Below are the specs we have on
file for this machine. Please contact Machine Tools
24-7 if you have any questions.
Machine ID | Year | Manufacturer | Model | Control |
16242 | 2012 | Mazak | Integrex 300 S | Mazatrol Matrix |
| Description | Spec Values |
Capacity: | Maximum Swing / Swing Over Carriage | 33.5" / 33.5" |
| Maximum Turning Diameter / Length | 33.5" / 60" |
Main Spindle: | Speeds | 40 - 4,000 RPM |
| Spindle Bore / Bar Cap / Spindle Nose | 3.58" / 3.3" / A2-8 |
| Motor (30 min. / cont.) | 40 / 30 HP |
Sub-Spindle: | Speeds | 40 - 4,000 RPM |
| Spindle Bore / Bar Cap / Spindle Nose / Indexing | 3.58" / 3.25" / A2-8 |
| Motor (30 min. / cont.) | 35 / 25 HP |
Turrets: | Number of Positions (ATC) | 36 Tool ATC - HSK-63 |
Travels: | X-Axis Travel | 24.8" |
| Z-Axis Travel | 62.41" |
| Y-Axis Travel / W-Sub Spindle Travel | 4.53" +/- / 61.97" |
| B-Axis Swing / C-Indexing | 210° / 360,000° |
Rotary Tools: | Rotary Tool Speed | 12,000 RPM |
| Rotary Tool Motor | 25 HP |
Rapids: | Rapid Traverse (X / Z) | 1,496 / 1,496 IPM |
| Rapid Traverse (Y / Sub Spindle) | 1,024 / 1,181 IPM |
Tailstock: | Stroke of Body / Quill | 55" / 5.1" |
| Quill Diameter / Taper | 5.19" / #4 MT |
Dimensions: | Floor Space (L x W x H) | 166" x 91" x 115" |
| Weight (approx) | 40,000 Lbs |
| Equipped With |
Additional Info.: | 10" Hydraulic Chuck |
| EIA / ISO Function |
| RS-232 Port |
| Tool Presetter |
| PCMICIA Port |
| Chip Conveyor |
| HSK-63 Spindle |
Note: | 2011 Machine Installed New in 2012 |
Click Here To Print Quote - | 16242 |
Click Here to Email Request Quote
TERMS: Cash or Cashiers Check with order,
and all equipment is FOB on floor from sold location unless
otherwise stated. All equipment subject to prior sales and is
exclusive of any government tax. Equipment descriptions are intended
only as a guide and their accuracy is not guaranteed. CONDITIONS:
Item(s) are sold "As Is, Where Is" unless other arrangements have
been made and conveyed in writing. There are no warranties, which
extend beyond the description on the face hereof; quotation subject
to change without notice. All agreements and/or contracts made by
sales person are subject to approval. -EQUIPMENT SAFETY: It is the
buyer's/user's responsibility to provide proper safety devices and
equipment to safeguard persons from harm resulting from any
particular use, operation or set-up, and to adequately safeguard the
equipment conform to all Federal, State and Local Government Safety
Standards and all Industrial Standards. - INDEMNIFICATION:
Buyer/User agrees to Indemnify and hold harmless Seller and
Salespersons from any and all claims or liabilities caused by or
arising from the equipment on the face hereof. All equipment quoted
is subject to prior sale. It is purchasers responsibility to verify
machine condition, specifications and pay any and all applicable
taxes./span>
Manufacturer | Model | Machine ID | Machine Photos |
Mazak | Integrex 300 S | 16242 | |
Mazak | Integrex 300 S | 16242 | |