Machine Tools 24-7
Phone 352-799-8398 - Fax 352-799-0315
sales@machinetools247.com
www.machinetools247.com
At Machine Tools 24-7 we never stop working to serve
your machine tool needs
Use Space Provided Below For Your Notes on This Machine Quote
- When Ready - Click File - Then Print on your Browser
Machine Tools 24-7 Machine Quote - Click on the
Machine ID Number Below to View Then Print Machine Photos
Below are the specs we have on file for this machine.
Please contact Machine Tools 24-7 if you have any
questions.
| Machine ID | Year | Manufacturer | Model | Control |
| 16523 | 2014 | Mitsubishi | MV1200S MD+ Pro III | Mitsubishi |
| | Description | Spec Values |
| Table: | Table Length x Width | 25.2" x 17.7" |
| | Maximum Table Load | 1,102 Lbs |
| Travels: | X-Longitudinal | 15.7" |
| | Y-Cross | 11.8" |
| | Z-Vertical | 8.7" |
| | U - V Travels | +/- 2.4" |
| Tank: | Tank Length x Width x Depth | 34" x 29" x 10" |
| | Maximum Work Piece | 31.9" x 27.6" x 8.5" |
| | Maximum Cutting Speed | 28 Sq In / Hour |
| | Tank Capacity | 145 Gallons |
| Wire: | Wire Diameter Range / Minimum Start Hole | .004" - .012" / .002" |
| | Maximum Wire Spool Weight | 22.2 Lbs |
| Taper: | Tapers Angle | 15° @ 8" / 45° @ 1.8" |
| Rapids: | Rapid Traverse | 51.2 IPM |
| Resolution: | Resolution Rate | 0.000002" |
| Dimensions: | Floor Space (L x W x H) | 107" x 80" x 80" |
| | Weight (approx.) | 6,000 Lbs |
| | Equipped With |
| Additional Info.: | Submersible Operation |
| | Full Five Axis Control |
| | Tension Meter |
| | Absolute Position Detection System |
| | Wire Alignment Gauge |
| | Fast Fill Feature |
| | Color LCD |
| | Water Deionizer |
| | Quick Conversational Programming |
| | Automatic Water Level Control |
| | 64 Bit PC Based CNC Control |
| | Automatic Wire Threader with Wire Chopper |
| | Wire Transfer |
| | Fluid Filter |
| | V350-V Power Supply |
Type Your Notes About This Machine In The Space
Below Before Printing
TERMS: Cash or Cashiers Check with order,
and all equipment is FOB on floor from sold location unless
otherwise stated. All equipment subject to prior sales and is
exclusive of any government tax. Equipment descriptions are intended
only as a guide and their accuracy is not guaranteed. CONDITIONS:
Item(s) are sold "As Is, Where Is" unless other arrangements have
been made and conveyed in writing. There are no warranties, which
extend beyond the description on the face hereof; quotation subject
to change without notice. All agreements and/or contracts made by
sales person are subject to approval. -EQUIPMENT SAFETY: It is the
buyer's/user's responsibility to provide proper safety devices and
equipment to safeguard persons from harm resulting from any
particular use, operation or set-up, and to adequately safeguard the
equipment conform to all Federal, State and Local Government Safety
Standards and all Industrial Standards. - INDEMNIFICATION:
Buyer/User agrees to Indemnify and hold harmless Seller and
Salespersons from any and all claims or liabilities caused by or
arising from the equipment on the face hereof. All equipment quoted
is subject to prior sale. It is purchasers responsibility to verify
machine condition, specifications and pay any and all applicable
taxes.