Below are the specs we have on
file for this machine. Please contact Machine Tools
24-7 if you have any questions.
| Machine ID | Year | Manufacturer | Model | Control |
| 15963 | 2012 | Haas | EC-1600 | Haas Control |
| | Description | Spec Values |
| Table: | Table Size | 64" x 32" |
| | Table Load | 10,000 Lbs |
| Travels: | X-Axis Travel | 64" |
| | Y-Axis Travel | 40" |
| | Z-Axis Travel | 32" |
| Spindle: | Spindle Speeds Minimum - Maximum | 50 - 6,000 RPM |
| | Spindle Taper | 50 Taper |
| | Main Motor (30 min / continuous) | 30 / 20 HP |
| Tool Changer: | Tool Changer Positions | 30+ 1 ATC |
| Rapids: | Rapid Traverse (X, Y & Z ) | 540 IPM |
| | Feed Rate | 0.01 - 500 IPM |
| Dimensions: | Floor Space (L x W x H) | 173" x 135" x 119" |
| | Weight (approx.) | 32,500 Lbs |
| | Equipped With |
| Additional Info.: | Two (2) Speed Geared Head |
| | Enhanced Remote Jog Handle |
| | 4th Axis Interface |
| | High Pressure Coolant Through Spindle (1,000 psi) |
| | Programmable Coolant |
| | Chip Conveyor |
| | Haas HRT-600 Rotary Table With Tailstock |
| | Wireless Probing System |
| | Ethernet Port |
| Note: | Low Hours. Machine Can Be Purchased Without Rotary Table |
| Click Here To Print Quote - | 15963 |
Click Here to Email Request Quote
TERMS: Cash or Cashiers Check with order,
and all equipment is FOB on floor from sold location unless
otherwise stated. All equipment subject to prior sales and is
exclusive of any government tax. Equipment descriptions are intended
only as a guide and their accuracy is not guaranteed. CONDITIONS:
Item(s) are sold "As Is, Where Is" unless other arrangements have
been made and conveyed in writing. There are no warranties, which
extend beyond the description on the face hereof; quotation subject
to change without notice. All agreements and/or contracts made by
sales person are subject to approval. -EQUIPMENT SAFETY: It is the
buyer's/user's responsibility to provide proper safety devices and
equipment to safeguard persons from harm resulting from any
particular use, operation or set-up, and to adequately safeguard the
equipment conform to all Federal, State and Local Government Safety
Standards and all Industrial Standards. - INDEMNIFICATION:
Buyer/User agrees to Indemnify and hold harmless Seller and
Salespersons from any and all claims or liabilities caused by or
arising from the equipment on the face hereof. All equipment quoted
is subject to prior sale. It is purchasers responsibility to verify
machine condition, specifications and pay any and all applicable
taxes./span>
| Manufacturer | Model | Machine ID | Machine Photos |
| Haas | EC-1600 | 15963 |  |
| Haas | EC-1600 | 15963 |  |
| Haas | EC-1600 | 15963 |  |
| Haas | EC-1600 | 15963 |  |
| Haas | EC-1600 | 15963 |  |
| Haas | EC-1600 | 15963 |  |
| Haas | EC-1600 | 15963 |  |
| Haas | EC-1600 | 15963 |  |
| Haas | EC-1600 | 15963 |  |
