Machine Tools 24-7

Phone 352-799-8398 - Fax 352-799-0315

sales@machinetools247.com

 www.machinetools247.com

At Machine Tools 24-7 we never stop working to serve your machine tool needs

Use Space Provided Below For Your Notes on This Machine Quote - When Ready - Click File - Then Print on your Browser

Machine Tools 24-7 Machine Quote - Click on the Machine ID Number Below to View Then Print Machine Photos 

Below are the specs we have on file for this machine.  Please contact Machine Tools 24-7 if you have any questions.

Machine IDYearManufacturerModelControl
139711993Mitsui-SeikiJIDIC-H6CFanuc 15M

 DescriptionSpec Values
Pallet:Pallet Size (2 Pallets)31.5" x 31.5"
 Pallet Indexing / Table Load360,000° / 1,100 Lbs
Travels:X-Axis Travel51.2"
 Y-Axis Travel39.4"
 Z-Axis Travel39.4"
 B-Axis Travel360,000°
Spindle:Spindle Speeds Minimum - Maximum20 - 3,150 RPM
 Spindle Taper50 Taper
 Main Motor (30 min / continuous)25 / 20 HP
 Spindle Center to Table Top3.9" - 39.4"
Tool Changer:Tool Changer Positions120 ATC
 Tool Change Time (Tool-to-Tool / Chip-to-Chip)1.7 / 4.5 Sec.
Rapids:Rapid Traverse (X, Y & Z )742 IPM
 Feed Rate0.01 - 393 IPM
Dimensions:Floor Space (L x W x H)275" x 216" x 156"
 Weight (approx.)70,500 Lbs

 Equipped With
Additional Info.:Floodd Coolant
 Remote Jog Handle
 Spindle Chiller
 Chip Conveyor
 Chip Auger
 Accuracy of a Jig Mill
 Tool Touch Probe
 Color CRT
 Machine Can Handle 39.4" Pallets
 Coolant Through Spindle
 Two (2) Speed Geared Head

Type Your Notes About This Machine In The Space Below Before Printing

TERMS: Cash or Cashiers Check with order, and all equipment is FOB on floor from sold location unless otherwise stated. All equipment subject to prior sales and is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold "As Is, Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties, which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. -EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use, operation or set-up, and to adequately safeguard the equipment conform to all Federal, State and Local Government Safety Standards and all Industrial Standards. - INDEMNIFICATION: Buyer/User agrees to Indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment on the face hereof. All equipment quoted is subject to prior sale. It is purchasers responsibility to verify machine condition, specifications and pay any and all applicable taxes.