Machine Tools 24-7
Phone 352-799-8398 - Fax 352-799-0315
sales@machinetools247.com
www.machinetools247.com
At Machine Tools 24-7 we never stop working to serve
your machine tool needs
Use Space Provided Below For Your Notes on This Machine Quote
- When Ready - Click File - Then Print on your Browser
Machine Tools 24-7 Machine Quote - Click on the
Machine ID Number Below to View Then Print Machine Photos
Below are the specs we have on file for this machine.
Please contact Machine Tools 24-7 if you have any
questions.
| Machine ID | Year | Manufacturer | Model | Control |
| 16611 | 2013 | Haas | VF-6-40 | Haas Control |
| | Description | Spec Values |
| Table: | Table Size | 64" x 28" |
| | Maximum Table Load | 4,000 Lbs |
| Travels: | X-Axis Travel | 64" |
| | Y-Axis Travel | 32" |
| | Z-Axis Travel | 30" |
| | Spindle Nose to Table Top | 5" - 43" |
| Spindle: | Spindle Speeds Minimum - Maximum | 100 - 8,100 RPM |
| | Spindle Taper | 40 Taper |
| | Main Motor | 20 HP |
| Tool Changer: | Tool Changer Positions (side mount) | 30 ATC |
| Rapids: | Rapid Traverse (X, Y & Z) | 600 IPM |
| | Feed Rate | 500 IPM |
| Dimensions: | Floor Space (L x W x H) | 178" x 123" x 125" |
| | Weight (approx.) | 27,000 Lbs |
| | Equipped With |
| Additional Info.: | Programmable Coolant |
| | Chip Auger |
| | Rigid Tapping |
| | 8" Z-Clearance Riser |
| | Two (2) Speed Geared Head |
| | Haas HRT-310 Rotary Table |
| | Coolant Through Spindle |
| | Enhanced Remote Jog Handle |
| | 4th Axis Interface |
| | Ethernet Port |
| | 750 Meg Expanded Memory |
| | Second Home Position |
| Note: | Very Low Hours |
Type Your Notes About This Machine In The Space
Below Before Printing
TERMS: Cash or Cashiers Check with order,
and all equipment is FOB on floor from sold location unless
otherwise stated. All equipment subject to prior sales and is
exclusive of any government tax. Equipment descriptions are intended
only as a guide and their accuracy is not guaranteed. CONDITIONS:
Item(s) are sold "As Is, Where Is" unless other arrangements have
been made and conveyed in writing. There are no warranties, which
extend beyond the description on the face hereof; quotation subject
to change without notice. All agreements and/or contracts made by
sales person are subject to approval. -EQUIPMENT SAFETY: It is the
buyer's/user's responsibility to provide proper safety devices and
equipment to safeguard persons from harm resulting from any
particular use, operation or set-up, and to adequately safeguard the
equipment conform to all Federal, State and Local Government Safety
Standards and all Industrial Standards. - INDEMNIFICATION:
Buyer/User agrees to Indemnify and hold harmless Seller and
Salespersons from any and all claims or liabilities caused by or
arising from the equipment on the face hereof. All equipment quoted
is subject to prior sale. It is purchasers responsibility to verify
machine condition, specifications and pay any and all applicable
taxes.