Way Collet 360,000° 0° Table Indexing Tilt

5081 TABLES, NC and CNC 2003 Kitagawa TR-320 Excellent Yes 12.60" Table, 3.93" Through Hole, 11.1 RPM 2003 Kitagawa TR-320 T0130 17,000.00 -1 Yes 12.60" 360,000° 0° Table Indexing Tilt

8592 TABLES, NC and CNC MMK TecNara MD-300 R Excellent Yes MMK TecNara MD-300 R T0130 15,000.00 0 Yes 12.60" 360,000° 0° Table Indexing Tilt

7101 TABLES, NC and CNC 1968 Ohio 72" Very Good Yes Table Size (T-Slotted) - 72", 360,000°, Full Brake, Shot Pins at 90° 1968 Ohio 72" T0130 11,500.00 -1 Yes 72" 360,000° 0° Table Indexing Tilt

8165 TABLES, ROTARY Bullard 48" x 48" Good Yes Bullard 48" x 48" T0140 7,950.00 0 Yes 48" x 48" 1° Hydraulic 20,000 Lbs Table Indexing Type Weight Cap.

Quick Links